• Journal of National Security and Military Science
• /
• s.5
• /
• pp.1-45
• /
• 2007

Reserved forces of ROKA are in charge of replacement of TOE in the wartime and mission of rear area operation. But there is institutional inertia in the law and organization oriented to fill human resources rather than take mission. We need to prepare for the investment and arrangement of reserved forces as military power that would be replaced standing forces. In this portion, to reinforce reserve forces elite, First, efficient mobilization regulations and systems are suggested. I covered a maintenance of relevant mobilization ordinances which need to legislated and approved by national assembly for wartime and development of mobilization system which might lose the appropriate time for mobilization due to complicated declaration procedures and measures to overcome the panic at the initial stage of the war and organization and employment of nationwide transportation system and mobilization center. To ensure efficient resource management and mobilization of reserve forces with a number of approximately 3 million, there's a necessity of organization for integration and conciliation. To make it real, I suggested establishing and employing the mobilization center, on first phase, employ the mobilization center focusing on homeland divisions, on second phase, it is advisable to convert to national level mobilization system and develop to central mobilization center focusing on national emergency planning committee. During peacetime, in conjunction with Mobilization Cell, mobilization center can conduct resource survey and integrate and manage mobilization resources and take charge of mobilization training of subordinate units, and during wartime, in conjunction with mobilization coordination team and Cell, can ensure the execution of mobilization. Second, Future oriented reserve forces management system such as service system of reserve forces and support system of homeland defense operations. Current service and trainings of reserve forces by the year have very low connection, as it is very complex to manage the resources and trainings, and service and training lack the equity, re-establishment of service system is required. Also in an aspect of CSS and cultivation support for reserve forces, as the scope and limitation of responsibility between the armed forces and autonomous organization is obscure, conditions to conduct actual-fighting exercises are limited. Concentrated budgetting is extremely difficult because reserve forces training fields are scattered nationwide, and facilities and equipments are rapidly getting older. To improve all these, I suggest the organization of homeland defense battalion with a unit of "City-Gun-District" and supporting the local reserve forces. Conduct unit replacement or personal replacement for those who have finished their 1 or 2 years and homeland defense operation duty for those with 3-5 years for consistency and simplification. Third, I suggest Future oriented Reserved Training(FRT) and Training Center oriented training management to establish a reliable reserve training. Reserves carry out expansion of unit, conventional combat mission, homeland defense and logistics support during wartime, and actual-fighting exercise, and disaster relief, peace keeping activities. Despite diverse activities and roles, their training condition still stays definitely poor. For these reasons, Modernization of weapons and facilities through gradual replacement and procurement is essential to enhance mobilization support system.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1433-1435
• /
• 2003

Very decisive progress was made in advancing fundamental POL-IN-SAR theory and algorithm development during the past decade. This was accomplished with the aid of airborne & shuttle platforms supporting single -to-multi-band multi-modal POL-SAR and also some POL-IN-SAR sensor systems, which will be compared and assessed with the aim of establishing the hitherto not completed but required missions such as tomographic and holographic imaging. Because the operation of airborne test-beds is extremely expensive, aircraft platforms are not suited for routine monitoring missions which is better accomplished with the use drones or UAVs. Such unmanned aerial vehicles were developed for defense applications, however lacking the sophistic ation of implementing advanced forefront POL-IN-SAR technology. This shortcoming will be thoroughly scrutinized resulting in the finding that we do now need to develop most rapidly POL-IN-SAR drone-platform technology especially for environmental stress-change monitoring with a great variance of applications beginning with flood, bush/forest-fire to tectonic-stress (earth-quake to volcanic eruptions) for real-short-time hazard mitigation. However, for routine global monitoring purposes of the terrestrial covers neither airborne sensor implementation - aircraft and/or drones - are sufficient; and there -fore multi-modal and multi-band space-borne POL-IN-SAR space-shuttle and satellite sensor technology needs to be further advanced at a much more rapid phase. The existing ENVISAT with the forthcoming ALOSPALSAR, RADARSAT-2, and the TERRASAT will be compared, demonstrating that at this phase of development the fully polarimetric and polarimetric-interferometric modes of operation must be viewed and treated as preliminary algorithm verification support modes and at this phase of development are still not to be viewed as routine modes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.356-361
• /
• 2005

