• 제목/요약/키워드: Operation factors

검색결과 3,653건 처리시간 0.035초

간문부 담도암에서 수술 후 방사선 치료의 결과 (The Results of Postoperative Radiation Therapy for Perihilar Cholangiocarcinoma)

  • 이유선;박재원;박진홍;최은경;안승도;이상욱;송시열;이승규;황신;이영주;박광민;김기훈;안철수;문덕복;장흥문;류민희;김태원;이재련;김종훈
    • Radiation Oncology Journal
    • /
    • 제27권4호
    • /
    • pp.181-188
    • /
    • 2009
  • 목 적: 수술 후 방사선치료를 시행한 간문부 담도암 환자를 대상으로 생존율, 재발양상, 예후 인자, 치료 부작용을 분석하여 방사선 치료의 결과를 알아보고자 하였다. 대상 및 방법: 98년 1월부터 2008년 3월까지 서울아산병원에서 근치적 또는 고식적 절제술 후 방사선 치료를 시행 받은 총 39명의 환자 중 총 방사선 조사량이 30 Gy 이상이었던 38명의 환자를 대상으로 후향적으로 분석하였다. 대상 환자들의 연령은 28~72세(중앙 연령, 59세)였으며, 남자가 23명 여자가 15명이었다. Eastern Cooperative Oncology Group (ECOG) 활동도는 모두 2 이하였다. AJCC에 따른 병리적 병기 1기, 2기는 각각 15명(40%), 23명 (60%)이었다. 수술은 완전 절제가 시행된 경우는 9명(24%), 절제연 양성인 경우는 29명(76%)이었다. 동시 항암화학요법은 30명(79%)에서 시행되었다. 방사선치료는 원발 종양이 있던 부위와 주변 림프절에 조사하였으며, 1회 선량은 1.8 Gy 또는 2 Gy로, 총 방사선량은 35~61 Gy (중앙값, 59.4 Gy)였다. 대상 환자들의 추적 관찰 기간은 6~45개월(중앙값, 14개월)이었다. 대상 환자의 생존율 분석은 Kaplan-Meier 법, 예후 인자 분석은 log-rank 법을 사용하였다. 결 과: 전체 환자의 3년 생존율은 30%, 3년 무진행 생존율은 8%이었으며, 중앙생존기간은 28개월이었다. 생존율에 유의하게 영향을 준 예후 인자는 종양의 분화도(p=0.003)였고, 무진행 생존율에 유의하게 영향을 준 예후 인자는 혈관-림프 침범(p=0.0307), 종양의 분화도(p=0.0245), 수술 후 CA 19-9 (p=0.0172)이었다. 완전 절제가 시행된 환자 9명의 3년 생존율은 34%로서 불완전 절제가 시행된 환자 29명의 20%보다 높았으나 유의한 차이는 보이지 않았다(p=0.3067). 최초 재발 양상은 국소 재발 18명(47%), 원격전이는 16명(42%)이었다. 치료에 연관된 EORTC Grade 3 이상의 급성 부작용은 관찰되지 않았으며, 만성 부작용으로는 십이지장 궤양에 의한 출혈이 2명(5.1%)에서 발생하였다. 결 론: 본 연구에서는 완전 절제가 시행된 경우와 절제연 양성인 경우에서의 생존율이 유의한 차이를 보이지 않아 방사선 치료의 국소재발 억제 효과가 있었을 가능성을 시사하였으나, 환자수가 적고 수술 단독군과의 비교가 이루어지지 않아 결론을 내리기는 어려웠다. 게다가 완전 절제 수술 후 방사선 치료를 시행한 군에서도 높은 국소 재발률을 보여, 향후 항암제와의 병용치료 및 정밀 방사선 치료 등을 통한 국소 제어율을 높이기 위한 연구가 필요하다.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

성문상부 상피세포암에서의 근치적 방사선치료의 역할 (The Role of Primary Radiotherapy for Squamous Cell Carcinoma of the Suprag1ottic Larynx)

