• 반도체디스플레이기술학회지
• /
• 제3권1호
• /
• pp.21-26
• /
• 2004

Recently with the development of power switching device and DSP which has peripheral devices to control AC servo system, the servo technology has met a new development opportunity. Those things make it possible to reduce the time of developing a AC servo system. Fixed point DSP such as TMS320F240x, and TMS320F28x series have a disadvantage in calculating floating number where TMS320C32 or TMS320C31 are floating point DSP. However they usually become a complex hardware system to implement the AC servo system and it increases the cost. In this study, a DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F28l2-version C which has the performance of fast speed, 150MIPS, and a rich peripheral interface such as a 12bit high speed AD converter, QEP(Quadrature Encoder Pulse) circuit, PDPINT(Power Drive Protect Interrupt), SVPWM module and dead time module are used. This paper presents a method to overcome fixed point calculating using scaling all parameters. Also space vector pulse width modulation (SVPWM) using off-set voltage and a digital PI control are implemented to the servo system.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.110-114
• /
• 2014

We propose a low temperature sol-gel ZnO/Ag nanowire composite thin film to fulfill low temperature and low cost requirements, which are essential criteria in future flexible electronic devices. In this proposed thin film, Ag nanowire plays the role of electrical conduction, and sol-gel ZnO provides a structural medium with a high visible transmittance. Low temperature restriction in the sol-gel fabrication process prevents sufficient oxidation of Zn acetate precursors, which were solved by a post-coating treatment with ultraviolet light irradiation. Composite thin film formation was performed by spin coating methods with a mixed precursor solution or in a sequential manner. We obtained an average visible transmittance larger than 85% and a sheet resistance smaller than $50{\Omega}/sq$. After optimization in a fabricated composite transparent conductive thin film with the thickness around 100 nm. Similar experimental demonstration in a flexible substrate (polyethyleneterephthalate) was successful, which implies a promising application opportunity of this technology.

• Journal of Information Technology Applications and Management
• /
• 제14권3호
• /
• pp.95-113
• /
• 2007

To minimize IT operational risks and the opportunity cost for lost business hours. it is necessary to have preparedness in advance and mitigation activities for minimization of a loss due to the business discontinuity. There are few cases that banks have a policy on systematic management, system recovery and protection activities against system failure. and most developers and system administrators response based on their experience and the instinct. This article focuses on the mitigation model development for minimizing the incidents of disk unit in IT operational risks. The model will be represented by a network model which is composed of the three items as following: (1) the risk factors(causes, attributes and indicators) of IT operational risk. (2) a periodic time interval through an analysis of historical data. (3) an index or an operational regulations related to the examination of causes of an operational risk. This article will be helpful when enterprise needs to hierarchically analyze risk factors from various fields of IT(information security, information telecommunication, web application servers and so on) and develop a mitigation model. and it will also contribute to the reduction of operational risks on information systems.

• 의학교육논단
• /
• 제16권3호
• /
• pp.132-140
• /
• 2014

Higher education is under unprecedented pressure for quality improvement and cost containment/reduction due to global competition and ever-increasing tuition costs. These twin challenges require an unconventional approach, and massive open online courses (MOOCs) and flipped learning have recently emerged as two promising educational alternatives not only to address the current problems but also to direct the future of education. This paper discusses the rapidly changing environment for education, MOOCs, and flipped learning as learning alternatives, the relationship between MOOCs and flipped learning, and course redesign for the implementation of flipped learning. The case of Ulsan National Institute of Science and Technology (UNIST) is also discussed for benchmarking purposes since it has been pioneering an innovative educational methodology for teaching and learning IT-enabled active learning methods from its inception in 2009. It has redesigned almost 70 courses (20% of all the courses to offer) for flipped learning. The objectives of UNIST's educational experiment are three-fold: improving the quality of education for students, improving teaching productivity for the faculty, and containing/reducing education costs for the university.

• 천문학논총
• /
• 제30권2호
• /
• pp.741-743
• /
• 2015

We have designed and built three cost effective observatories, in distinct models, which can house Schmidt-Cassegrain type small telescopes having aperture sizes up to 16 inches. Using the available small telescopes, we provided the people of Manipura State in the far north-east corner of India the opportunity to observe directly with their own eyes the rare, spectacular events of the solar eclipse of January 15, 2010, lunar eclipse of December 10, 2011 and the transit of Venus of June 6, 2012. Apart from sharing a platform with the public for astronomy education and popularization through public outreach programs such as workshops, seminars and night watch programs, we have also developed a laboratory infrastructure and gained expertise in observational techniques based on photoelectric photometry, CCD imaging, CCD photometry and spectroscopy. Our team has become a partner in the ongoing international 'Orion project' headquartered in Phoenix, Arizona, USA which will be producing high quality photometric and spectroscopic data for five stars in the Orion constellation, namely Betelgeuse (alpha Orionis), Rigel (beta Orionis), Mintaka (delta Orionis), Alnilam (epsilon Orionis) and Alnitak (zeta Orionis). In the present paper, the authors would like to give a detailed report of their activities for the growth of astronomy in the state of Manipur, India.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.211-215
• /
• 2006

