• Research in Mathematical Education
• /
• v.16 no.4
• /
• pp.217-232
• /
• 2012

While many studies on early algebra have been conducted, there have been only a few studies on the operation sense as the fundamental element of algebraic thinking, especially the fraction operation sense. This study explored the dimensions of fraction operation sense and then investigated students' fraction operation sense. A total of 183 of sixth graders were surveyed and 5 students who showed high operation sense were clinically interviewed in order to analyze their algebraic thinking in detail. The results showed that students had a tendency to use direct calculation or employ inappropriate operation sense rather than to use the structure of operation or the relation between operations on the basis of algebraic thinking. This study implies that explicit instruction on early algebra is necessary from the elementary school years.

• Journal of Korea Port Economic Association
• /
• v.20 no.1
• /
• pp.21-42
• /
• 2004

This paper addresses the operation, problems, and development policy of Gwangyang Port, Korea. This paper aims to analyze the operation condition and problems of Gwangyang Port and suggest long-term policies for developing Gwangyang Port as a logistic hub in northeast period. It is made up of three main sections: the operation, problems, and forecast of freight volumes; analysis of operational results of Gwangyang Port; development strategies of Gwangyang Port as a Logistics Hub. This paper was mainly based on a review of current papers/reports, an analysis of secondary data, and questionnaire survey. The major development strategies identified consisted of expansion regular service sea-route, formation of inter-modal transportation system, strengthening of port sales for Gwangyang port's recognition, securing operation-profits by fixed cargo volume, and promotion of free tread zone.

• IE interfaces
• /
• v.17 no.4
• /
• pp.450-458
• /
• 2004

S-Distribution Center supplies parts to three plants of K-automobile manufacturing company. Since the three plants employ the JIT production system, it is important for S-Distribution Center to deliver small quantities of parts frequently and quickly on time. This paper presents a case study on the improvement of order-picking operation in S-Distribution Center. The study is focused on the reductions of move time and waiting time by redesigning the parts storage location, picking-order terminal location, retrieval policy, and equipment operation policy. The proposed operation system for S-Distribution Center is evaluated through a simple computation analysis and computer simulation. Furthermore, the reducible numbers of equipment and order pickers are investigated by performing a sensitivity analysis.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.91-91
• /
• 2001

This paper is on 3D virtual reality simulator for terminal in connection with terminal operation system in real terminal in order to reflex complicated terminal operation and environment. This simulator has been developed based on knowledge of terminal planning and operation analysis and advanced software technologies that TSB has accumulated over 10 years. In this study, the simulator generates terminal layout and component of terminal in the same environments as the real terminal in Ohi, Japan and uses real operation system using real planning data in the past in order to describe 3D VR simulation that integrates container handling equipment and real time communication of job ordering. In addition, it is suggested various statistics and analysis report can be used to derive decision supporting factors that optimize design of terminal and improve operation, which will eventually increase terminal productivity.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1024-1030
• /
• 1993

In manufacturing press die with free surface, grinding operation is an important post process for surface finish and dimensional accuracy. With the advancement of NC technology. surface grinding operation is increasingly replaced by the gantry type manipulator. As the mechanics for grinding operation is different from machining operation, conventional CAM system for machining operation is hard to apply. In this. paper, we develop a five-axis CAM system by which an efficient gantry trajectory can be planned and verified. The developed system consists of four conceptual modules; namely CAD, PROCESS. CAM, and ANALYSIS. In the CAD module, the machined surface is represented by CL-data or surface modeler, and process parameters are specified by the PROCESS module. Then, the CAM module generates a series of grinding paths based on the grinding mechanics together with process databases for tool spaces and grinding conditions. The generated paths are verified via ANALYSIS module. Validation via real experiments is left for further study.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1303-1308
• /
• 2004

This paper proposes a reduction method for the mis-operation analysis of the DC High Speed Circuit Breaker(HSCB) in electric railway substation system. The analysis method is based on present condition of operation which is a method for accuracy level up. There is reason to operation of HSCB that it is mis-operation of fault detection relay(50F), operation of ground fault relay(64P), and trouble of electric car. A countermeasure is relay resetting through field test, induction of GTOCB(Gate Turn Off Thyristor Circuit Breaker), HSVCB(High Speed Vacuum Circuit Breaker), coordination with electric car. The results presented in the paper can be used as a reference for maintenance free in electric railway substation system.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.312-319
• /
• 2012

The operation principle of an axial flux-switching hybrid excitation synchronous machine (AFHESM) is analyzed and its topology structures are proposed in this paper. After some comprehensive analysis of the operation principle to axial flux electrical machine, flux-switching electrical machine and hybrid excitation electrical machine, the operation principle of AFHESM is given. Combined with some typical topological structures of hybrid excitation electrical machine, some possible topological structures are proposed and some comprehensive comparisons are carried out. The analysis results show that the stator-separated AFHESM has some advantages such as less AM turns, less impact on the demagnetization of PM, less magnetic flux-leakage and higher efficiency compared to other topologies.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.243-253
• /
• 2008

This paper deals with the analysis, design, and implementation of a single phase AC-DC Zeta converter with high frequency transformer isolation and power factor correction(PFC) in two modes of operation, discontinuous current mode of operation(DCM), and continuous current mode of operation(CCM). A Digital Signal Processor(DSP) based implementation is carried out for validation of the Zeta converter developed design in discontinuous mode of operation. A comparison of both modes of operation is presented for a 1kW power rating from the point of view of steady state and dynamic behavior, power quality, simplicity, control technique, device rating, and converter size. The experimental results of a developed prototype of Zeta converter are presented for validation of the developed design. It is observed that CCM is most suitable for higher power applications where it requires some complex control and sensing of the additional variables.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.113-114
• /
• 2020

In the design and maintenance of buildings, identifying the degree of damage in the event of a fire is an important factor in fire prevention and fire safety design. In order to predict fire damage, safety measures should be established by predicting the nature of evacuation according to fire, smoke and in-house characteristics, and the effects of the operation of fire safety facilities should also be considered, but in Korea, the risk analysis due to the operation of fire safety facilities is insufficient. Accordingly, this study uses fire statistics and sprinkler inspection data to analyze the degree of fire damage caused by the operation of sprinkler facilities in a probabilistic manner.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.93-110
• /
• 2022

The purpose of this study is to explore business investment and operation of O2O (Online-To-Offline) combined service. The study will analyze the necessary factors for growing the business by dividing the O2O service by industry. The Online-to-Offline is a method of inducing purchases of products and services by connecting between online and offline This research methodology organized the four stages of the analysis process. The analysis of all stages was performed with association rules in big data techniques. It is divided into the start-up period, growth period, maturity period, and decline period, and analysis is conducted on the business investment, expenditure cost, business operation, and conflict factors. As the research result, the first analysis has shown commonality with government subsidies, bank loans, and personal funds in all industries. The second analysis showed a lot of expenditure on labor costs of internal employees, marketing/sales, facility facilities, equipment, and equipment purchase costs. The third analysis showed difficulty in raising the investment resources necessary for business operations in all industries. The last analysis showed conflicts in the industry, businesses license, legal systems, and small business owners in all industries. This study contributed to the abundance and diversity of research methodologies in management information systems using association rules. In addition, the description of organizational development theory was updated while explaining the business investment and operation of O2O combined services. In practical implication, the O2O services include environmental factors that cause convergence between industries. Accordingly, this is required for new O2O services through new laws and systems and reorganization of existing laws and regulations.