• ETRI Journal
• /
• v.24 no.2
• /
• pp.69-81
• /
• 2002

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP-centric signaling and control architecture based on the generalized multi-protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross-connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS-based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user-network interface and network-network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to generalized MPLS signaling.

• Journal of Information Technology Applications and Management
• /
• v.26 no.6
• /
• pp.103-117
• /
• 2019

Demand for high power motors is rapidly increasing as the 4th industry and convergence technology has recently emerged. In order to produce high-strength permanent magnets, the magnets used for magnetization have been increased from DC 300V in the 1970s to DC 2.5kV in the 2010s, Up to DC 10kV in the 2030s, It is expected that higher voltage will be used to magnetize. However, in the case of a magnetizer using an existing electric signal control device, it is necessary to use a control device with a high-voltage insulation function in case a high voltage used for magnetization is leaked to the control device. If a short circuit accident occurs, the controller must be shut down and serious problems such as excessive repair costs arise. In this study, a control system adopting optical communication method instead of electric signal control method is proposed to prevent leakage currents in high-voltage magnetizer. We design a transmitter(Tx) and a receiver(Rx) device for the optical communication control device and implemented a prototype connecting the optical cable. In order to demonstrate the utility of high-voltage magnetizer using the optical communication control device, we analyzed the initial cost and the yearly cost for the years to analyze the net present value. As a result, In the case of the low-voltage magnetizer, the electric signal control method cost less, As the operating voltage of the magnetizer becomes higher. It is confirmed that it takes less cost when the optical communication control device is used.

• Journal of the Optical Society of Korea
• /
• v.11 no.4
• /
• pp.149-152
• /
• 2007

We present a simple and efficient management scheme for gain control of EDFA by using standardized network management protocol(Simple Network Management Protocol) and operating the optical amplifier in a link-control scheme. We have demonstrated the proposed scheme by using SNMP Simulator and optical simulation software package.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.553-558
• /
• 2012

An effort for motion control of multi-axis in robot have been continued recently. In this paper, we propose implementation method for AC servo driver that can be easily motion control of multi-axis in robot. This proposed method implement EtherCAT communication technologies of bi-directional optical communication based on single optical core method that applied WDM for communication between control stage which is upper and AC servo drive stage.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2018

The technology convergence of television, communication, and computing devices enables the rich social and entertaining experience through Smart TV in personal living space. The powerful smart TV computing platform allows to provide various user interaction interfaces like IR remote control, web based control, body gesture based control, etc. The presently used smart TV interaction user control methods are not efficient and user-friendly to access different type of media content and services and strongly required advanced way to control and access to the smart TV with easy user interface. This paper propose the optical wireless communication (OWC) based remote controller design for Smart TV using smart device Flashlights. In this approach, the user smart device act as a remote controller with touch based interactive smart device application and transfer the user control interface data to smart TV trough Flashlight using visible light communication method. The smart TV built-in camera follows the optical camera communication (OCC) principle to decode data and control smart TV user access functions according. This proposed method is not harmful as radio frequency (RF) radiation does it on human health and very simple to use as well user does need to any gesture moves to control the smart TV.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.215-222
• /
• 2014

In this paper, we discuss optical encryption and decryption considering wireless communication channels. In wireless communication systems, the wireless channel causes noise and fading effects of the transmitted information. Optical encryption technique such as double-random-phase encryption (DRPE) is used for encrypting transmitted data. When the encrypted data is transmitted, the information may be lost or distorted because there are a lot of factors such as channel noise, propagation fading, etc. Thus, using digital modulation and maximum likelihood (ML) detection, the noise and fading effects are mitigated, and the encrypted data is estimated well at the receiver. To the best of our knowledge, this is the first report that considers the wireless channel characteristics of the optical encryption technique.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.122-130
• /
• 2015

This paper presents a 6 Gb/s 4-channel arrayed transimpedance amplifiers (TIA) with the gain control for 4-channel passive optical network in $0.13{\mu}m$ complementary metal oxide semiconductor (CMOS) technology. A regulated cascode input stage and inductive-series peaking are proposed in order to increase the bandwidth. Also, a variable gain control is implemented to provide flexibility to the overall system. The TIA has a maximum $98.1dB{\Omega}$ gain and an input current noise level of about 37.8 pA/Hz. The die area of the fabricated TIA is $1.9mm{\times}2.2mm$ for 4-channel. The power dissipation is 47.64 mW/1ch.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.355-358
• /
• 2008

In the current GPON market and standard, the line bit rate requirement is changing from 1.25 Gbps to 2.5 Gbps. We fabricate a 2.5 Gbps burst-mode receiver with commercially available blocks and optimize it with an APD bias control. A burst-mode measurement setup is made for the full compliance test with the GPON standard. The device meets the partially defined 2.5 Gbps specs in the current ITU G.984.2 standard, also, supports 1.25 Gbps specs for the coexistence issue in an access network. The full-compliant measurement values can be used as a guideline for fixing "for further study" specs in the current GPON standard at 2.5 Gbps.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.203-209
• /
• 2012

Visible light communications (VLC) use modern solid-state light-emitting diodes (LEDs) to broadcast information. Emerging white-light LEDs allow the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting design using one-chip-type white LEDs is proposed for efficient illumination and optical wireless communications under the existence of several obstacles. Lighting and communication performance are analyzed to show the effectiveness of the proposed LED lighting. Specifically, the signal-to-noise ratio considering intersymbol interference and the bit-error rate of variable pulse position modulation (VPPM) with dimming control are considered.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.119-126
• /
• 2003

The problem of tracking moving objects in a video stream is discussed in this pa-per. We discussed the popular technique of optical flow for moving object detection. Optical flow finds the velocity vectors at each pixel in the entire video scene. However, optical flow based methods require complex computations and are sensitive to noise. In this paper, we proposed a new method based on the Hough transform and on voting accumulation for improving the accuracy and reducing the computation time. Further, we applied the Boo-lean based edge detector for edge detection. Edge detection and segmentation are used to extract the moving objects in the image sequences and reduce the computation time of the CHT. The Boolean based edge detector provides accurate and very thin edges. The difference of the two edge maps with thin edges gives better localization of moving objects. The simulation results show that the proposed method improves the accuracy of finding the optical flow vectors and more accurately extracts moving objects' information. The process of edge detection and segmentation accurately find the location and areas of the real moving objects, and hence extracting moving information is very easy and accurate. The Combinatorial Hough Transform and voting accumulation based optical flow measures optical flow vectors accurately. The direction of moving objects is also accurately measured.