  • 김원택;김동원;권병현;남지호;허원주
    • Radiation Oncology Journal
    • /
    • 제18권4호
    • /
    • pp.233-243
    • /
    • 2000
  • 목적 :본 연구에서는 부산대학교병원 치료방사선과에서 성문상부 편평상피세포암으로 진단받고 근치적 방사선치료를 받은 환자들을 대상으로 방사선치료 성적과 여기에 영향을 미칠 수 있는 여러 인자들을 비교 분석하여 성문상부암에서의 방사선치료의 효율성과 역할, 그리고 앞으로의 치료방침의 결정에 있어서 고려해야 할 부분들을 알아보려 하였다. 대상 및 방법 : 1985년 8월부터 1996년 12월까지 성문상부암으로 진단되어 근치적 방사선치료를 받은 환자 32예를 후향적 분석을 통해 최소 29개월간 추적관찰 하였다. 6MV 광자선을 이용하여 조사영역 축소치료법과 통상적 분할조사 방법으로 원발부위와 주위 경부림프절을 평균 70.2 Gy로 치료하였고, 이중 13예는 cisplatin과 5-FU로 유도 항암화학요법을 시행받았다 병기별로는 1기가 5명(15.6$\%$), 2기가 10명(31.3$\%$), 3기가 8명(25$\%$), 4기가 9명(28.1$\%$)이었다. 결과 : 연구 결과 5년 전체 생존율과 국소제어율, 성문보존율은 각각 51.7$\%$, 65.2$\%$, 65.6$\%$였고, 병기별로의 생존율은, 1기, 2기, 3기, 4기 각각 80$\%$, 66.7$\%$, 42.9$\%$, 25.0$\%$였고, 국소제어율은 각각 100$\%$,60.0$\%$, 62.5%$\%$ 44.4$\%$였으며, 성문보존율은 각각 100$\%$, 70$\%$, 62.5$\%$, 44.4$\%$였다. 유도 화학요법을 실시한 군과 방사선 단독 군에서 생존율, 국소제어율 등에서 유의한 차이를 보이지 못했다. 치료실패를 보인 환자 중 7예에서 구제적 수술을 시행했고 이 중 3예에서 성공하였다. 치료 중 화학요법을 병용한 1예에서 중성구감소증으로 입원하였으며, 그 외에는 grade 3 이상의 급성 독성은 관찰되지 않았고, 치료 후 2예에서 심한 후두부종으로 기관절개술을 받았다. 원격전이는 4예에서 보였고(폐 3예, 뇌 1예), 2예에서 이차성 원발암이 발견되었다. T병기와 N병기, 총방사선량, 그리고 종양의 육안적 소견 등이 유의한 예 후인자였다. 결론 . 다른 연구들의 결과와 비교해 보았을 때, 조기 성문상부암인 경우 방사선치료와 보존적 수술이 생존율과 국소제어율에 비슷한 결과를 보이므로 후두기능 보존의 효과가 좋은 방사선치료 단독으로도그 역할을 충분히 할 수 있다 하겠으며, 진행된 병기의 경우에서는 방사선 단독 치료가 수술과의 병합 치료보다 예후가 월등히 좋지 않게 나타나므로 가급적 수술과 방사선치료 병합요법을 시도하는 것이 좋겠으나, 방사선치료를 해야만 하는 경우에서는 성문보존율과 국소제어율을 향상 시킬 수 있는 화학요법과의 병용치료, 특히 동시 화학방사선치료와 다분할 방사선치료, 그리고 방사선 민감제 등을 이용한보다 더 폭 넓은 연구와 치료계획의 수립이 필요하다고 하겠다.

  • PDF

구인구직사이트의 구인정보 기반 지능형 직무분류체계의 구축 (Development of Intelligent Job Classification System based on Job Posting on Job Sites)

