• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.945-952
• /
• 2019

The International Maritime Organization (IMO) adopted the International Convention on the Control of Ships' Air Pollutants and Discharge as it became interested in environmental issues such as global warming and air pollution. In addition, a special bill on the improvement of air quality, including in port areas, has recently been enacted in Korea to reduce the amount of fine dust generated. As part of such fine dust reduction measures, feasibility studies have been underway on converting diesel engines into battery electric propulsion systems that do not cause fine dust and emissions. Since the battery electric propulsion system can easily utilize renewable energy sources, and does not generate exhaust gas due to combustion of fuel, small coastal ferries with battery electric propulsion systems that use renewable energy have been operating in Europe and the U.S. for several years. However, they have not been introduced in Korea. Therefore, in this study, we selected small coastal ferries in Korea as target ferries, and performed simulations to study the applicability of electric propulsion with batteries linked to solar power systems. Based on the results, we want to confirm the applicability of battery electric propulsion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.953-960
• /
• 2019

The Miller cycle is a diesel engine that has been developed in recent years that it can reduce NOx and improve fuel consumption by reducing the compression ratio through intake valve closing (IVC) time control. The Miller cycle can be divided into the early Miller method of closing the intake valve before the bottom dead center (BDC) and the late Miller method of closing the intake valve after the BDC. At low speeds, the late Miller method is advantageous as it can increase the volumetric efficiency; while at medium and high speeds, the early Miller method is advantageous because of the high internal temperature reduction effect due to the expansion of the intake air during the piston lowering from IVC to BDC. Therefore, in consideration of the ef ects of the early and late Miller methods, it is necessary to adopt the most suitable Miller method for the operating conditions. In this study, a two-stage turbo charge system was applied to four-stroke engines and the process of enhancing the Miller effect through a reduction of the intake and exhaust valve overlap as well as the valve change adjustment mechanism were considered. As a result, the ef ects of fuel consumption and Tmax reduction were confirmed by adopting the Miller cycle with a two-stage supercharge, a reduction of valve overlap, and an increase of suction valve lift.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.129-138
• /
• 2016

Shipping companies involved in sea transportation service are exposed to uncertainty due to its volatile business environment. It is crucial that shipping companies take effective strategies to cope with uncertain business environments and to achieve high business performance. Using Porter's generic strategy, this study investigates the relationships between environmental uncertainty and competitive strategies, and the impact of competitive strategies on firm's business performance. To test hypotheses, OLS regressions and Tobit analysis were conducted on Korea shipping companies who provide global sea transportation service. The findings of this study can be summarized as follows. First, variation of environmental uncertainty affects cost-leadership strategy and differentiation strategy. Diversity of environmental uncertainty affects differentiation strategy, but not cost-leadership strategy. Second, firms attain business performance by using the cost-leadership strategy. That is, shipping companies can achieve high business performance by reducing their operating costs in the entire process of transportation service.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.4
• /
• pp.881-915
• /
• 2012

These days, according as the role and function of science and technology become a important solving means of various national and social problems caused in knowledge information society as well as the development of national economy, the national target and mission of science and technology have been newly illuminated. The task of science and technology has embodied into national policies, and these policies acquired institutional foundation through the legal system related to science and technology. Recently, the discussions about the operating system of present science and technology legislation are often happened, if or not the legal system is optimal and appropriate itself under the changed environment. In special, some issues are raised continuously, for example, about the improvement of coordination system on S&T policies, and the governance system on national R&D programs, etc. This paper aims to research and suggest the reorganization method of science and technology law. For this purpose, the development and existing state of S&T legislation was investigated, the government role and policy driving direction were reviewed under the recent changed environment, and the problems of S&T law in structure and content were analyzed in variety of perspectives. On this basis, the reorganization methods of science and technology law are suggested.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.5
• /
• pp.59-66
• /
• 2006

Optimal method of radon analysis in groundwater was studied using ultra low-level liquid scintillation counter (ULLLSC) which is well known as an analytical instrument for analyzing the alpha and beta radionuclides in environmental materials. Optimization of pulse shape analyzer (PSA) in operating the LSC was performed with $^{241}Am\;and\;^{90}Sr/^{90}Y$ as well as $^{226}Ra$ Also, the chemical quenching of scintillation generation and the color quenching of the generated photon to photomultiplier tubes (PMT) were determined their effects not only to decrease the analytical efficiency but also to change the optimal PSA level and background due to high ion contents of groundwaters. The optimal PSA level was shown in the range of 90 to 110 with less than 5% error. The effects of high ion contents in groundwater for the analytical efficiency show within 10% error from the different ion contents. The chloroform as a quenching agent was used to determine the analytical efficiency with the different amount, showing that the efficiency decreases 20% using the 2% of chloroform.

• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.5-22
• /
• 2002

With the rapid advance of internet service and the corresponding migration of service environment from the text-based one to WWW (World Wide Web) environment, the number of internet users is growing rapidly due to its easy usage. Accordingly, usage of internet as services for sending electronic mails to the other party over the network is becoming increasingly prevalent. Web-based electronic mailing system is comprised of a server and a client. The former provides the users with e-mail accounts and services, while the latter serves as a user interface. In other words, it enables those public users who dos not own e-mail accounts on the existing mail server to have an access to the mailing service through the web. In this paper, we designed a effective web-based electronic mailing system which is based on the internet explorer and linux operating system, which overcomes limitations of the existing e-mail systems and meets the need of a cost-efficient alternative. Our electronic mailing system also supports the convenience of users through appropriate handling of preregistered spam e-mails and multiple e-mails, and this facilitates the development of a stable e-mail system by being able to avoiding the low system performance due to the bursty characteristics of e-mail messages and the increasing number of users

