• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.189-192
• /
• 2005

In this paper, we present a Petri Net (PN) model for reliability analysis of a shared database system. The system consists of components; a database, two processors, two memory and a bus. The database should be operational and at least one of the component should be also operational. Otherwise system will be down. Each component can be failed and repaired individually. Stochastic Reward Net (SRN) Model for reliability analysis is developed. SRN is potential to define various reward function and can be easily used to obtain performance measures. The modeling techniques using variable cardinality, enabling function, timed transition priority in SRN are shown.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.2
• /
• pp.103-114
• /
• 2015

The comprehensive rural village development projects (CRVDP) have been carried out as the core one of the rural development schemes in Korea since 2004. CRVDP included the various rural experience programs to increase rural income and in order to promote rural community development in the project area. This study analyzed the operating management conditions, types and characteristics of the rural experience programs targeting the 168 CRVDPs have been completed so that the recommendations and lessons which were found the usefulness, challenges and improvements to the CRVDP can be provided to be better the same kinds of rural development projects. We identified the relationships between performances such as increasing village income and utilization of rural amenity resources to the CRVDP and operational management types of the rural experience programs as well. Employing principle component analysis and cluster analysis technique, this study found 5 clusters of rural experience programs among 168 CRVDPs. The results of analysis of variance indicated that there were significant the mean differences between clusters such as the utilization of rural amenity resources(0.01), income of rural experience programs(0.1). According to the result of the Chi-squire test, there was very significant differences between internet homepage operation and clusters(0.01). Finally, the analysis of covariance about the income of rural experience programs showed that there were significant the mean differences between clusters(0.05).

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2887-2889
• /
• 2009

An efficient and easy method for one-pot three-component synthesis of amidoalkyl naphthols by the condensation of aromatic/heteroaromatic/aliphatic aldehydes, 2-naphthol and amides or urea under thermal condition at $60^{\circ}C$ in the presence of acidic ionic liquid 1-butyl-3-methylimidazolium hydrogen sulphate ([bmim]$HSO_4$) has been described.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1397-1404
• /
• 2007

It is important to measure the resistive component separately from the total leakage current at power distribution line. It is because electric disasters such as electric shock and fire are caused mainly by the resistive component of the total leakage current. In this paper, a new theory for measuring the resistive component separately from the total leakage current is suggested, and is embodied to an actual circuit using operational amplifiers, analog switch and R-C low pass filter. Through experiments for various cases containing both the resistive and capacitive leakage currents, the suggested algorithm is confirmed to be able to measure the resistive leakage current within 4.1% of error even when the capacitive leakage current is much bigger than the resistive one. The suggested method is expected to lower the total cost because it can be realized using simple and cheap devices, and implies the measuring time can be possibly reduced because the resistive leakage current is computed exactly from the signals during only a half period of power voltage.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.785-796
• /
• 2009

A KALIMER-600 concept which is a type of sodium-cooled fast reactor, has been developed at KAERI. It uses sodium as a primary coolant and is a pool-type reactor to enhance safety. Also, a supercritical carbon dioxide ($CO_2$) Brayton cycle is considered as an alternative to an energy conversion system to eliminate the sodium water reaction and to improve efficiency. In this study, a simplified model for analyzing the thermodynamic performance of the KALIMER-600 coupled with a supercritical $CO_2$ Brayton cycle was developed. To develop the analysis model, a commercial modular modeling system (MMS) was adopted as a base engine, which was developed by nHance Technology in USA. It has a convenient graphical user interface and many component modules to model the plant. A new user library for thermodynamic properties of sodium and supercritical $CO_2$ was developed and attached to the MMS. In addition, some component modules in the MMS were modified to be appropriate for analysis of the KALIMER-600 coupled with the supercritical $CO_2$ cycle. Then, a simplified performance analysis code was developed by modeling the KALIMER-600 plant with the modified MMS. After evaluating the developed code with each component data and a steady state of the plant, a simple power reduction and recovery event was evaluated. The results showed an achievable capability for a performance analysis code. The developed code will be used to develop the operational strategy and some control logics for the operation of the KALIMER-600 with a supercritical $CO_2$ Brayton cycle after further studies of analyzing various operational events.

