• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.14-20
• /
• 2017

In this paper, we discuss physical layer security techniques in downlink networks, including eavesdroppers. The main objective of using physical layer security is delivering a perfectly secure message from a transmitter to an intended receiver in the presence of passive or active eavesdroppers who are trying to wiretap the information or disturb the network stability. In downlink networks, based on the random feature of channels to terminals, opportunistic user scheduling can be exploited as an additional tool for enhancing physical layer security. We introduce user scheduling strategies and discuss the corresponding performances according to different levels of channel state information (CSI) at the base station (BS). We show that the availability of CSI of eavesdroppers significantly affects not only the beamforming strategy but also the user scheduling. Eventually, we provide intuitive information on the effect of CSI on the secrecy performance by considering three scenarios: perfect, imperfect, and absence of eavesdropper's CSI at the BS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.798-803
• /
• 2006

An opportunistic scheduling is adopted to improve the capacity of the system by exploiting the multiuser diversity of multiuser MIMO(MU-MIMO) systems. However it requires the large amount of feedback carrying the channel quality information(CQI) of each user to the transmitter, The considered per user unitary and rate control(PU2RC) needs to feedback the preferred preceding index and its CQIs, and it has a defect in scheduling the streams for the grouped user. In order to overcome these drawbacks, a novel feedback reduction scheme is proposed in this paper. It employs transmitter controlled preceding and opportunistic feedback(TCP-OFB). The simulation results demonstrate that TCP-OFB shows comparable performance to PU2RC while it only requires far reduced feedback load.

• Journal of Communications and Networks
• /
• v.9 no.2
• /
• pp.128-135
• /
• 2007

A combined opportunistic multiple beamforming method is presented that the first beam is designed with an aid of channel state information using uplink mid-amble and other beams are orthogonally generated to the first beam sequentially. The power allocation with SINR feedback increases overall throughput for the decentralized systems. The advantages of the proposed scheme is that the first beam is not interfered by other beams guaranteeing quality of service (QoS) and other orthogonal beams are operated opportunistically to obtain multi user diversity. The computer simulation demonstrates that the proposed scheme is effective at a small number of users, which is common in cellular systems, and outperforms conventional spatial division multiple access (SDMA) opportunistic beamforming methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.39-41
• /
• 2017

In this letter, we propose a power control mechanism in order to improve secrecy rate defined as the difference between capacity of main link and wiretap link in a wireless multi-cell multiuser network. Through simulations, we verify that the proposed power control mechanism with threshold based user scheduling can significantly increase secrecy rate in a multi-cell environment.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.892-901
• /
• 2016

In the multi-user multiple-input multiple-output (MIMO) system, orthogonal random beamforming (ORBF) scheme is proposed to serve multiple users simultaneously in order to achieve the multi-user diversity gain. The opportunistic space-division multiple access system (OSDMA-S) scheme performs multiple weighting matrices during the training phase and chooses the best weighting matrix to be used to broadcast data during the transmitting phase. The OSDMA-S scheme works better than the original ORBF by decreasing the inter-user interference during the transmitting phase. To save more time in the training phase, a partly random multiple weighting matrices selection scheme is proposed in this paper. In our proposed scheme, the Base Station does not need to use several unitary matrices to broadcast pilot symbol. Actually, only one broadcasting operation is needed. Each subscriber generates several virtual equivalent channels with a set of pre-saved unitary matrices and the channel status information gained from the broadcasting operation. The signal-to-interference and noise ratio (SINR) of each beam in each virtual equivalent channel is calculated and fed back to the base station for the weighting matrix selection and multi-user scheduling. According to the theoretical analysis, the proposed scheme relatively expands the transmitting phase and reduces the interactive complexity between the Base Station and subscribers. The asymptotic analysis and the simulation results show that the proposed scheme improves the throughput performance of the multi-user MIMO system.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.444-454
• /
• 2016

Voice service is very demanding in cognitive radio networks (CRNs). The available spectrum in a CRN for CR users varies owing to the presence of licensed users. On the other hand, voice packets are delay sensitive and can tolerate a limited amount of delay. This makes the support of voice traffic in a CRN a complicated task that can be achieved by devising necessary considerations regarding the various network functionalities. In this paper, the support of secondary voice users in a CRN is investigated. First, a novel packet scheduling scheme that can provide the required quality of service (QoS) to voice users is proposed. The proposed scheme utilizes the maximum packet transmission rate for secondary voice users by assigning each secondary user the channel with the best level of quality. Furthermore, an analytical framework developed for a performance analysis of the system, is described in which the effect of erroneous spectrum sensing on the performance of secondary voice users is also taken into account. The QoS parameters of secondary voice users, which were obtained analytically, are also detailed. The analytical results were verified through the simulation, and will provide helpful insight in supporting voice services in a CRN.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.2
• /
• pp.53-59
• /
• 2018

This paper proposes a pseudo-random beamforming technique for time-synchronized mobile base stations (BSs) for multi-cell downlink networks which have mobility. The base stations equipped with multi-antennas and mobile stations (MSs) are time-synchronized based on global positioning system (GPS) signals and generate a number of transmit beamforming matrix candidates according to the predetermined pseudo-random pattern. In addition, MSs generate receive beamforming vectors that correspond to the beam index number based on the minimum mean square error (MMSE) using transmit beamforming vectors that make up a number of transmit beamforming matrices and wireless channel matrices from BSs estimated via the reference signals (RS). Afterward, values of received signal-to-interference-plus-noise ratio (SINR) with regard to all transmit beamforming vectors are calculated, and the resulting values are then feedbacked to the BS of the same cells along with the beam index number. Each of the BSs calculates each of the sum-rates of the transmit beamforming matrix candidates based on the feedback information and then transmits the calculated results to the BS coordinator. After this, optimum transmit beamforming matrices, which can maximize a sum-rate of the entire cells, are selected at the BS coordinator and informed to the BSs. Finally, data signals are transmitted using them. The simulation results verified that a sum-rate of the entire cells was improved as the number of transmit beamforming matrix candidates increased. It was also found that if the received SINR values and beam index numbers are feedbacked opportunistically from each of the MSs to the BSs, not only nearly the same performance in sum-rate with that of applying existing feedback techniques could be achieved but also an amount of feedback was significantly reduced.