  • 이정승
    • 지능정보연구
    • /
    • 제25권4호
    • /
    • pp.123-139
    • /
    • 2019
  • 주요 구인구직사이트의 직무분류체계가 사이트마다 상이하고 SW분야에서 제안한 'SQF(Sectoral Qualifications Framework)'의 직무분류체계와도 달라 SW산업에서 SW기업, SW구직자, 구인구직사이트가 모두 납득할 수 있는 새로운 직무분류체계가 필요하다. 본 연구의 목적은 주요 구인구직사이트의 구인정보와 'NCS(National Competaency Standars)'에 기반을 둔 SQF를 분석하여 시장 수요를 반영한 표준 직무분류체계를 구축하는 것이다. 이를 위해 주요 구인구직사이트의 직종 간 연관분석과 SQF와 직종 간 연관분석을 실시하여 직종 간 연관규칙을 도출하고자 한다. 이 연관규칙을 이용하여 주요 구인구직사이트의 직무분류체계를 맵핑하고 SQF와 직무 분류체계를 맵핑함으로써 데이터 기반의 지능형 직무분류체계를 제안하였다. 연구 결과 국내 주요 구인구직사이트인 '워크넷,' '잡코리아,' '사람인'에서 3만여 건의 구인정보를 open API를 이용하여 XML 형태로 수집하여 데이터베이스에 저장했다. 이 중 복수의 구인구직사이트에 동시 게시된 구인정보 900여 건을 필터링한 후 빈발 패턴 마이닝(frequent pattern mining)인 Apriori 알고리즘을 적용하여 800여 개의 연관규칙을 도출하였다. 800여 개의 연관규칙을 바탕으로 워크넷, 잡코리아, 사람인의 직무분류체계와 SQF의 직무분류체계를 맵핑하여 1~4차로 분류하되 분류의 단계가 유연한 표준 직무분류체계를 새롭게 구축했다. 본 연구는 일부 전문가의 직관이 아닌 직종 간 연관분석을 통해 데이터를 기반으로 직종 간 맵핑을 시도함으로써 시장 수요를 반영하는 새로운 직무분류체계를 제안했다는데 의의가 있다. 다만 본 연구는 데이터 수집 시점이 일시적이기 때문에 시간의 흐름에 따라 변화하는 시장의 수요를 충분히 반영하지 못하는 한계가 있다. 계절적 요인과 주요 공채 시기 등 시간에 따라 시장의 요구하는 변해갈 것이기에 더욱 정확한 매칭을 얻기 위해서는 지속적인 데이터 모니터링과 반복적인 실험이 필요하다. 본 연구 결과는 향후 SW산업 분야에서 SQF의 개선방향을 제시하는데 활용될 수 있고, SW산업 분야에서 성공을 경험삼아 타 산업으로 확장 이전될 수 있을 것으로 기대한다.

심한 좌심실 부전을 갖는 환자에서 시행한 Off-Pump CABG와 On-Pump CABG의 중단기 성적비교 (The Comparison Study of Early and Midterm Clinical Outcome of Off-Pump versus On-Pump Coronary Artery Bypass Grafting in Patients with Severe Left Ventricular Dysfunction (LVEF${\le}35{\%}$))

  • 윤영남;이교준;배미경;심영희;유경종
    • Journal of Chest Surgery
    • /
    • 제39권3호
    • /
    • pp.184-193
    • /
    • 2006
  • 배경: 심장박동 상태에서 시행하는 관상동맥우회술(Off pump coronary artery bypass grafting, OPCAB) 은 심폐체외순환 하에서 시행하는 관상동맥우회술(On pump coronary artery bypass grafting, On pump CABG)에 비해 합병증이 다소 적은 것으로 보고되고 있다. 저자들은 좌심실 기능이 저하된 환자들에서 OPCAB과 On pump CABG의 단기 및 중기 성적을 평가하여 OPCAB의 유용성을 확인하였다. 대상 및 방법: 2001년 1월부터 2005년 2월까지 동반수술을 시행 받지 않고 관상동맥우회술만을 시행 받은 946명 중 좌심실 박출계수가 $35\%$ 이하인 100명을 대상으로 하였다(OPCAB군 : On pump CABG군 =68명: 32명). 평균 연령은 두 군이 OPCAB군과 On pump CABG군이 각각 62.9$\pm$9.0세와 63.8 $\pm$ 8.0로 두 군의 차이가 없었다. 두 군의 수술 전 위험요인을 분석하고, 수술 결과 및 추적결과를 평가 및 비교하였다. 결과: OPCAB군은 평균 2.75$\pm$0.72개, On pump CABG군은 2.78$\pm$0.55개의 도관을 획득하여, 각각 3.00$\pm$0.79개, 3.16$\pm$0.72개의 원위문합을 시행하였다. 수술 후 사망은 OPCAB군에서만 1명 ($1.5\%$) 발생하였으나 두 군간의 통계적 유의성은 없었다. 수술시간, 수술 후 1일째 CK-MB, 수술 후 기계 환기 시간, 중환자실 체류기간, 합병증 발생률이 통계적으로 유의하게 OPCAB군에서 더 낮았다. 평균 추적 기간은 26.6$\pm$12.8개월(4${\~}$54개월)이었으며, 추적 기간 중 좌심실 박출계수는 OPCAB군과 On pump CABG군이 각각 $27.1\pm4.5\%$$26.9\pm5.4\%$에서 $40.7\pm13.0\%$$33.3\pm13.7\%$로 통계적으로 유의하게 각각 증가하였다. 4년 생존율은 OPCAB군과 On pump CABG군이 각각 $92.2\%,\;88.3\%$, 심장관련 사망에 있어서 4년 freedom rate은 각각 $97.7\%,\;96.4\%$로 두 군간의 차이는 없었으며, 심장관련 합병증과 협심증 발생의 freedom rate도 두 군간의 차이는 없었다. 결론: 좌심실 기능이 저하된 환자들에서 심장박동 상태에서 시행하는 관상동맥우회술은 심장기능을 향상시키고 On pump CABG군에 비해 우수한 수술결과를 보였다. 특히 On pump CABG군에 비해 우수한 단기 성적을 보였으나 중기성적은 차이가 없었다. 따라서 좌심실 기능이 저하된 환자들에 있어서 심장박동 상태에서 시행하는 관상동맥우회술은 안전하고 효과적으로 사용될 수 있는 수술방법이라고 생각한다.

