• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.435-440
• /
• 2011

This paper propose the method of constructing the highly efficiency adder and multiplier systems over finite fields. The addition arithmetic operation over finite field is simple comparatively because that addition arithmetic operation is analyzed by each digit modP summation independently. But in case of multiplication arithmetic operation, we generate maximum k=2m-2 degree of ${\alpha}^k$ terms, therefore we decrease k into m-1 degree using irreducible primitive polynomial. We propose two method of control signal generation for the purpose of performing above decrease process. One method is the combinational logic expression and the other method is universal signal generation. The proposed method of constructing the highly adder/multiplier systems is as following. First of all, we obtain algorithms for addition and multiplication arithmetic operation based on the mathematical properties over finite fields, next we construct basic cell of A-cell and M-cell using T-gate and modP cyclic gate. Finally we construct adder module and multiplier module over finite fields after synthesizing ${\alpha}^k$ generation module and control signal CSt generation module with A-cell and M-cell. Next, we constructing the arithmetic operation unit over finite fields. Then, we propose the future research and prospects.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.119-120
• /
• 2020

In order to establish an evaluation method that can quantitatively evaluate the fire safety of existing buildings in Korea, a stochastic approach is needed to consider the extent of damage in the event of actual fire, along with the operation and installation of facilities. Accordingly, as a basic study for the establishment of fire safety assessment methods for buildings, this study aims to analyze the results of safety inspection and the degree of damage caused by the operation of fire doors and fire shutters in order to derive the reliability of fire doors and fire shutters. As a result, the results of inspection of fire shutters and fire doors and the results of operation using fire statisticians are as follows. As a result of the inspection, the positive rate of fire doors was about 82% and 98% of normal operation was derived from the fire investigation.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.85-101
• /
• 2015

Objective: The purpose of this study was to develop and evaluate smart secondary controls using iPad for the drivers with physical disabilities in the driving simulator. Background: The physically disabled drivers face problems in the operation of secondary control devices that accept a control input from a driver for the purpose of operating the subsystems of a motor vehicle. Many of conventional secondary controls consist of small knobs or switches that physically disabled drivers have difficulties in grasping, pulling or twisting. Therefore, their use while driving might increase distraction and workload because of longer operation time. Method: We examined the operation time of conventional and smart secondary controls, such as hazard warning, turn signal, window, windshield wiper, headlights, automatic transmission and horn. The hardware of smart secondary control system was composed of iPad, wireless router, digital input/output module and relay switch. We used the STISim Drive3 software for driving test, customized Labview and Xcode programs for interface control of smart secondary system. Nine subjects were involved in the study for measuring operation time of secondary controls. Results: When the driver was in the stationary condition, the average operation time of smart secondary devices decreased 32.5% in the normal subjects (p <0.01), 47.4% in the subjects with left hemiplegic disabilities (p <0.01) and 38.8% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. When the driver was driving for the test in the simulator, the average operation time of smart secondary devices decreased 36.1% in the normal subjects (p <0.01), 41.7% in the subjects with left hemiplegic disabilities (p <0.01) and 34.1% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. Conclusion: The smart secondary devices using iPad for people with hemiplegic disabilities showed significant reduction of operation time compared with conventional secondary controls. Application: This study can be used to design secondary controls for adaptive vehicles and to improve the quality of life of the people with disabilities.

