• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.103-108
• /
• 2013

The operation of a Doppler wind LIDAR in a mobile environment is very sensitive to shocks and vibrations, which can cause critical failures such as misalignment of the optical path and damage to optical components. To be able to stabilize the LIDAR and to perform wind field measurements in motion, a shock absorption and vibration isolation system was designed and implemented. The performance of the vehicle-mounted Doppler wind LIDAR was tested in motion, first in a circular test route with a diameter of about 30 m and later in regular expressway traffic. The vibration isolation efficiency of the system was found to be higher than 82% in the main vibration area and shock dynamic deflection was smaller than maximal deflection of the isolator. The stability of the laser locking frequency in the same mobile environment before and after the vibration isolation system installation was also found to be greatly improved. The reliability of the vibration isolation system was confirmed by good results of the analysis of the LIDAR data, in particular the plane position indicator of the line of sight velocity and the wind profile.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.607-616
• /
• 2019

The video deflectometer based on digital image correlation is a non-contacting optical measurement method which has become a useful tool for characterization of the vertical deflections of large structures. In this study, a novel imaging model has been established which considers the variations of pitch angles in the full image. The new model allows deflection measurement at a wide working distance with high accuracy. A monocular video deflectometer has been accordingly developed with an inclination sensor, which facilitates dynamic determination of the orientations and rotation of the optical axis of the camera. This layout has advantages over the video deflectometers based on theodolites with respect to convenience. Experiments have been presented to show the accuracy of the new imaging model and the performance of the monocular video deflectometer in outdoor applications. Finally, this equipment has been applied to the measurement of the vertical deflection of Yingwuzhou Yangtze River Bridge in real time at a distance of hundreds of meters. The results show good agreement with the embedded GPS outputs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.189-190
• /
• 2007

• 한국광학회지
• /
• 제8권4호
• /
• pp.315-319
• /
• 1997

광편향은 광굴절결정내의 두 기록빔 간섭에 의해 유도된 동적 광굴절 부피격자를 이용한다. 본 논문에서는 외부 전기장을 인가할 필요가 없으며, 낮은 광세기에서도 쉽게 광굴절 부피격자가 유도되는 CeO$_{2}$가 0.05Wt.% 도핑된 Sr$_{0.6}$Ba$_{0.4}$Nb$_{2}$O$_{6}$(Ce-SBN:60)결정의 동적 특성을 이용하여 광편향기를 구현하고 해석하였다. 그리고, Ce-SBN:60결정의 광파결합특성을 조사하기 위해 2광파 혼합을 통해 결정의 최대결합계수, 유효전하밀도, 기록빔의 세기비에 따른 회절효율 및 회절효율의 시간응답특성을 측정하고 해석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2134-2136
• /
• 2004

A microcantilever-based biosensor with piezoresistor has been fabricated using surface micromachining technique, which is cost effective and simplifies a fabrication procedure. To evaluate the characteristics of the cantilever, the cystamine terminated with thiol was covalently immobilized on the gold-coated side of the cantilever and glutaraldehyde that would be bonded with amine group in the cystamine was injected subsequently. This process was characterized by measuring the deflection of the cantilever in real time monitoring. Using a piezoresistive read-out and a well-known optical beam deflection method as well carried out the measurement of deflection.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.375-380
• /
• 2007

The bimetals of home appliances are mainly manufactured by cladding process and these are almost consisted with Cu alloy and Ni alloy. But it is very difficult to clad these alloys, because the brittle $Cu_3O_4$ oxide film formed easily on Cu alloy surface during cladding process. Clad rolling and heat treatment processes were applied for the development of bimetals by using the Ni alloy and the 3 types of Cu alloys. Optical microstructure, micro-hardness, specific resistance, and deflection and line profile of newly processed bimetals specimens were observed and measured in this paper. Inter-diffusion was observed between Cu and Ni element in the interface of heat treated Cu alloy and Ni alloy clad material. The C1220 and Invar36 clad material showed the best property of deflection among the 3 kind of clad materials.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.10-14
• /
• 2006

FBG sensors are able to measure the strain of structures more easily and durable than electronic resistance gages and thus many researches are on the way to apply the FBG sensor for response monitering of infrastructures. This study investigates the deflection estimation technique using FBG sensors. Several FBG sensors are multiplexed in single optical fiber and installed. in parallel pairs along the length of the structure. The measured strains at the top and bottom of a cross section can be transferred to the curvature of the section which can be used to calculate its displacement. It has been demonstrated that the estimated deflections using the FBG sensor are compared well with the readings from displacement transducers. The results show that the proposed instrumentation technique is capable of estimating the vertical deflection of the structures for various loading conditions including impact and dynamic loads, which is crucial in the structural health monitoring.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.436-442
• /
• 1997

The bimodal distribution of CuCl nano-crystals precipitated in alumino-borosilicate glass matrix (30SiO2-45B2O3-7.5Al2O3-7.5Na2O-7.5CaO-2.5GeO2(mole %)) was investigated by TEM and the temperature dependent optical spectroscopy. Two types of CuCl particles with different size were observed by TEM and it was confirmed by the splitting of Z3 absorption peak at low temperature and the occurrence of deflection point in the optical spectra with temperature.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.252-253
• /
• 2001

The purpose of this work is to investigate the dynamics of an atomic wave packet whose center-of-mass motion is quantized in a resonant standing wave cavity field. The mechanical aspect of the matter-field interaction has been extensively studied In the theme of atomic beam deflection, diffraction, or reflection by a standing-wave field. The effect caused in the behavior of spontaneous emission by the atomic center-of-mass motion, classical and quantized, in a standing wave cavity mode has been studied, and recently the one-atom laser with quantized atomic center-of-mass motion has been investigated. (omitted)

• 한국광학회지
• /
• 제15권2호
• /
• pp.171-176
• /
• 2004

광 편향기가 집적된 레이저 다이오드를 제작하고 편향기 주입전류에 따른 레이저 다이오드의 특성 변화 및 출력광의 편향을 조사하였다. 레이저 다이오드와 집적된 수동 도파로의 상부 클래드 층의 일부분에 광 편향기를 집적하고, 편향기의 전류 주입에 따른 굴절률 변화를 유도하여 출력광의 편향이 발생하도록 하였다. 편향기의 전류 주입에 따른 출력광의 특성변화를 조사하기 위하여 편향기 주입 전류에 따른 레이저 다이오드의 문턱 전류(threshold current), 발진 효율(slope efficiency) 및 출력광 스펙트럼을 측정하였다. 측정 결과, 편향기 전류의 증가에 따라 출력광의 문턱 전류는 증가하고, 발진 효율은 감소하는 경향을 나타내었으나 출력광의 스펙트럼에는 영향을 주지 않는 특성을 나타내었다. 또한, 이론적 계산을 통해 광 편향기를 지나는 광이 편향됨을 확인하고, 편향기 집적 레이저 다이오드에서 출력되는 광의 far-field pattern을 측정하여 편향기 주입 전류에 따른 출력광의 편향을 실험적으로 확인하였다. 제작된 광 편향기 집적 레이저 다이오드에서 15 ㎃의 광 편향기 주입 전류 변화에 대해서 1.9$^{\circ}$의 편향각 변화를 측정 할 수 있었다.