인공습지시스템에서 수리학적 조건과 수질정화특성 (Purification Characteristics and Hydraulic Conditions in an Artificial Wetland System)

  • 박병흔;김재옥;이광식;주기재;이상준;남귀숙
    • 생태와환경
    • /
    • 제35권4호통권100호
    • /
    • pp.285-294
    • /
    • 2002
  • 본 연구는 농업용저수지의 수질개선을 위한 인공습지 시스템에서 수리학적 부하조건과 수질정화 특성간의 상관관계를 평가하고, 습지의 조성과 관리에 관한 기본적이며 주요 인자들을 규명하고자하였다. 인공습지시스템은 저수지 중층수를 유입시키기 위한 양수장과 미나리, 창포, 줄, 부들, 갈대등의 정수식물을 식재한 6개의 개별습지로 구성되어 있다. 시스템은 자유수면흐름방식으로 유입처리유량 $0.012-0.122\;m^3/s$,수리학적 체류시간 0.5-2.0 hr의 수리학적 고부하조건으로 운영하였으며, 수심은 0.1-0.2m, 유입수질은 저수지를 대상으로 하여 비교적 낮은 영양염류 농도(TN 2.224-2.462 mg/L, TP 0.145-0.164 mg/L)를 가지고 있다. 본 연구기간 중 각 개별습지의 평균 수질정화효율은 TN 12.1-14.3%로 갈대조에서 높게 나타났으며, TP는 6.3-9.5%로 식물 종에 따른 른 차이가없었다. SS는 17.4-38.5%, Cht-a는 12.6-20.2%로 미나리조에서 높게 나타났는데, 이는 유입수 농도가 다소 높은 때문으로 판단된다. 시간당 정화량은 TN $1.299-2.343\;g{\cdot}m^{-2}{\cdot}d^{-1}$ TP $0.85-1821\;g{\cdot}m^{-2}{\cdot}d^{-1}$, SS는 $17.9-111.6\;g{\cdot}m^{-2}{\cdot}d^{-1}$. Chl-3는 $0.011-0.094\;g{\cdot}m^{-2}{\cdot}d^{-1}$로 정화효율에서와 달리 TN은 줄에서 가장 높았고, TP는 창포에서 높았다. 침강성 물질인 SS와 Chl-a는 미나리에서 높게 나타났으며, 미나리는 BOD, COD, TN, TP등 다른 수질항목에서도 높은 값을 보여주고 있어 정화효율에서와 같이 유입수농도가 습지내 물질제거에 영향이 있음을 보여준다. 정화효율 및 시간당 정화량과 수리학적 조건간의 상관관계는 수심, 체류시간, 일유입량, 수리학적 부하량, 유입수 농도, 온도 등 다양한 변수에 의한 영향으로 비교적 낮게 나타났다. 정화효율과 수리학적조건간의 상관계수($R^2$)는 수리학적 체류시간과 0.016-0.731,일처리유량과는 0.015-0.868을 나타내었으며, 시간당 정화량과 수리학적 조건간의 상관계수($R^2$)는 수리학적 체류시간과는 0.173-0.763,일처리유량과는 0.209-0.770의 범위를 나타내었다. 정화효율과 수리학적 부하조건간의 상관계수($R^2$)Tt 0.5 이상을 나타내는 각 수생식물 습지별 수질항목은 체류시간과 일처리유량에 대해각각 20%,정화속도와 수리학적 조건간의 상관계수는 체류시간에 대해 53%, 일처리유량에 대해73%가 0.5이상을 보이고 있어 시간당 정화량과 수리학적 조건간의 상관관계가 정화효율과의 상관관계보다 좀더 유의성 있게 나타났다. 이것은 높은 수리학적 부하조건이 영양염류 등의 정화효율에는 크게 영향을 미치지 않음을 보여주고 있으며, 따라서 비교적 낮은 농도의 영양염류를 가지고 있고, 많은 처리수량을 요구하는 부영양화된 저수지의 수질개선을 위해서는 높은 수리학적 부하조건에서 시간당 정화량을 늘리는 관리방법이 경제적이며, 이에 초점을 맞추어 나가야 할 것으로 사료된다.

