• Smart Structures and Systems
• /
• v.6 no.9
• /
• pp.1079-1105
• /
• 2010

Railway transport of goods and passengers is effective in terms of energy conservation and travel time savings. Safety and ride quality have become important issues as train speeds have increased. Due to increased speeds, minor damage to railway structures and abnormal interactions between trains and structures have given rise to increasingly serious accidents. Therefore, structural health and operational conditions must be monitored continuously in all service environments. Currently, various health and operation management systems are being developed and these are reducing both maintenance frequency and costs associated with disassembly. In this review, major damage and malfunctions and their locations are first analyzed based on numerous references. Then advanced train health and operation management technologies are classified into wayside detection methods and advanced integrated sensor methods and their operating principle and functions are reviewed and analyzed.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1451-1453
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on the 7 line that has been developed on the basis of the standardized type EMU for korea railway systems.

• Industrial Engineering and Management Systems
• /
• v.14 no.2
• /
• pp.175-182
• /
• 2015

The recent manufacturing industry in Japan has found it difficult to transfer skills from trained workers to inexperienced workers because the former ages and then retires. This is a particular problem for lathe process, as this operation requires explicit and tacit knowledge, and defining the skills clearly in a manual is difficult. This study aims to develop a training system for lathe operation by using a simulator; this includes formulas that help define the relationship between the speed of tool feed and cutting sound/shape of chips which were proposed in the preceding study. The developed training system is verified the effectiveness.

• The Journal of Korean Medical History
• /
• v.20 no.2
• /
• pp.81-86
• /
• 2007

In ancient East Asia surgical methods existed even before the modern surgical methods were introduced. These surgical methods were mainly used to treat tumor, bruises, and dermatosis. The methods include many techniques such as making incisions in the skin, tell when to operate, and the aftercare following an operation. The traditional ways are not practiced any more due to its being replaced by the anesthesia techniques originating from the West, but the ancient methods can still be found in documents and these methods can be reproduced through such documents. There is a possibility that this ancient method could replace the present day method because of its nature-friendly characteristic as well as its post-operation management.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1053-1059
• /
• 2009

Construction system modeling can enhance work performance by following the behaviors of a system. System behaviors may originate from physical aspects of a system, namely operation level variables, or from non-physical aspects of a system known as context level variables. However, construction system modelers usually focus on only one type of system variable (i.e., operation level or context level) which can lead to less accurate results. Hybrid modeling with System Dynamics (SD) and Discrete Event Simulation (DES) is one of the approaches that has been utilized to address this issue. In this research, an SD-DES hybrid model of a steel fabrication shop is developed, and the benefits of capturing context level variables together with operation level variables in the model are discussed.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.383-386
• /
• 2006

High temperature size exclusion chromatography (SEC) has been used widely for the characterization of crystalline polymers, for which high temperature operation above the polymer melting temperature is required to dissolve the polymers. However, this high temperature operation has many advantages in SEC separation in addition to merely increasing polymer solubility. At high temperature the eluent viscosity decreases, which in turn decreases the column backpressure and increases the diffusivity of the analytes. Therefore, many reports on the high temperature operation of high performance liquid chromatography (HPLC) have focused on shortening the analysis time and enhancing the resolution. However, the application of high temperature SEC analysis to exploit the merits of high temperature operation is scarce. In this article, therefore, we report on a new apparatus design for high temperature SEC.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.12
• /
• pp.1890-1896
• /
• 2006

Lumostatic operation for cultivation of Haematococcus pluvialis was assessed to test the scale-up strategy of photobioreactors. Lumostatic operation is a method of maintaining a proper light condition based on the specific light uptake rate ($q_e$), by cells. Lumostatic operations were performed in 0.4-, 2-, 10-, and 30-1 scale bubble column photobioreactors and the results were compared with cultures illuminated with constant light intensity. Significant differences were observed in the maximal cell concentrations obtained from 0.4-, 2-, 10-, and 30-1 scale photobioreactors under constant light intensity, yielding the maximal cell concentrations of $2.8{\times}10^5$, $2.2\times10^5$, $1.5\times10^5$, and $1.1\times10^5$ cells/ml, respectively. The maximal cell concentration in a 0.4-1 photobioreactor under lumostatic operation was $4.3\times10^5$ cells/ml. Furthermore, those in 2-, 10-, and 30-1 scale photobioreactors were about the same as that in the 0.4-1 photobioreactor. The results suggest that lumostatic operation with proper $q_e$ is a good strategy for increasing the cell growth of Haematococcus pluvialis compared with a constant supply of light energy. Therefore, lumostatic operation is not only an efficient way to achieve high cell density cultures with minimal power consumption in microalgal cultures but it is also a perfect parameter for the scale-up of photobioreactors.

