• 한국소음진동공학회논문집
• /
• 제20권8호
• /
• pp.727-733
• /
• 2010

Optical tables provide a platform for the establishment and test of measurement systems which use Laser. Therefore, not only static characteristics such as surface flatness, static stiffness and etc. but dynamic response characteristics is very important design parameter. The dynamic stiffness is generally estimated through the modal test, and compliance is used as a representative performance standard. Recently there is an example of defining the dynamic deflection coefficient and using it as a new performance standard of the dynamic stiffness, but it is not generalized yet in industry. In this study, we verify the validity of existing DDC calculus by making an experiment on granite. And for improvement in damping performance of optical tables, we are going to evaluate the effect of fillers on the compliance, then develop an epoxy adhesive based on the result of this experiment.

• 대한기계학회논문집B
• /
• 제36권9호
• /
• pp.961-964
• /
• 2012

원자현미경에서 시편의 높이정보를 얻기 위한 마이크로 캔틸레버의 굽힘은 optical lever 방식이나 간섭원리에 기반한 방식으로 이루어졌으나, 부피와 가격적인 측면에서 이들 방식은 많은 개선의 여지를 가지고 있다. 따라서 본 논문에서는 이전 방식의 단점을 극복하기 위하여, 간단한 구조로 구현이 가능한 비점 수차방식을 기반으로한 광픽업헤드를 이용하여 마이크로 캔틸레버의 굽힘 측정시스템을 개발하였다. 개발된 시스템은 실험실에서 제작한 원자현미경에 적용하여 그 가능성을 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권9호
• /
• pp.495-501
• /
• 2000

This paper presents a method to minimize the initial deflection of a multi-layer piezoelectric microactuator without loosing its piezoelectric deflection performance required for light modulating micromirror devices. The multi-layer piezoelectric actuator composed of PZT silicon nitride and platinum layers deflects or buckles due to the gradient of residual stress. Based on the structural analysis results and relationship between process conditions and mechanical properties we have modified the fabrication process and the thickness of thin film layers to reduce the initial residual stress deflection without decreasing its piezoelectric deflection performance. The modified designs fabricated by surface-micromachining process achieved the 77% reduction of the initial deflection compared with that of the conventional method based on the measured micromechanical material properties is applicable to the design refinement of multi-layer MEMS devices and micromechanical structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.81-82
• /
• 2012

• ETRI Journal
• /
• 제30권2호
• /
• pp.282-289
• /
• 2008

We propose a new mini-slot transmission scheme for a passive optical network (PON) in which each customer can be switched either to access mode or to internetworking mode dynamically. In this paper, we present the system implementation (called LAN-PON) as well as the performance of the proposed transmission scheme to illustrate its feasibility and benefits. A mini-slot scheme can rapidly reduce the queuing delay, which increases due to the flooding of the deflected packets in a deflection scheme. We evaluate the impact of mode switching time on the bandwidth gain (throughput) and delay of local area network (LAN) traffic in the LAN-PON with a mini-slot scheme. We also analyze a theoretical delay model of the proposed scheme. The simulation results demonstrate that switching time has an impact on LAN performance, and the average packet delay of the proposed scheme is significantly improved compared to that of the deflection scheme.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.804-812
• /
• 2003

This paper introduces optical methods for in-situ measurement of surface temperature and pressure transient in thermal processes having nanosecond time scales. In the temperature measurement, a p -Si thin film whose refractive index is calibrated as a function of temperature is embedded beneath the sample surface and the photothermal reflectance is monitored for estimating the surface temperature. The pressure transients are measured using the photoacoustic optical deflection method. The experimental technique is used to analyze the nanosecond laser induced vaporization process that is central to numerous engineering and bio-medical applications. Based on the experimental results, discussions are made on the experimental technique and the physical mechanisms of laser-driven explosive vaporization phenomena.

• 한국정보통신학회논문지
• /
• 제16권9호
• /
• pp.1906-1914
• /
• 2012

본 논문은 우회경로를 적용하는 JET 스위칭 방식의 광 버스트 스위치 네트워크에서 클래스간 비율적 서비스 차별화 방안을 제안한다. 제안하는 방식은 동적파장할당, 선취권, 그리고 우회경로 방식을 적용한다. 동적파장할당은 주기적인 측정을 통해 클래스간 손실 비율의 조정이 요구되는 경우에 높은 클래스에 할당된 파장의 수를 동적으로 증가시킴으로서 높은 클래스의 손실률도 낮추면서 동시에 상대적 손실 비율도 유지한다. 가용한 파장이 모두 사용된 경우에는 낮은 클래스의 트래픽이 사용하던 파장을 높은 클래스의 트래픽에 이양하는 선취권 방식을 적용한다. 동시에 우회경로를 적용하여 높은 클래스나 낮은 클래스의 손실률을 낮춘다. 제안된 방식에 대한 큐잉 기반의 분석 모델이 도출되고, 도출된 모델을 기반으로 성능분석을 수행하여 제안모델이 비율적 서비스 차별화를 제공함을 입증한다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.215-216
• /
• 2008

Electricity unified field is described based on magnetic theory. Maxwell Einstein Lorentz Equation & pair particle photon model was introduced for Photonics. Refractive index is calculated as deceleration and deflection of photon due to photo-induced surface magnetism. MEL equation was proved with magneto-jet assumption.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1998년도 제15회 광학 및 양자전자 학술발표회 논문집
• /
• pp.170-171
• /
• 1998

Here are proposed the tunable laser for optical memory which uses the acousto-optic deflector. This laser includes the acousto-optic deflector in the Littrow mount configuration so that we may control the beam deflection by means of the induced RF. Consequently, we can achieve the higher speed and accuracy to compare with the Littrow monut configuration only.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.523-530
• /
• 2014

Machine material and structural strain are critical factors for appraising mechanical properties and safety. Particularly in three and four-point bending tests, which appraise the deflection and flexural strain of an object due to external force, measurements are made by the crosshead movement or deflection meter of a universal testing machine. The Digital Image Correlation (DIC) method is one of the non-contact measurement methods. It uses the image analyzing method that compares the reference image with the deformed image for measuring the displacement and strain of the objects caused by external force. Accordingly, the advantage of this method is that the object's surface roughness, shape, and temperature have little influence. However, its disadvantage is that it requires extensive time to compare the reference image with the deformed image for measuring the displacement and strain. In this study, an algorithm is developed for DIC that can improve the speed of image analysis for measuring the deflection and strain of an object caused by a three-point bending load. To implement this algorithm for improving the speed of image analysis, LabVIEW 2010 was used. Furthermore, to evaluate the accuracy of the developed fast correlation algorithm, the deflection of an aluminum specimen under a three-point bending load was measured by using the universal test machine and DIC measurement system.