서울특별시 지정문화재 관리 현황 진단 및 개선방안 연구 - 정기조사(2016~2018) 결과를 중심으로 - (A Study on the Present Condition and Improvement of Cultural Heritage Management in Seoul - Based on the Results of Regular Surveys (2016~2018) -)

  • 조홍석;서현정;김예린;김동천
    • 헤리티지:역사와 과학
    • /
    • 제52권2호
    • /
    • pp.80-105
    • /
    • 2019
  • 재난 유형의 복합화 및 불규칙성이 날로 늘고 있는 가운데 다양한 자연적 인문적 요인에 의하여 문화재가 파괴되고 손상되는 사례가 빈번해짐에 따라 보다 적극적인 사전 예방적 차원에서의 문화재 보존 관리 필요성이 높아지고 있다. 이에 문화재청은 문화재의 체계적인 보존 관리를 위해 2005년 12월 정기조사를 법제화하였고, 최근에는 법령을 개정하여 조사 주기를 5년에서 3년으로 단축하는 한편, 정기조사 대상을 등록문화재까지 확대하는 등 제도적으로 문화재 보존 관리 역량을 강화하고자 노력하고 있다. 한편 시 도지정문화재의 정기조사는 조례에 따라 광역자치단체 중심으로 시행하도록 되어 있는데, 서울특별시의 경우 도심에 위치한 문화재가 많고 탐방 수요가 높아 상대적으로 예방적 차원의 관리가 더욱 중요함에 따라 2008년 조례를 개정해 정기조사의 법적 근거를 마련하고, 2016년에서 2018년까지 시지정문화재 전체를 대상으로 정기조사를 실시하였다. 이에 개별 문화재를 중심으로 진행된 조사의 결과를 취합하고 종합적인 관리 현황을 진단함으로써 보다 효과적인 관리방안을 마련하기 위한 검토가 필요한 시점이다. 따라서 본 연구는 서울특별시 지정문화재에 대하여 3개년(2016~2018) 동안 추진된 정기조사 결과를 중심으로 종합적인 관리 실태를 점검함으로써 성과 및 한계를 진단하고 개선방안을 모색하는 한편, 서울특별시가 추진 중인 통합 관리 시스템에 기초 DB 탑재를 위한 방안을 제언하였다. 구체적으로 정기조사 운영 지침상의 조사 서식을 준용하되 시지정문화재의 특성을 고려하여 조사 서식의 유형을 재분류하고 세분화하였다. 또한 조사 범위 및 방식에 있어 일관성 있고 구체적인 정보 기술을 위한 매뉴얼을 개발하였다. 이를 토대로 정기조사 결과를 분석한 바 조사 대상 문화재 총 521건 가운데 401건(77.0%)은 전반적으로 보존 관리 상태가 양호하였고, 102건(19.6%)은 주의관찰, 정밀진단, 수리 등 별도의 조치가 필요한 것으로 확인되었다. 이에 대한 조치로 관리 상태 및 시급성에 따라 중점 관리 대상을 선정하여 우선적으로 관리하는 방안을 제안하였다. 향후 본 연구를 기초로 보다 합리적이고 체계적인 문화재 보존 관리 계획의 수립 및 추진을 도모하는 한편, 중장기적으로 서울특별시가 추진하고 있는 통합 관리 시스템에 기초 DB를 효과적으로 제공함으로써 사전 예방적이고 효율적인 문화재 관리 체계의 구축을 통한 안전하고 지속가능한 문화재 보호의 토대가 마련될 수 있기를 기대한다.