In this paper, design and applications of a generalized, versatile and customizable IF signal generator that can model the modernized GPS and Galileo signal is given. It generates IF sampled data that can be directly used by a software receiver. Entire constellation of satellites which is independent of satellite-user geometry is easily determined using a real or simulated ephemeris data. Since the IF center frequency, sampling frequency and quantization bit number are user location dependent parameters, their effects are also considered in IF signal generator. The generalized IF signal generator will be very well suited for the development phase of a software receiver due to its versatility. The full access to the sampling frequency, front-end filter definition and ADC parameters also offers a great opportunity for cost-effective analysis of tracking loops and error mitigation techniques at the receiver level. Interference sources can be easily added to the generator to simulate specific environments. This software IF signal generator can also be used to feed a multi-frequency multi-system software receiver for the prototyping of a combined GPS/Galileo receiver. The test result using the generated signals and a real software receiver shows the effectiveness of the implemented IF signal generator.

• 한국시스템다이내믹스연구
• /
• 제6권1호
• /
• pp.99-123
• /
• 2005

Although the generation market is competitive, the power market is easily exercised the market power by one generator due to its special futures such as a limited supplier, large investment cost, transmission constraints and loss. Specially, as Korea Electric industry restructuring is similar US competitive wholesale electricity market structure which discovered the several evidences of market power abuse, when restructuring is completed the possibility that market power will be exercised is big. Market power interferes with market competitions and efficiency of system. The goal of this study is to investigate the market price effects of the potential market power and the proposed market power mitigation strategy in Korean market using the forecasting wholesale electricity market model. This modeling is developed based on the system dynamics approach. it can analyze the dynamic behaviors of wholesale prices in Korean market. And then it is expanded to include the effect of market condition changed by 'strategic behavior' and 'real time pricing.' This model can generate the overall insights regarding the dynamic impact of output withholding by old gas fire power plant bon as a marginal plant in Korean market at the macro level. Also it will give the energy planner the opportunity to create different scenarios for the future for deregulated wholesales market in Korea.

• 소성∙가공
• /
• 제23권3호
• /
• pp.178-183
• /
• 2014

Continuous casting is a process where molten metal is solidified into a semi-finished billet on a large scale with either a rectangular or round cross section for subsequent processing. The use of continuous casting provides an opportunity for producing material on a practical industrial scale with lower cost than conventional casting. In the current study, the material was fabricated by continuous casting and subsequent extrusion. Tensile tests were conducted on continuous cast ZK60A after extrusion over a range of strain rates at temperatures from 473K to 623K. The alloy exhibits a quasi-superplastic behavior with a maximum recorded elongation of ~250% at 523K when tested with an initial strain rate of $10^{-5}/s$. The experiments give a strain rate sensitivity exponent of 0.3~0.4 and an activation energy of 108 kJ/mol. From the current investigation, it was found that the high-temperature plastic flow of the ZK60A is controlled by a dislocation viscous glide mechanism.

• 수산해양교육연구
• /
• 제16권2호
• /
• pp.238-256
• /
• 2004

As the UN Fish Stocks Agreement has come into effect since 2001, the actual enforceable management on fish stocks in high seas has started. The Regioanl Fisheries Organizations (RFOs) have emerged as management bodies with a real responsible right to manage fish stocks. RFOs establish a strong and strict management rules providing a fishing right only to member countries and preventing all fishing activities from fishing vessels of non-member countries. In addition, RFOs have an own allocation way of fishing opportunity in their waters so that they can prevent the depletion of fish stocks. It is investigated that deep-sea fisheries have a negative impact from strengthening of RFOs' management right. As the amount of catch is reduced by the control of fishing vessel's activities, the level of fishing revenue becomes low. Moreover, as fishing costs such as oil, fishing fees, labor cost increase significantly, the condition of fishing business is getting worse as a result. In order to gain a fishing right for deep-sea fishing vessels in RFOs waters, there is no other alternative way but become a member of RFOs which are relevant to our fisheries but not joined.

• Advances in aircraft and spacecraft science
• /
• 제6권5호
• /
• pp.427-442
• /
• 2019

Small satellites represent an emerging opportunity to realize a wide range of space missions at lower cost and faster delivery, compared to traditional spacecraft. However, small platforms, such as CubeSats, shall increase their actual capabilities. Miniaturized electric propulsion systems can provide the satellite with the key capability of moving in space. The level of readiness of miniaturized electric propulsion systems is low although many concepts have been developed. The present research intends to build a flexible test platform for the assessment of selected small propulsion systems in relevant environment at laboratory level. Main goal of the research is to analyze the mechanical, electrical, magnetic, and chemical interactions of propulsion systems with the modern CubeSat-technology and to assess the performance of the integrated platform. The test platform is a 6U CubeSat hosting electric propulsion systems, providing mechanical, electrical and data interfaces, able to handle a variety of electric propulsion systems, thanks to the ability to regulate and distribute electric power, to exchange data according to several protocols, and to provide different mechanical layouts. The test platform is ready to start the first verification campaign. The paper describes the detailed design of the platform and the main results of the AIV activities.