In this paper, a new scheme of current programmed control for three phase PWM AC-AC converter is presented. Compared to duty-ratio voltage control, current programmed control has several advantages such as reduction of system order and inherent current protection. By considering only the magnitude components, the same scheme in the DC-DC converter can be extended to the three phase PWM AC-AC converter. Sensing the output voltage and the inductor current, an error signal will be generated by comparing the output voltage magnitude with a reference value. Then the error signal will be processed by a PI compensator to generate the current command. The converter switches will the change the state by a periodic clock pulse or at the instants when the inductor current magnitude reaches the current command. As an example case, the buck converter is treated. The converter analysis is carried out by applying the complex DQ circuit transformation to obtain basic physical insight into the converter operation and to establish some important characteristic equations for control purpose. The simulation with Simplorer shows the validity of the proposed scheme and the experimental results support the verification of the design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.319-326
• /
• 2013

This paper describes the orbital dynamics operation results for the launch and early operations phase (LEOP) of KOMPSAT-3, which was successfully launched on May 18, 2012. At the initial phase, operational orbit determination was carried out using ground tracking data and GPS navigation solution. And, both in-plane and out-of plane maneuvers were executed in order to change the orbit from the injection orbit to the mission orbit. In addition, the accuracy of precise orbit determination was indirectly evaluated by overlapping method using GPS raw data of KOMPSAT-3 and international GNSS service data from worldwide-distributed ground stations. Currently, KOMPSAT-3 is operated in pre-defined mission orbit, and its various kinds of orbit data are generated and distributed to support the normal mission operations.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.1
• /
• pp.1-11
• /
• 2015

Feedwater Heaters are important components in a nuclear power plant. As the age of heater increases, the maintenance cost required for continuous operation also increases. Most heaters have the carbon steel shells, tube support plates and flow baffles. The carbon steel is susceptible to flow-accelerated corrosion. This is especially true if the flow has a two-phase mixture of steam and condensate. The wall thinning around the wet steam entrance area of the shell is inevitable during some long term operation. The structural integrity of the feedwater heater shell affects the safe operation of the nuclear power plant. Therefore, it is needed for the thinned shell to be repaired. The maintenance method for preventing failure of the shell should be determined by investigating various factors including the stress distribution of thinned area. The stress analysis of the shell including the steam entrance region is studied in this paper. The results of thinned shell is compared with that of intact shell.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.3
• /
• pp.256-262
• /
• 2017

This paper presents the control algorithm of a single-phase AC/DC/AC PWM converter for the linear compressor of a refrigerator. The AC/DC/AC converter consists of a full-bridge PWM converter for the control of the input power factor and a half-bridge PWM inverter for the control of the single-phase linear compressor. At the DC-link of this topology, two capacitors are connected in series. These DC-link voltages must be balanced for safe operation. Thus, a new control method of DC voltage balancing for the half-bridge PWM inverter is proposed. The balancing algorithm uses the Integral-Proportional controller and inserts the DC-offset current at the Proportional-Resonant current controller of the inverter to solve the DC-link unbalanced voltages between the two capacitors. The proposed algorithm can be easily implemented without much computation and additional hardware circuit. The usefulness of the proposed algorithm is verified through several experiments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.4
• /
• pp.429-435
• /
• 2020