병원 간호행정 개선을 위한 연구 (A Study for Improvement of Nursing Service Administration)

  • 박정호
    • 대한간호학회지
    • /
    • 제3권1호
    • /
    • pp.13-40
    • /
    • 1972
  • Much has teed changed in the field of hospital administration in the It wake of the rapid development of sciences, techniques ana systematic hospital management. However, we still have a long way to go in organization, in the quality of hospital employees and hospital equipment and facilities, and in financial support in order to achieve proper hospital management. The above factors greatly effect the ability of hospitals to fulfill their obligation in patient care and nursing services. The purpose of this study is to determine the optimal methods of standardization and quality nursing so as to improve present nursing services through investigations and analyses of various problems concerning nursing administration. This study has been undertaken during the six month period from October 1971 to March 1972. The 41 comprehensive hospitals have been selected iron amongst the 139 in the whole country. These have been categorized according-to the specific purposes of their establishment, such as 7 university hospitals, 18 national or public hospitals, 12 religious hospitals and 4 enterprise ones. The following conclusions have been acquired thus far from information obtained through interviews with nursing directors who are in charge of the nursing administration in each hospital, and further investigations concerning the purposes of establishment, the organization, personnel arrangements, working conditions, practices of service, and budgets of the nursing service department. 1. The nursing administration along with its activities in this country has been uncritical1y adopted from that of the developed countries. It is necessary for us to re-establish a new medical and nursing system which is adequate for our social environments through continuous study and research. 2. The survey shows that the 7 university hospitals were chiefly concerned with education, medical care and research; the 18 national or public hospitals with medical care, public health and charity work; the 2 religious hospitals with medical care, charity and missionary works; and the 4 enterprise hospitals with public health, medical care and charity works. In general, the main purposes of the hospitals were those of charity organizations in the pursuit of medical care, education and public benefits. 3. The survey shows that in general hospital facilities rate 64 per cent and medical care 60 per-cent against a 100 per cent optimum basis in accordance with the medical treatment law and approved criteria for training hospitals. In these respects, university hospitals have achieved the highest standards, followed by religious ones, enterprise ones, and national or public ones in that order. 4. The ages of nursing directors range from 30 to 50. The level of education achieved by most of the directors is that of graduation from a nursing technical high school and a three year nursing junior college; a very few have graduated from college or have taken graduate courses. 5. As for the career tenure of nurses in the hospitals: one-third of the nurses, or 38 per cent, have worked less than one year; those in the category of one year to two represent 24 pet cent. This means that a total of 62 per cent of the career nurses have been practicing their profession for less than two years. Career nurses with over 5 years experience number only 16 per cent: therefore the efficiency of nursing services has been rated very low. 6. As for the standard of education of the nurses: 62 per cent of them have taken a three year course of nursing in junior colleges, and 22 per cent in nursing technical high schools. College graduate nurses come up to only 15 per cent; and those with graduate course only 0.4 per cent. This indicates that most of the nurses are front nursing technical high schools and three year nursing junior colleges. Accordingly, it is advisable that nursing services be divided according to their functions, such as professional, technical nurses and nurse's aides. 7. The survey also shows that the purpose of nursing service administration in the hospitals has been regulated in writing in 74 per cent of the hospitals and not regulated in writing in 26 per cent of the hospitals. The general purposes of nursing are as follows: patient care, assistance in medical care and education. The main purpose of these nursing services is to establish proper operational and personnel management which focus on in-service education. 8. The nursing service departments belong to the medical departments in almost 60 per cent of the hospitals. Even though the nursing service department is formally separated, about 24 per cent of the hospitals regard it as a functional unit in the medical department. Only 5 per cent of the hospitals keep the department as a separate one. To the contrary, approximately 12 per cent of the hospitals have not established a nursing service department at all but surbodinate it to the other department. In this respect, it is required that a new hospital organization be made to acknowledge the independent function of the nursing department. In 76 per cent of the hospitals they have advisory committees under the nursing department, such as a dormitory self·regulating committee, an in-service education committee and a nursing procedure and policy committee. 