• 한국가스학회지
• /
• 제8권4호
• /
• pp.15-22
• /
• 2004

본 연구는 LNG 기지 내 주요 프로세스 설비인 LNG 고압펌프의 운전유량 및 토출압력을 조절함으로서 공정운영 조건을 개선하기 위해 수행되었다. 공정 해석 시뮬레이터인 ASPEN PLUS를 사용한 고압펌프의 실제 운전 성능분석 및 천연가스 송출부하 분석을 통하여 계절별 적정 LNG 고압펌프 토출유량을 결정하였고 그 결과는 현장운전에 적용되었다. 이로 인하여 고압펌프 소모 전력비용을 낮출 수 있으며, LNG기지 내 운영 프로세스 압력을 감소 시켜 보다 안전적인 기지운영을 유도할 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권2호
• /
• pp.172-178
• /
• 2016

In this paper, we propose a sub-10 nm Ge/GaAs heterojunction-based tunneling field-effect transistor (TFET) with vertical band-to-band tunneling (BBT) operation for ultra-low-power (LP) applications. We design a stack structure that is based on the Ge/GaAs heterojunction to realize the vertical BBT operation. The use of vertical BBT operations in devices results in excellent subthreshold characteristics with a reduction in the drain-induced barrier thinning (DIBT) phenomenon. The proposed device with a channel length ($L_{ch}$) of 5 nm exhibits outstanding LP performance with a subthreshold swing (S) of 29.1 mV/dec and an off-state current ($I_{off}$) of $1.12{\times}10^{-11}A/{\mu}m$. In addition, the use of the highk spacer dielectric $HfO_2$ improves the on-state current ($I_{on}$) with an intrinsic delay time (${\tau}$) because of a higher fringing field. We demonstrate a sub-10 nm LP switching device that realizes a good S and lower $I_{off}$ at a lower supply voltage ($V_{DD}$) of 0.2 V.

• Journal of Biosystems Engineering
• /
• 제36권5호
• /
• pp.303-313
• /
• 2011

This study was conducted to investigate the effects of axle weight distribution and inflation pressure of tire on the fuel economy of tractors as well as operational range of tractor engine in terms of engine speed and power when a 4WD tractor of 38.2 kW rated power at 2500 rpm is used for plowing and flooded-field rotavating in paddy fields. (1) Plowing operation required an average engine power of 9.6~13.5 kW which equals 25~35% of rated PTO power. Engine speed ranged from 1,320.4 to 1,737.4 rpm, work velocity from 3.4 to 4.8 km/h, and fuel consumption from 3.2 to 4.2 L/h, respectively. (2) Flooded-field rotavating required an average engine power of 11.5~18.5 kW which equals 30~48.4% of rated PTO power. Out of this 6.2~12.2 kW was used for PTO power. Engine speed ranged from 1,557 to 2,067 rpm, work velocity from 2.5~5.4 km/h and fuel consumption from 3.2~5.5 L/h, respectively. (3) Axle weight distribution, inflation pressure of tire and moisture content of soil did not affect significantly the specific volumetric fuel consumption but affected significantly the fuel consumption per unit area of operation. Fuel savings amounted to 65% in plowing operation and 20% in flooded-field rotavating when the axle weight distribution and inflation pressure of tire were optimally adjusted. (4) Optimal adjustment of axle weight distribution and inflation pressure of tire are expected to save fuel consumption by 10~65% per unit area of operation in plowing and 10~20% in flooded-field rotavating.

• 농업과학연구
• /
• 제48권4호
• /
• pp.1039-1050
• /
• 2021

The purpose of this study is to measure load data for a 55 kW class agricultural tractor during a harvesting operation and to analyze the required power according to the working conditions. A field test was conducted at three different tractor speeds (1.2, 1.3, and 1.4 km·h^-1). A load measurement system was developed for the front axles, rear axles, and for power take-off (PTO). The torque and rotational speeds of the axles and PTO were measured during the field test and were calculated as the required power. The results showed that the total required power was in the range of 4.86 - 5.48 kW during the harvesting operation according to the tractor speed, and it was confirmed that this represents a ratio of 8.8 - 10.0% of the engine rated power. Also, it was confirmed that the required power of the axle and PTO increased as the tractor speed increased. In future studies, we plan to supplement the measurement system for a tractor to include a hydraulic system and perform a field test for harvesting various underground crops.