• Imaging Science in Dentistry
• /
• v.32 no.4
• /
• pp.201-206
• /
• 2002

Purpose : To evaluate the radiographic change of operation sites after orthognathic surgery using the digital image processing and fractal analysis. Materials and Methods : A series of panoramic radiographs of thirty-five randomly selected patients who had undergone mandibular orthognathic surgery (bilateral sagittal split ramus osteotomy) without clinical complication for osseous healing, were taken. The panoramic radiographs of each selected patient were taken at pre-operation (stage 0), 1 or 2 days after operation (stage 1), 1 month after operation (stage 2), 6 months after operation (stage 3), and 12 months after operation (stage 4). The radiographs were digitized at 600 dpi, 8 bit, and 256 gray levels. The region of interest, centered on the bony gap area of the operation site, was selected and the fractal dimension was calculated by using the tile-counting method. The mean values and standard deviations of fractal dimension for each stage were calculated and the differences among stage 0, 1, 2, 3, and 4 were evaluated through repeated measures of the ANOVA and paired t-test. Results : The mean values and standard deviations of the fractal dimensions obtained from stage 0, 1, 2, 3, and 4 were 1.658±0.048, 1.580±0.050, 1.607±0.046, 1.624±0.049, and 1.641 ±0.061, respectively. The fractal dimensions from stage 1 to stage 4 were shown to have a tendency to increase (p < 0.05). Conclusion: The tendency of the fractal dimesion to increase relative to healing time may be a useful means of evaluating post-operative bony healing of the osteotomy site.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.89-100
• /
• 2011

The MAGLEV (Magnetically Levitated Vehicle) system, which is under commercialization as a new transportation system in Korea, is operated by means of unmanned automatic control system. Therefore the plan of train operation should be carefully established and validated in advance. In general, when making the train operation plan, the statistically predicted traffic data is used. However, traffic wave can occur when real train service is operated, and the demand-driven simulation technology is required to review train operation plans and service qualities considering traffic wave. This paper presents a method and model to simulate the MAGLEV's operation considering continuous demand changes. For this purpose, we employed the discrete event model which is suitable for modeling the behavior of railway passenger transportation, and modeled the system hierarchically using DEVS (Discrete Event System Specification) formalism. In addition, through the implementation and experiment using DEVSim++ simulation environment, we tested the feasibility of the proposed model and it is also verified that our demand-driven simulation technology could be used for the prior review of the train operation plans and strategies.

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.287-300
• /
• 2020

The present study applied the IPA(Importance-Performance Analysis) to derive several practical alternatives for the improvement of Chuncheon Silver Orchestra program using IPA(importance-performance analysis). Most importantly, this work performed a comparative study using sample data collected from two groups of silver member(N=53) and program operator(N=32). A careful literature review leaded to the development of six types of evaluation sectors, including 'connection with the local community', 'budget operation', 'program operation', 'manpower operation', 'public relations strategy' as well as 'environment for program operation'. This work further devised twenty-two evaluation items. The results indicated that silver member group rated 'manpower operation' the highest in their both perceived importance and performance. Program operator group rated 'budget operation' and 'manpower operation' rated the highest in their perceived importance and performance, respectively. The results form IPA matrix analysis provides an important implication that much efforts and interests should be sustainably given from the perspective of the silver member group and the program operator group coupled with four types of IPA quadrant, accordingly.

• East Asian mathematical journal
• /
• v.40 no.2
• /
• pp.183-207
• /
• 2024

This study is a case study that considered fractional senses and fraction operation abilities for 107 gifted students in elementary school classes. In order to find out the fractional sense, in the first question comparing the sizes of fractions 2/3 and 4/5, the students showed a variety of strategies, but the utilization rate of strategies excluding reduction to a common denominator did not exceed 50%. The second question can be solved by using the first question. It is a problem of finding two fractions by selecting four from six numbers 1, 3, 4, 5, 6, and 7 to create two fractions of which sum does not exceed 1. The percentage of correct answers to this question was about 27% (29 out of 107). Only 5 out of 29 students found answers using the first question, and the rest of the students sought answers through trial and error in various calculations. It shows that the item arrangement method from a deductive perspective has no significant effect on elementary school students. The percentage of correct answers was about 27% in the questions to find out the fraction operation ability-the question of drawing a 4/3 bar using a given 3/8-sized bar and 30.7% (23 out of 75) of the students who had wrong answers showed insufficient splitting operation. In addition, it has been shown that the operation of partitioning and iterating to form numerical senses and fractional concepts related to the fractions of the students has no significant impact.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.163-172
• /
• 2011