9. Personnel arrangement and working conditions of nurses 1) The ratio of nurses to patients is as follows: In university hospitals, 1 to 2.9 for hospitalized patients and 1 to 4.0 for out-patients; in religious hospitals, 1 to 2.3 for hospitalized patients and 1 to 5.4 for out-patients. Grouped together this indicates that one nurse covers 2.2 hospitalized patients and 4.3 out-patients on a daily basis. The current medical treatment law stipulates that one nurse should care for 2.5 hospitalized patients or 30.0 out-patients. Therefore the statistics indicate that nursing services are being peformed with an insufficient number of nurses to cover out-patients. The current law concerns the minimum number of nurses and disregards the required number of nurses for operation rooms, recovery rooms, delivery rooms, new-born baby rooms, central supply rooms and emergency rooms. Accordingly, tile medical treatment law has been requested to be amended. 2) The ratio of doctors to nurses: In university hospitals, the ratio is 1 to 1.1; in national of public hospitals, 1 to 0.8; in religious hospitals 1 to 0.5; and in private hospitals 1 to 0.7. The average ratio is 1 to 0.8; generally the ideal ratio is 3 to 1. Since the number of doctors working in hospitals has been recently increasing, the nursing services have consequently teen overloaded, sacrificing the services to the patients. 3) The ratio of nurses to clerical staff is 1 to 0.4. However, the ideal ratio is 5 to 1, that is, 1 to 0.2. This means that clerical personnel far outnumber the nursing staff. 4) The ratio of nurses to nurse's-aides; The average 2.5 to 1 indicates that most of the nursing service are delegated to nurse's-aides owing to the shortage of registered nurses. This is the main cause of the deterioration in the quality of nursing services. It is a real problem in the guest for better nursing services that certain hospitals employ a disproportionate number of nurse's-aides in order to meet financial requirements. 5) As for the working conditions, most of hospitals employ a three-shift day with 8 hours of duty each. However, certain hospitals still use two shifts a day. 6) As for the working environment, most of the hospitals lack welfare and hygienic facilities. 7) The salary basis is the highest in the private university hospitals, with enterprise hospitals next and religious hospitals and national or public ones lowest. 8) Method of employment is made through paper screening, and further that the appointment of nurses is conditional upon the favorable opinion of the nursing directors. 9) The unemployment ratio for one year in 1971 averaged 29 per cent. The reasons for unemployment indicate that the highest is because of marriage up to 40 per cent, and next is because of overseas employment. This high unemployment ratio further causes the deterioration of efficiency in nursing services and supplementary activities. The hospital authorities concerned should take this matter into a jeep consideration in order to reduce unemployment. 10) The importance of in-service education is well recognized and established. 1% has been noted that on the-job nurses. training has been most active, with nursing directors taking charge of the orientation programs of newly employed nurses. However, it is most necessary that a comprehensive study be made of instructors, contents and methods of education with a separate section for in-service education. 10. Nursing services'activities 1) Division of services and job descriptions are urgently required. 81 per rent of the hospitals keep written regulations of services in accordance with nursing service manuals. 19 per cent of the hospitals do not keep written regulations. Most of hospitals delegate to the nursing directors or certain supervisors the power of stipulating service regulations. In 21 per cent of the total hospitals they have policy committees, standardization committees and advisory committees to proceed with the stipulation of regulations. 2) Approximately 81 per cent of the hospitals have service channels in which directors, supervisors, head nurses and staff nurses perform their appropriate services according to the service plans and make up the service reports. In approximately 19 per cent of the hospitals the staff perform their nursing services without utilizing the above channels. 3) In the performance of nursing services, a ward manual is considered the most important one to be utilized in about 32 percent of hospitals. 25 per cent of hospitals indicate they use a kardex; 17 per cent use ward-rounding, and others take advantage of work sheets or coordination with other departments through conferences. 4) In about 78 per cent of hospitals they have records which indicate the status of personnel, and in 22 per cent they have not. 5) It has been advised that morale among nurses may be increased, ensuring more efficient services, by their being able to exchange opinions and views with each other. 6) The satisfactory performance of nursing services rely on the following factors to the degree indicated: approximately 32 per cent to the systematic nursing activities and services; 27 per cent to the head nurses ability for nursing diagnosis; 22 per cent to an effective supervisory system; 16 per cent to the hospital facilities and proper supply, and 3 per cent to effective in·service education. This means that nurses, supervisors, head nurses and directors play the most important roles in the performance of nursing services. 11. About 87 per cent of the hospitals do not have separate budgets for their nursing departments, and only 13 per cent of the hospitals have separate budgets. It is recommended that the planning and execution of the nursing administration be delegated to the pertinent administrators in order to bring about improved proved performances and activities in nursing services.