North Korea declared itself complete with nuclear force after its sixth nuclear test in 2017. Despite efforts at home and abroad to denuclearize the Korean Peninsula, the prospects for the denuclearization are not bright. Along with political and diplomatic efforts to deter NK's WMD threats, the government is required to strengthen its consequence management capabilities against 'catastrophic situations' expected in case of emergency. Accordingly, this study was conducted to present measures to strengthen follow-up management against CBRN threats. The research model was partially supplemented and utilized by the THIRA process adopted and utilized by the U.S. Department of Homeland Security among national-level disaster management plan development models. Korea's consequence management (CM) system encompasses risk and crisis management on disaster condition. The system has been carried out in the form of a civil, government and military integrated defense operations for the purpose of curbing the spread or use of CBRNs, responding to threats, and minimizing expected damages. The preventive stage call for the incorporation of CBRN concept and CM procedures into the national management system, supplementing the integrated alarm systems, preparation of evacuation facilities, and establishment of the integrated training systems. In the preparation phase, readjustment of relevant laws and manuals, maintenance of government organizations, developing performance procedures, establishing the on-site support systems, and regular training are essential. In the response phase, normal operations of the medical support system for first aid and relief, installation and operation of facilities for decontamination, and development of regional damage assessment and control guidelines are important. In the recovery phase, development of stabilization evaluation criteria and procedures, securing and operation of resources needed for damage recovery, and strengthening of regional damage recovery capabilities linked to local defense forces, reserve forces and civil defense committees are required.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.173-179
• /
• 2012

The purpose of this paper is to examine the effects on reliability of equipment or product which spends a great deal of its time in the dormant condition. Many systems experienced periods of dormancy throughout their life cycle, such as periods of operational storage where the system waits, ready for use. The design of such systems must account for how these period of dormant effects system performance. The methodology for predict and analysis was developed to support the evaluation of dormant modes of operation of systems and subsystems. For proper handling of the dormant environment, issues relating to dormant failures need to be taken into consideration from design stage of the lifecycle. Furthermore, the relevant environmental concerns that need to be taken into consideration depend on the environmental factors associated with each different target environment. This paper will look at dormant reliability, the possible dormant reliability models and the methodology on life cycle reliability which has different dormant phase.

• Nuclear Engineering and Technology
• /
• v.20 no.4
• /
• pp.253-264
• /
• 1988

Our experience of neutron noise analysis in French-type 900 MWe pressurized water reactor (PWR) is presented. Neutron noise analysis is based on the technique of interpreting the signal fluctuations of ex-core detectors caused by core reactivity changes and neutron attenuation due to lateral core motion. It also provides advantages over deterministic dynamic-testing techniques because existing plant instrumentation can be utilized and normal operation of the plant is not disturbed. The data of this paper were obtained in the ULJIN unit 1 reactor during the start-up test period and the statistical descriptors, useful for our purpose, are power spectral density (PSD), coherence function (CF), and phase difference between detectors. It is found that core support barrel (CSB) motions induced by coolant flow forces and pressure pulsations in a reactor vessel were indentified around 8 Hz of frequency.

• World Technopolis Review
• /
• v.6 no.2
• /
• pp.148-158
• /
• 2017

Sejong City, which has been chosen as a new administrative capital of South Korea, has completed the first phase of its development plan with the construction of the facilities needed to accommodate central administrative organizations and the required accompanying population. Now, it is undergoing the second phase of development with a focus on strengthening the region's innovation capacity to catalyze endogenous development. The strategy for phase II is to establish a regional innovation system including building necessary infrastructure and attracting innovation agents such as universities, businesses, and research institutes. The first step for this is developing a research complex, tentatively named Tech Valley, that includes universities, research institutes, and businesses, and building infrastructure comprising a science complex, a knowledge industry center, and support facilities. Phase II of the city's development initiative includes the establishment of a joint university campus, which is to serve as a center to promote cooperation among industry actors, universities, and research institutes. The concept of a joint campus has been drawn from a need to enhance capacity for innovation and specialization in the region's industries and to maximize synergy among participating universities through the sharing of research equipment, facilities, and programs. The joint campus is expected to play a key role in creating an innovation system in the region by enhancing research capacity for strategic industries, cultivating highly skilled human resources, and leading industry-academia-research cooperation. In order to ensure the sustainable development of the new city, there is a growing need to have a main player in place that could lead the region's economic development. The joint campus will propel industrial specialization and serve as a catalyst to attract competent universities to the region. This paper will examine the concept, major functions, and the establishment and operation of the joint campus.