To provide the operation rule curve for suppling instream flow to urban stream from reservoir, the Soho reservoir with watershed area of 7.4 $km^2$ and total water storage of 2.58 $Mm^3$ was planned at the headwaters of the Daejeoncheon. Daily streamflow was simulated and using the simulated streamflow and desired instream flow, the operation rule curve by Senga method was drawn and evaluated through reservoir operation. Senga method is derived by accumulating the differences between streamflow and desired instream flow adversely. Water storages were simulated on a daily basis to supply urban instream flow from Soho reservoir, but the amount of supplying instream flow to urban stream was not nearly increased comparing with that of normal operation that does not used the rule curve. Thereafter the new simulation-based operation rule curve was derived and applied to supply instream flow from Soho reservoir. In normal operation, the amount of instream flow was shown to 15,000 $m^3$/d, but it was increased to 27,700 $m^3$/d in withdrawal limited operation using the new derived rule curve, in which the applicability of this rule curve was proved. Also comparing with the flow duration curves at station just before urban Daejeoncheon stream without and with upstream Soho reservoir, the 95th flow was decreased from 1.64 mm/d to 1.51 mm/d, and the 355th flow was increased from 0.17 mm/d to 0.30 mm/d. Monthly streamflows during October to March were increased from 10.6~24.1 mm to 24.1~34.0 mm with the increasing rate of 141~227%.

• Industrial Engineering and Management Systems
• /
• v.10 no.3
• /
• pp.209-220
• /
• 2011

Self-tapping screws have some operational peculiarities. In spite of their economical advantage that requires no prior tapping operation, a weakness of self-tapping screw-tightening operations is that screws can easily be tightened at a non-right angle, thus resulting in an improper tightening strength. Increases in outsourced workers have reduced labor costs, but the accompanying high worker fluidity means that new workers are more frequently introduced into factories. It is necessary to train new workers for self-tapping screw-tightening operations, which occupies a considerable portion of ordinary assembly works. The purpose of this study is to develop and implement a skill transfer system for the operation. This study (1) proposes a set of characteristic values for evaluating the quality of the operation and develops a device that can measure these values; (2) proposes criteria for evaluating the resultant quality of the tightening; and (3) develops a skill training system for better work performance. Firstly, sets of characteristic values for evaluating the quality of the operation, namely, torque, vertical pressure forces and horizontal vibration forces, are proposed. A device that can measure these values is developed. Secondly, criteria for evaluating the resultant quality of the tightening are identified, involving tightening torque, maximum vertical pressure and timing, vibration area during the processing and tightening period, and work angle. By using such parameters, workers with the proper aptitude can be identified. Thirdly, a skill training system for the operation is developed. It consists of screwdriver operation training and screw-tightening training with feedback information about the results of the operation. Finally, the validity of the training system is experimentally verified using new operators and actual workers.

• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.128-137
• /
• 2018

Purpose: This study was designed to elucidate the energy-utilization patterns for five methods of robo production. Methods: Robo (fried melon cake) was produced using five different methods, and the energy used for each unit operation was calculated using standard equations. The sensory attributes of the products were determined by panelists. Data were analyzed using descriptive analysis and analysis of variance at p < 0.05. Results: The energy demands for processing 2.84 kg of melon seed into robo (fried melon cake) using processes 1 (traditional method), 2, 3, 4, and 5 (improved methods) were 50,599.5, 21,793.6, 20,379.7, 21,842.9, and 20,429.3 kJ, respectively. These are equivalent to energy intensities of 1,7816.7, 7,673.8, 7,175.9, 7,691.2, and 7,193.4 kJ/kg, respectively. For the traditional process, the frying operation consumed the highest energy (21,412.0 kJ), and the mixing operation consumed the lowest energy (675.0 kJ). For the semi-mechanized processes, the molding operation consumed the highest energy (6,120.0 kJ), and the dry milling consumed the lowest energy (14.4 kJ). Conclusions: The energy-consumption patterns were functions of the type of unit operation, the technology involved in the operations, and the size of the equipment used in the whole processing operation. Robo produced via the milling of dried melon seed before oil expression was rated highest with regard to the aroma and taste quality, as well as the overall acceptability of the sensory evaluation, and required the lowest energy consumption. Full mechanization of the process line has potential for further reduction of the energy demand.