  • PDF

전남 지방에 있어서의 양송이 재배에 최적한 환경조건 조절법 분석에 관한 연구 (Study on the Controlling Mechaniques of the Environmental Factors in the Mushroom Growing House in Chonnam Province)

  • 정병재;이은철
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권2호
    • /
    • pp.32-34
    • /
    • 1974
  • 본 논문은 1968년 과학기술처 Trust Fund에 의하여 실시된 연구로서 전남 지방에 있어서 최적합한 양송이 재배사를 구명하기 위하여 이미 구미에서 연구된 결과를 토대로 하여 우리나라의 기후적 조건과 경제적 조건을 고찰한 자연공기 순환법을 적용, 양송이 재배에 최적한 환경 조건과 이의 조절법을 구명코저 시상식재배사와 지하실에 구축한 태양열을 이용하는 태양열식 재배사를 본실험용으로 구축하고 전자에 대하여서는 외가의 온도의 영향을 받지 아니하는 측벽구조와 천정의 구조, 환기구의 위치 및 그 환기량등에 관하여 검토하였으며 후자에 관하여는 태양열 이용 효과에 대하여 검토하였다. 또한 동기에 있어서의 계속적 재배를 가능케 하기 위하여 양송이 재배사의 보온에 적합한 가열 장치에 대하여서도 검토하였다. 1. 실험용 지상식 양송이 재배사의 효과에 관하여는 이미 실험결과 및 그 분석에서 지적된 바 있거니와 그 측벽 및 천정의 구조는 재배사를 외계의 기상조건에서 격리하는데 충부한 효과가 있는 것으로 고려된다. 2. 반지하실에 구축한 실험용 태양식 양송이 재배사의 효과에 관하여는 실험결과 및 그 분석에 지적한 바와 같거니와 태양열을 이용하는데 있어 충분한 효과가 있는 것으로 고려된다. 그러나 이것을 농가에 적용하기 위하여는 다음과 같은 제점이 개선되어야 할 것으로 고려된다. 즉 (1) 태양식의 지붕과 천정은 실험용 지상식재배사의 그것과 동일히 하고, (2) 태양열 수열 장치는 적당히 제고되어야 할 것으로 고려된다. 3. 본 실험 연구에서 실시한 각조의 환기법중 GE-CV 및 VS-CV 환기법이 가장 효과적인 것으로 본다. 4. 측벽수치 및 지중 환기장치는 이미 지적한 바와 같이 농가용 양송이재배사의 자연환기법으로 실용적 가치가 충분하다. 그것은 이들 환기장치는 그 환기로를 통하여 사내에 유입되는 외기의 온도를 인공적으로 가열이나 또는 냉각하지 않고 사내 온도에 접근하지 않도록 조절하는 효과가 있기 때문이다. 지금 외온을 $X^{\circ}C$로 할때 각종 환기로에 의하여 흡수되는 온도 $Y^{\circ}C$를 X의 함수로 하는 실험식은 다음과 같이 회귀직선으로 표시된다. GP$\cdots$Y=0.9X-12.8 GE$\cdots$Y=0.96X-15.11 VS$\cdots$Y=0.94X-17.57 5. 재배사내에 유입되는 공기 및 사외로 배출되는 공기에 관한 실험식은 다음과 같이 회귀직선 및 지수곡선으로 표시된다. 5.1 배출속도 Ycm/sec.를 유입속도 Xcm/sec.의 함수로 하는 회귀직선식 GE-CV(50%)법$\cdots$Y=1.0X-1.65 GE-CV(100%)법$\cdots$Y=0.42X+2.03 VS-CV(100%)법$\cdots$Y=0.85X+0.96 5.2 배출량 $Ym^3$/hr.를 유출량${\times}m^3$/hr.의 함수로 하는 회귀직선식 GE-CV(50%)법$\cdots$Y=2.59X-10.88 GE-CV(100%)법$\cdots$Y=2.16X+26.53 5.3 상면 공기이동 속도 Ym/sec.를 배출공기 속도${\times}m$/sec.의 함수로 하는 회귀직선식 GE-CV(50%)법$\cdots$Y=0.5X+0.84 5.4 $CO_2$ 축적량 Y(%)를 상면공기이동속도 cm/sec.의 함수로 하는 회귀직선식 GE-CV(50%)$\cdots$Y=114.53-6.42X 5.5 $CO_2$ 축적량Y(%)를 배출공기량 $m^3$/hr.의 함수로 하는 지수곡선식 GE-CV(50%)$\cdots$Y=$127.18{\times}1.0093^{-x}$ 5.6 Natural ventilation system에 있어서 양송이 생육에 적합한 환경적조건을 마련하기 위한 환기구의 단면적은 재배사 전용적에 대하여 다음과 같은 비율로할 수 있다. GE(지중유입 환기구 단면적)$\cdots$0.3-0.5%(요조절) CV(천정배출 환기구 단면적)$\cdots$0.8-1.0% (요조절) 6. 본 연구에서 실험한 각종의 가열장치중 무압증기수 보이라도 사요할 수 있는 온수 보이라가 농가용 양송이재배사 가열장치로서, 그 효과면에 있어서나 또는 그 가격면에 있어서 최적합다하는 것이 확인되고 있다.

  • PDF