• Journal of Biosystems Engineering
• /
• 제6권1호
• /
• pp.15-27
• /
• 1981

극소형(極小形) 동력경운기(動力耕耘機)(3.5PS:KC-450)의 포장작업성능(圃場作業性能)을 조사분석(調査分析)하고 이에 대(對)한 이용범위(利用範圍)를 결정(決定)하고저 1980년(年) 3월(月)부터 1980년(年) 10월(月)까지 안성읍(安城邑) 석정동(石井洞) 시험포장(試驗圃場)에서 8PS(DT-85), 5PS(DT-40) 경운기(耕耘機)와 대비(對比)하여 耕耘(경운), 쇄토(碎土), 배토작업(培土作業)에 대(對)한 포장작업성능(圃場作業性能)을 조사(調査) 분석(分析)한 결과(結果)를 종합(綜合)하면 다음과 같다. 변속단수별(變速段數別) 작업능률(作業能率)과 포장작업(圃場作業) 효율비교(效率比較) 시험(試驗)에서는 1. 작업속도(作業速度)가 0.9m/sec일때 KC-450기(機)의 이경작업능률(犁耕作業能率)은 125분(分)/10a 무료 DT-85기(機)보다 26분(分)/10a 정도(程度)낮았다. 2. 작업속도(作業速度)를 1m/sec로 이경작업(犁耕作業) 할때에 KC-45기(機)의 포장작업성능(圃場作業性能)은 82%로 DT-85기(機)보다 5% 높았다. 3. 동일(同一) 작업속도(作業遠度)의 쇄토작업(碎土作業)에 있어서 작업능률(作業能率)은 DT-40기(機)와 DT-85기(機)가 높았고 포장작업효율(圃場作業效率)은 KC-450기(機)와 DT-40기(機)가 높았다. 4. 동일(同一) 작업속도(作業遠度)의 배사작업(培士作業)에 있어서 공시기(供試機) 모두 작업능률(作業能率)은 별차이(別差異)가 없었고 포장작업효율(圃場作業效率)은 KC-450기(機), DT-40기(機), DT-85기(機)의 순(順)으로 높았다. 구획규모별(區劃規模別) 작업능력(作業能力) 비교(比較) 시험(試驗)에서는 5. 구획(區劃) 면적(面積)이 클수록 작업능률(作業能率)은 공(共)히 향상(向上)되나 구획면적(區劃面積)이 8a이하(以下)에서는 KC-450기(機)가 작업능력면(作業能力面)에서나, 포장효율면에서 보다 유리(有利)하였다. 작업심도별(作業深度別) 작업능률(作業能率)은 비교(比較) 시험(試驗)에서는 6. DT-85로는 심경(深耕)의 능률적(能率的)인 중작업(重作業)에 유리(有利)하였고 KC-450기(機)는 경심(耕深) 12cm의 모든 작업(作業)에서 운전조작(運轉操作)이 용이(容易)하고 포장작업효율(圃場作業效率)이 타기종(他機種)에 비(比)하여 높았다. 7. 이하(以下)의 결과(結果)로 KC-450기(機)는 채소원예(菜蔬園藝), 약초(藥草), 연초(煙草), 비닐하우스등(等)의 소구획(小區劃), 소규모(小規模) 농작업(農作業)에 신기종(新機種)으로 개발(開發)이 요망(要望) 된다고 사료(思料)된다.

