• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.539-547
• /
• 1992

Considering the field of high frequency or broad-band signal filtering with high speed, we pro-pose optical fiber filters which consist of directional couplers and optical fiber delay elements. Fiber delay line signal processor Is operated with Incoherent optical carrier because of Its simplicity. Due to the characteristics of the directional coupler which Is basic element of optical fiber filter a new design method which Is different from that of usual digital filter is required. By considering the characteristics of directional coupler and in order to make good use of the optical signal energy, we have given the design formulae and the conditions of optical fiber filters for the direct and the lattice form.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.484-487
• /
• 2004

Symmetric directional couplers are widely used in interferometers, switches, and various signal processing devices. Recently, several optical couplers using multimode fibers were reported, but these suffer from inefficient coupling of light into a branching fiber and/or low directivity. This paper presents the measurement and analysis of loss in the connection of optical fibers via the optical directional couplers. The functionality of the device is based on the principle that is symmetrical, the power in excited mode can be unambiguously directed into one of the output channel by varying and of its parameters. In this experiment, we measure the power of loss in the optical directional coupler at various radius of curvature. Before the measurement of loss in x-coupler, we polish the contact of the fiber surface in order that light can penetrate through another port. The results show that, when the radius of curvature is increased, the loss power is decreased and also approaches of the straight line case.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.113-116
• /
• 1993

A guided - wave electro - optical modulatored directional coupler $2{\times}2$ was fabricated on X-cut $LiNbO_3$ by proton exchange wi th self-aligned method. The Electode pattern was formed by the four extra gap electrode separtion within self-aligned electrode mask. Initial cross over state turned that by controlling the anneal ing process and self-aligned electrodes are used in fabricating the electro-optical modulatored directional coupler $2{\times}2$. The modulatored directional coupler $2{\times}2$ has very good figures of merits: the measured crosstalk was -28.2 dB and the modulating valtage of 3.2[V].

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.353-359
• /
• 2006

As for the characteristic of elements for a lot of communication used in light communication systems, it is affected according to structure of directional coupler. We carried out study on a characteristic of the directional coupler which had waveguide structure to have perturbation phenomenon in this paper and ran simulation on the characteristic that we changed structure of directional coupler too, and was got. Confirmation was able to do that it operated with an optical filter, and the directional coupler which added waveguide structure to produce perturbation phenomenon by the results was able to confirm what we adjusted duty ratio of waveguide structure too, and operated with a more excellent optical filter. Through simulation, the case that duty ratio changed than the case that duty ratio of waveguide structure was $50\%$ was able to get an excellent answer characteristic of a -l8dB degree.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.373-376
• /
• 2002

An asymmetrical directional coupler with two nonidentical fibers has, for the first time, been proposed and analyzed for an EDFA gain flattening filter (GFF). The characteristics of the transmission spectra of the GFFs have been theoretically investigated for the core spacings, the coupling lengths and the fiber parameters of the asymmetrical directional coupler. The analytical results show that an EDFA gain spectrum with flatness of ~7 ㏈ can be flattened to within $\pm$0.75 ㏈ over a bandwidth of 30 nm by using the asymmetrical directional coupler-based GFF.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.219-221
• /
• 1990

Y-branch directional coupler type optical modulators with three different coupling lengths were fabricated on z-cut LiNbO3 and tested at λ-1.3${\mu}{\textrm}{m}$. One device gad an exact coupling length for complete power transfer and two other devices had coupling lengths. It was confirmed that, for dc operation, experimental results agreed well with theoretical results.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.493-494
• /
• 2006

Fabrication-error tolerant directional couplers are designed and analyzed. In the wavelength region of $1.55{\mu}m$, the coupling characteristics of the 3dB coupler is 50${\pm}$4%, when the waveguide width error is ${\pm}0.2{\mu}m$.

• Korean Journal of Optics and Photonics
• /
• v.33 no.4
• /
• pp.137-145
• /
• 2022

A directional coupler device, one of the fundamental components of photonic integrated circuits, distributes optical power by evanescent field coupling between two adjacent optical waveguides. In this paper, the design process for manufacturing a directional coupler device is reviewed, and the accuracy of the design results, as seen from the characteristics of the actual fabricated device, is confirmed. When designing a directional coupler device through a two-dimensional (2D) beam-propagation-method (BPM) simulation, an optical structure is converted to a two-dimensional planar structure through the effective index method. After fabricating the directional coupler device array, the characteristics are measured. To supplement the 2D-BPM results that are different from the experimental results, a 3D-BPM simulation is performed. Although 3D-BPM simulation requires more computational resources, the simulation result is closer to the experimental results. Furthermore, the waveguide core refractive index used in 3D-BPM is adjusted to produce a simulation result consistent with the experimental results. The proposed design procedure enables accurate design of directional coupler devices, predicting the experimental results based on 3D-BPM.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.300-301
• /
• 2004

Effect of refractive index difference between core and cladding on the characteristics of a vertical directional coupler using double sided deep ridge waveguide structure is investigated.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.162-167
• /
• 2005

An optical directional coupler, which consists of quantum wells with nanothickness, is designed by using Modal Transmission Line Theory (MTLT). To demonstrate the validity and usefulness, the propagation characteristics and the coupling efficiencies are rigorously evaluated at nanoscale couplers, which consist of double quantum wells with different effective masses. The numerical result reveals that the coupling efficiency of nanoscale couplers is maximized at a coupling length 2052.3 nm, if the total electron energy is 83.9 meV. Furthermore, the coupler operates as a filter with narrower band as the barrier thickness increases.