• Journal of Drive and Control
• /
• v.20 no.2
• /
• pp.31-39
• /
• 2023

The aim of this study was to measure and analyze engine load factor (LF) according to working conditions (operation type and gear stage) of small agricultural multi-purpose cultivator to estimate the emission of air pollutants. To calculate LF, a torque sensor capable of collecting torque and rotational speed was installed on the engine output shaft and DAQ was used to collect data. A field test was conducted with major operation of a cultivator and tillage operations (plow tillage and rotary tillage). Engine power was calculated using engine torque and rotational speed and LF was calculated using real-time power and rated power. In addition, unified LF was calculated using the weight for each operation and the average LF for each operation. As a result, average LF values at 1.87 and 3.10 km/h by plow tillage were 0.50 and 0.69, respectively. Average LF values at 1.87 and 3.10 km/h by rotary tillage were 0.70 and 0.78, respectively. Furthermore, unified LF calculated in consideration of the weight factor showed a value of 0.65, which was 135% higher than the conventional LF (0.48). Results of this study could be used as basic information for realizing LF values in the field of agricultural machinery.

• Journal of Chest Surgery
• /
• v.41 no.3
• /
• pp.305-312
• /
• 2008

Background: Anatomic and functional abnormalities of the systemic atrioventricular (AV) valve are common in single ventricle. pathologies and continue to be associated with poor early and late outcomes in surgically palliated single. ventricle patients. We aggressively performed valvuloplasty for atrioventricular valve regurgitation (AVVR) during the course toward a Fontan operation. Material and Method: Between January 1995 and December 2004, 209 patients underwent a Fontan operation in our institution. We retrospectively evaluated the prevalence of AVVR and the influence of AV valve repair on outcome, and we analyzed the progression of AVVR after the Fontan operation for 168 patients where echocardiographic follow up results for more than 6 months after the Fontan operation were available. During the course toward a Fontan operation, 25 patients underwent 30 procedures for AVVR. These procedures. were. carried out during placement of a bidirectional cavopulmonary shunt (BCPS) for nine patients, between the time of placement of a BCPS and the Fontan operation for four patients, and during the Fontan operation for 17 patients. Five patients underwent procedures for AVVR twice. Result: The late mortality rate after the Fontan operation was 4.2% (n=7), with a median follow-up duration of 52 months (range, $6{\sim}123$ months). Seven patients (4%) had unfavorable outcomes such as significant (moderate or severe) AVVR in six patients, and significant AV valve stenosis in one patient was determined at the last follow up after the Fontan operation. Among the seven patients, four patients underwent AV valve repair after the Fontan operation, and one patient underwent subsequent AV valve replacement. Progression to AVVR of equal to or greater than grade 2 was noted in 30 patients (18%) at the last follow up after the Fontan operation, including 12 patients that underwent previous AV valve procedures. Initial grading of AVVR, a previous AV valve operation, and specific AV valve morphology such as a common AV valve or mitral atresia were significant risk factors for the progression of AVVR after the Fontan operation. Conclusion: In our surgical series, a small percentage of patients showed unfavorable outcomes. related to AVVR during the course toward a Fontan operation. However, a closer follow-up is required to evaluate the progression of the AVVR after a Fontan operation, especially for patients showing poor AV valve function at the first presentation and specific AV valve morphology.

• Journal of Trauma and Injury
• /
• v.26 no.3
• /
• pp.233-237
• /
• 2013

Delayed traumatic intracerebral hemorrhage (DT-ICH) is a rare event in head trauma patients. However, it develops unexpectedly and results in very severe brain damage. Thus, close monitoring of the neurologic status is needed for every trauma patient. Sometimes, however, neurologic monitoring cannot be done because of sedation, especially in cases of abdominal surgery. In this case report, we describe the case of a 37-yr-old, male patients who had hemoperitoneum because of spleen and renal injury. At the initial operation, massive bleeding was found, so gauze-packing surgery was done first. After the first operation, we sedated the patient for about two days, after which the packed gauze was removed, and the abdominal wound was closed. Immediately after the second operation, we found pupil dilation. Emergent CT was performed. The CT revealed DT-ICH with severe brain edema and midline shifting. However, the patient condition deteriorated progressively despite emergency operation, he expired 2 days after hematoma evacuation.