• Smart Structures and Systems
• /
• v.16 no.6
• /
• pp.1049-1068
• /
• 2015

In the paper, the authors propose the application of operational deflection shapes (ODS) for the detection of structural changes in technical objects. The ODS matrix is used to formulate the spatial filter that is further used for damage detection as a classical modal filter (Meirovitch and Baruh 1982, Zhang et al. 1990). The advantage of the approach lies in the fact that no modal analysis is required, even on the reference spatial filter formulation and other components apart from structural ones can be filtered (e.g. harmonics of rotational velocity). The proposed methodology was tested experimentally on a laboratory stand, a frame-like structure, excited from two sources: an impact hammer, which provided a wide-band excitation of all modes, and an electro-dynamic shaker, which simulated a harmonic component in the output spectra. The damage detection capabilities of the proposed method were tested by changing the structural properties of the model and comparing the results with the original ones. The quantitative assessment of damage was performed by employing a damage index (DI) calculation. Comparison of the output of the ODS filter and the classical modal filter is also presented and analyzed in the paper. The closing section of the paper describes the verification of the method on a real structure - a road viaduct.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1422-1431
• /
• 2015

The reliability of power system components can be affected by a numbers of factors such as the health level of components, external environment and operation environment of power systems. These factors also affect the electrical parameters of power system components for example the thermal capacity of a transmission element. The relationship of component reliability and power system is, therefore, a complex nonlinear function related to the above-mentioned factors. Traditional approaches for reliability assessment of power systems do not take the influence of these factors into account. The assessment results could not, therefore, reflect the short-term trend of the system reliability performance considering the influence of the key factors and provide the system dispatchers with enough information to make decent operational decisions. This paper discusses some of these important operational issues from the perspective of power system reliability. The discussions include operational reliability of power systems, reliability influence models for main performance parameters of components, time-varying reliability models of components, and a reliability assessment algorithm for power system operations considering the time-varying characteristic of various parameters. The significance of these discussions and applications of the proposed techniques are illustrated by case study results using the IEEE-RTS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1096-1101
• /
• 2000

In machine tools, often a gearbox is installed to control the rotating speed of spindle, which sometimes generates problems of noise and vibration due to errors in tooth-meshing. In this study, the characteristics of, noise and vibration of given gearbox for a machine tool are analyzed experimentally. From the measurement, it was observed that the tooth-meshing component of the sound pressure level from the gearbox took its maximum at a specific operational speed. Therefore, the main content of this study is to investigate the reason why the above mentioned characteristics are observed. By investigating the natural frequencies of the components in gearbox, it was found that the natural frequencies of the rotating gear-shaft and gearbox for twisting mode were closely related to the first and second peak of sound pressure levels respectively. Thereform, in this study, those relations were identified by the impact test of rotating gear-shaft and-gearbox. In addition, we inserted the rubber between housing and bed, and analyze the effect of the rubber insertion on noise reduction by Operational Deflection Shapes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.258-261
• /
• 2007

The objective of this paper is to examine the ways in which to implement MEPS method for setting the design and operational limits in order to provide the guaranteed performance of the aircraft engine. Direct adder arithmetically added and related with the effects of ambient humidity, engine quality, throttle set tolerance and deterioration, etc is described with the random adder added in root square sum. The method was applied on the preliminary design of 4,000Ib class turbofan engine and the MEPS for engine component design and operational margin was generated.

• Structural Monitoring and Maintenance
• /
• v.6 no.1
• /
• pp.33-46
• /
• 2019

In present study, Operational Modal Analysis (OMA) was employed to carry out the dynamic and vibration analysis of the threshing unit of the combine harvester thresher as a mechanical component. The main study is to find the causes of vibration and to decrease it to enhance the lifetime and efficiency of the threshing unit. By utilizing OMA, structural modal parameters such as mode shapes, natural frequencies, and damping ratio was calculated. The combine harvester was excited by engine to vibrate different parts and accelerometer sensor collected acceleration signals at different speeds, and OMA was utilized by nonparametric and frequency analysis methods to obtain modal parameters while vibrating in real working conditions. Afterwards, finite element model was designed from the thresher and updated using the data obtained from the modal analysis. Using the conducted analyses, it was specified that proximity of the thresher pass frequency to one of the natural frequencies (16.64 Hz) was the most important effect of vibration in the thresher. Modification process of the structure was carried out by increasing mass required for changing the natural frequency location of the first mode to 12.4 Hz in order to reduce resonance and vibration of the thresher.