• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.23-26
• /
• 2006

For mechanical and electrical stability and environment protection. Cu and stainless steel stabilizers are laminated to a Ag layer to produce a composite neutral-axis(N-A) architecture in which the YBCO layer is centered between the oxide buffered metallic substrate and stabilizer strip lamination. This architecture allows the wire to meet operational requirements including stresses at cryogenic temperature. winding tensions as well as mechanical bending requirements including thermal and electrical stability under fault current conditions. We have experimentally studied mechanical properties of the laminated stainless steel and Cu stabilizers on YBCO coated conductors. We have laminated YBCO coated conductors by continuous dipping soldering process. We have investigated lamination interface between solder and stabilizer of the YBCO coated conductor. We evaluated bonding properties. tensile / shear bonding strength. and peeling strength laminated YBCO coated conductors.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.9-12
• /
• 2007

In this study. we searched for the mechanical and electrical properties of laminated coated conductors with stabilizer tape. Stabilizer tape plays a role for mechanical and electrical stability and environmental protection. Cu material stabilizer was laminated to Ag capping layer on SmBCO conductor layer. This architecture allows the wire to meet operational requirements including the stressless at cryogenic temperature and winding tension as well as mechanical bending requirements including thermal and electrical stability under fault current conditions. First, we have experimentally studied mechanical bonding properties of the laminated Cu stabilizers on SmBCO coated conductors. We have laminated SmBCO coated conductors by continuous dipping soldering process, Second, we have investigated electrical properties of the SmBCO coated conductors with stabilizer lamination. We evaluated bonding properties, peeling strength and critical current for laminated SmBCO coated conductors with Cu stabilizers.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제8권2호
• /
• pp.195-200
• /
• 2004

Trypsin can be immobilized on silk fibroin fiber (SFF) by introducing several spacer arms, such as ethylene diamine (ED), bovine serum albumin (BSA) and silk sericin (SS). Direct immobilization on silk fiber (SFFGA) has low activity because of the steric hindrance between the trypsin and substrate. The introduction of spacer arms onto SFF-GA can enhance the activity of trypsin by reducing the steric hindrance. When ED is used as a spacer arm, the activity of trypsin has increased but its stability decreased due to the increased hydrophobicity of SFF. BSA and SS, as a spacer arm, have better results in both activity and stability. SFF-BSA shows some decrease in the specific activity due to improper immobilizatin. SFF-SS maintained 90% of its initial activity even after 12 hrs incubation at $50^{\circ}C$. In the case of repeated hydrolysis of silk sericin with immobilized trypsin, SFF-GA and SFF-ED lost 50% of their initial activity right after first run, whereas SFF-BSA and SFF-SS maintained 80% of their initial activities even after 5 runs. Higher operational stability is due to increased hydrophilicity of SFF by introducing hydrophilic spacer arms such as BSA and SS. The high content of serine in SS increases the hydrophilicity of SFF resulting the best results among other spacer arms.

• Journal of Microbiology and Biotechnology
• /
• 제22권11호
• /
• pp.1486-1493
• /
• 2012

In this study, we investigated whether galactooligosaccharide (GOS) can be stably and steadily synthesized using immobilized ${\beta}$-galactosidase (${\beta}$-gal) inclusion body (IB)-containing E. coli cells during long-term repeated-batch operation. To improve the operational stability of this enzyme reactor system, immobilized E. coli cells were crosslinked with glutaraldehyde (GA) after immobilization of the E. coli. When we treated with 2% GA for E. coli crosslinking, GOS production continued to an elapsed time of 576 h, in which seven batch runs were operated consecutively. GOS production ranged from 51.6 to 78.5 g/l ($71.2{\pm}10.5$ g/l, n = 7) during those batch operations. In contrast, when we crosslinked E. coli with 4% GA, GOS production ranged from 31.5 to 64.0 g/l ($52.3{\pm}10.8$, n = 4), and only four consecutive batch runs were operated. Although we did not use an industrial ${\beta}$-gal for GOS production, in which a thermophile is used routinely, this represents the longest operation time for GOS production using E. coli ${\beta}$-gal. Improved stability and durability of the cell immobilization system were achieved using the crosslinking protocol. This strategy could be directly applied to other microbial enzyme reactor systems using cell immobilization to extend the operation time and/or improve the reactor system stability.

• Structural Engineering and Mechanics
• /
• 제90권1호
• /
• pp.19-26
• /
• 2024

In recent years, an increasing number of experimental studies have shown that the practical application of mature active control systems requires consideration of robustness criteria in the design process, including the reduction of tracking errors, operational resistance to external disturbances, and measurement noise, as well as robustness and stability. Good uncertainty prediction is thus proposed to solve problems caused by poor parameter selection and to remove the effects of dynamic coupling between degrees of freedom (DOF) in nonlinear systems. To overcome the stability problem, this study develops an advanced adaptive predictive fuzzy controller, which not only solves the programming problem of determining system stability but also uses the law of linear matrix inequality (LMI) to modify the fuzzy problem. The following parameters are used to manipulate the fuzzy controller of the robotic system to improve its control performance. The simulations for system uncertainty in the controller design emphasized the use of acceleration feedback for practical reasons. The simulation results also show that the proposed H∞ controller has excellent performance and reliability, and the effectiveness of the LMI-based method is also recognized. Therefore, this dynamic control method is suitable for seismic protection of civil buildings. The objectives of this document are access to adequate, safe, and affordable housing and basic services, promotion of inclusive and sustainable urbanization, implementation of sustainable disaster-resilient construction, sustainable planning, and sustainable management of human settlements. Simulation results of linear and non-linear structures demonstrate the ability of this method to identify structures and their changes due to damage. Therefore, with the continuous development of artificial intelligence and fuzzy theory, it seems that this goal will be achieved in the near future.