• Journal of Science and Technology Studies
• /
• v.19 no.3
• /
• pp.201-246
• /
• 2019

Information technology is sometimes considered as a cause that puts education in a big crisis, or it can be seen as a savior. In 2011, the Korean government announced that it would innovate education and build a talented nation by bringing IT into schools of public education system through the SMART education policy. The policy initiative aimed to establish a standard classroom models that can be diffused all over the country's schools so that teachers and students may become familiar of using devices such as tablet PCs and laptops. This paper analyzes how the smart classrooms caused friction in the actual education practices. To this end, I analyzed the direction and ideals of the SMART education policy by reading government policy document and design guidelines officially published, and visited three elementary schools that are actually building and operating a smart classroom environment to visit the facilities and have in-depth interviews with teachers and technicians. The ideal type of classroom proposed by the smart education policy was a package equipped with various functions at once in a neatly designed space like a "model house", but it was difficult to be used as a normal classroom in everyday life of school. Instead of copying and installing the model, each school decided to get "smart" in its own way, depending on how factors such as size, local characteristics, socioeconomic conditions of students and teachers, teacher experiences, and the level of existing infrastructure were combined. In Elementary School A, the machines tamed specific space of the school to create their own space, while following the rules of the school for being mobile. Although Elementary School B could not construct fully supported environment that encompassed the entire school, the system was organized with the help of well trained teacher's experiences in other schools. In Elementary School C, the machines are concentrated on specific classrooms and they promote teacher's professionalism. The components of the smart classroom were disassembled and recombined in context to make each school's classroom "smart".

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.415-424
• /
• 2019

In this paper, a minimum rotation radius was designed and fabricated to overcome the threshold so that elderly or disabled people who have difficulty moving can move and transfer safely and conveniently in a narrow room. In the indoor environment, where the sedentary culture develops, this study aimed to provide convenience for passengers with fracture diseases, geriatric diseases, and other knee and waist diseases. First, links, seats, armrests, covers, motors, batteries, chargers, controllers, etc. were attached to the frame so that they could be moved and lifted indoors. The product design and structure were designed considering the user's environment and physical characteristics, and IoT functions were added. A driving experiment was performed to confirm the operating performance of the manufactured indoor moving and lifting wheelchair. The performance tests, such as continuous running time, turning radius, maximum actuator load, maximum lift height, sound pressure level, minimum sensing distance of the driving aid sensor, interworking of server and app programs, device compatibility, and duty cycle error rate, were performed. As a result of the test, the built-in wheelchair could achieve the performance test target of each item and operate successfully.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.489-495
• /
• 2018

In this paper, we designed and fabricated WLAN / UWB communication antennas operating at 3.3 [GHz] and 5 [GHz] bands in order to effectively use the high-speed communication network system that improved antenna miniaturization, gain and radiation pattern. Microstrip patch antennas were chosen to improve the bandwidth. The slot width, length, and transmission line width were calculated using the theoretical formula for each step. Simulation results show that the return loss is -14.053 [dB] at 3.3 [GHz] and -13.118 [dB] at 5 [GHz]. The gain showed a value of 2.479 [dBi] at 3.3 [GHz] and a value of 3.317 [dBi] at 5 [GHz]. After optimizing it with the CST Microwave Studio 2014 program, which can be 3D-designed, Based on these results, we investigated the performance of antennas by measuring their characteristics. In recent years, WLAN, which is a variety of wireless technologies that are continuously developing, and UWB, which is a communication technology which is increasing in frequency band due to an increase in demand of the technology users, is used for a high speed wireless communication system. Communication seems to be possible.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.4
• /
• pp.62-69
• /
• 2014

In the results of monitoring nitrate concentration in more than 8,000 groundwater wells around agro-livestock, the average and maximum nitrate concentration was 9.4 mg/L and 101.2 mg/L, respectively. Since about 31% of the monitoring wells was exceed the quality standard for drinking water, nitrate control such as remediation or source regulation is required to conserve safe-groundwater in South Korea. Typical nitrate-treatment technologies include ion exchange, reverse osmosis, and biological denitrification. Among the treatment methods, biological denitrification by indigenous microorganism has environmental and economic advantages for the complete elimination of nitrate because of lower operating costs compared to other methods. Major mechanism of the process is microbial reduction of nitrate to nitrite and nitrogen gas. Three functional genes (nosZ, nirK, nirS) that encode for the enzyme involved in the pathway. In this work, we tried to develop simple process to determine possibility of natural denitrification reaction by monitoring the functional gene. For the work, the functional genes in nitrate-contaminated groundwater were monitored by using PCR with specific target primers. In the result, functional genes (nosZ and nirK) encoding denitrification enzymes were detected in the groundwater samples. This method can help to determine the possibility of natural-nitrate degradation in target groundwater wells without multiplex experimental process. In addition, for field-remediation application we selected nitrate-contaminated site where 200~600 mg/L of nitrate is continuously detected. To determine the possibility of nitrate-degradation by stimulated-natural attenuation, groundwater was sampled in two different wells of the site and nitrate concentration of the samples was 300 mg/L and 616 mg/L, respectively. Fumarate for different C/N ratio was added into microcosm bottles containing the groundwater to examine denitrification rate depending on carbon concentration. In the result, once 1.5 times more than amount of fumarate stoichiometry required was added, the 616 mg/L of nitrate and 300 mg/L of nitrate were completely degraded in 8 days and 30 days. The nitrite, byproduct of denitrification process, was also completely degraded during the experimental period.