• 환경영향평가
• /
• 제22권6호
• /
• pp.581-589
• /
• 2013

Generally, Sewage Treatment Plants(STPs) are complexes systems in which a range of physical, chemical and biological processes occur. However, their performance strongly depends on the know-how acquired by the field-engineer. Recently, in order to solve this situations, various operation and management technologies based on the Instrumentation, Control and Automation(ICA) have been developed. As a economies-environmental affect point of view, this study was for the performance evaluation and assessment of results from the Smart Operation System(SOS) in full-scale STP. The SOS in STP consisted of the process monitoring module, including real-time influent prediction and effluent simulation, and the Smart Air Control(SAC) module. According to the results from field test for 2 years, the results of economical evaluation, amount of benefits and cost saving by the SOS have shown to be much higher than that of traditional operation. Nevertheless, the removal load(kg/yr) of BOD 13.3 %, COD 28.2 %, TN 44.4 % and TP 20.8 % were increased, respectively. Remarkable improvement of removal load could be achieved after the SOS was adapted. It was concerned that the SOS offer a user friendly functionalities and cost saving needed by the field-engineers. In addition, it was expected that the results of this study would supply helpful information for design and cost saving for the SOS in full-scale STP.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.89-99
• /
• 2020

This study analyzed the load and the consumed power characteristics of a potato harvesting operation in a dry field. The potato harvesting operation was performed using an underground crop harvester mounted on an agricultural tractor with a rated engine power of 23.7 kW. The rotational speeds and the torque of the engine output shaft, rear axle, and power take-off (PTO) shaft were measured under various working conditions. The load spectrum and the consumed power were analyzed using the measured data. The results show that the consumed power of the rear axle increased as the working speed increased, while that of the PTO shaft decreased. The consumed power of the engine output shaft showed a similar trend with that of the PTO shaft, but the torque deviation was larger in the load spectrum. The results of previous studies were used to compare herein the consumed power and the load characteristics of the harvesting, rotary, and plow operations in a dry field. PTO and tractive power were highly consumed in the plow and rotary operations, respectively. The consumed power of the PTO shaft and the rear axle in the harvesting operation were 29-41% and 18-23% of the engine power, respectively. Compared to those in the rotary and plow operations, the engine power was relatively evenly distributed to the PTO shaft and rear axle in the harvesting operation.

• 소음진동
• /
• 제11권2호
• /
• pp.354-364
• /
• 2001

The vibration induced by high speed train running on rail is dealt with as an environmental problem. The train induced vibration is characterized by moving loads at specific frequencies and soil conditions. In fact, it is predicted that the vibration sources are involved the wheel distance, number of cars, speed of operation, drift of rails, structural born vibration, etc. In this paper the characteristics of transferring vibration induced by the high-speed train in operation is discussed. Field measurements was conducted at region from Chungnam Yungj So-jung-myan to Chungbuk Chungwon hyun-do-myun. In the near future. these data will be used as the fundamental data for establishment of the countermeasure for vibrational reduction of high speed train using the results of the field measurements and quantitative prediction of the vibration level

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.401-404
• /
• 2006

This study is the part of the investigation of the state of the art in ultra high flowing concrete (UHFC), applied in practical field construction, in order to develop the technology for improving workability. This paper includes a brief introduction of water content variance properties in UHFC before and after the pumping operation. Test showed that water content in all parameters decreased after the pumping. This is due to the increase of an absorption ratio of coarse aggregate by the pressure of the pumping operation. thus decreasing the water content. Therefore it should be considered to find out the possibility, which can improve the workability, suffering from over viscosity by the lower water content, in field construction.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.540-546
• /
• 2013

The induction motor is used for driving the special equipments such as warship and submarine pump due to robust structure and simple maintenance. Domestic and foreign warships use a wide range of voltages and the DC voltage sources mainly from battery. In the low voltage level, the ${\Delta}$-connection operation of induction motor can be used for the maximum power. However, the temperature of the inverter increases because of the high input current. On the other hand, Y-connection operation of the induction motor does not cause a problem of temperature because of the low input current compared to the ${\Delta}$-connection. But the lack of the supply voltage can not be avoided. Therefore, this paper suggests the algorithm of the optimum field weakening control to extend the operating range of the induction motor with maximum power in a limited thermal and DC voltage condition.