• 한국건축시공학회지
• /
• 제9권5호
• /
• pp.95-101
• /
• 2009

최근 건축물의 고층화에 따라 양중 계획의 중요성이 증대되고 있다. 타워크레인은 중요한 양중 장비로서의 역할을 수행하고 있으나, 구조적 안전사고 발생 시 그 피해가 매우 크므로 철저한 안정성검토가 선행되어야 한다. 타워크레인은 구조적 안정성을 확보하기 위해 횡지지 보강과 독립기초 및 파일기초 설계 등 안정성확보에 대한 고려가 매우 중요하며, 그 중 현장의 특수한 상황으로 인해 지내력 확보가 곤란하거나 더 이상 기초 사이즈를 증가시킬 수 없을 때 파일기초를 사용한다. 파일기초를 사용할 경우 독립기초 사용 시 보다 더 많은 안정성 검토 항목을 고려 해야하므로 체계적이고 철저한 검토가 필요하다. 본 연구는 파일기초 설계 시 파일기초의 기본적인 안정성 확보 뿐 만 아니라 최소의 비용 발생을 위한 최적설계 알고리즘 개발이 목적이며, 파일기초를 사용하는 고정식 트롤리타입의 타워크레인으로 연구 범위를 제한하여 진행한다. 타워크레인 파일 기초의 안정성 검토 항목과 절차, 최적설계에 관한 연구 결과물을 토대로 관련 업무 담당자의 업무 효율성을 향상 시킬 수 있을 뿐 아니라 파일 기초 설계에 투입되는 시간 및 비용의 절감효과를 기대 할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1364-1366
• /
• 2002

The Photovoltaic(PV) generation system is a promising source of energy for the future. Since the need for renewable energy has been increased, the research of PV generation system has also been progressed. Recently, cost down of PV generation system has been accomplished and practical technologies of the solar energy developed, Moreover, grid connected PV generation system are becoming actual and general. Operational technology of the grid connected PV generation system is being a hot issue. Power output of PV system is directly affected by wether conditions. When AC power supply is needed, power conversion by an inverter and a MPPT control are necessary. In this paper, for stability improvement of PV generation system. Active filter(AF) function is added to PV generation system, and simulations of PV-AF system under various weather conditions are performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.191-194
• /
• 1997

Passive, semi-active and active dampers have been used to dissipate energy in mechanical systems. Semi-active dampers have higher performance than passive dampers and require lower power to operate than active dampers. Its damping characteristics can be changed appropriately for varying conditions. In this paper, we developed a semi-active damper based on Magnetorheological(MR) fluid. MR fluid has a variable damping characteristics proportional for the magnetic field intensity. It has several advantages such as high strength, low viscosity, robustness in impurities and wide temperature range of operational stability. We designed a constrained rotary MR damper base on valve mode which can dissipate more energy per unit volume. The system with Bingham characteristics is obtained and proved by the experiment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.545-548
• /
• 2004

The paper describes the design of high-speed, high-resolution Sample-and-Hold circuit which shows the conversion rate 80MHz and the power supply of 3.3v with 0.35um CMOS 2-poly 4-metal process for high-speed, high resolution Analog-to-Digital Converter. For improving Dynamic performance of Sample-and-Hold, Two Double bootstrap switch and high performance operational amplifier with gain booster, which are used. and For physical stability of Sample and Hold circuit, reduces excess voltage of gate in bootstrap switch. Simulation results using HSPICE shows the SFDR of 71dB, 75dB in conversion rate of 80MHz result for two inputs(0.5Vpp, 10MHz and 1Vpp, 10MHz) and the power dissipation of 48mW at single 3.3V supply voltage.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.11-17
• /
• 1996

Many researches on natural gas engines, with lean mixtures are being conducted for the purpose of preservation of global environment. Lean combustion is one of the most promising method for increasing engine efficiency and reducing the emission from SI engines. Due to the possibility of partial burn and misfire, however, under lean burn operation, stable flame kernel formation and fast burn rate, by use of swirl or tumble flow, are needed to guarantee a successful subsequent combustion. Experimental data were obtained on a 4-stroke, natural gas fueled SI engine to investigate the effect of compression ratio, swirl and spark plug electrode rotation on efficiency and emission under lean burn condition. Experimental results have displayed that higher compression ratio, presence of swirl vane and favorable direction of electrode gap brougth about the improvements in engine efficiency and its operational stability.