• 간호행정학회지
• /
• 제14권1호
• /
• pp.72-84
• /
• 2008

Purpose: The purpose of this study was to identify nurses' duties and tasks for job analysis of the nurses in the operating room. Methods: This study was descriptive investigation research using the 3-point likert scale questionnaires and the level of importance, difficulty and the frequency of each duty and task were analyzed. Data were collected by 422 OR nurses from 57 hospitals. Results: Job of OR nurses included 13 duties and 105 tasks. The 13 duties were 'management of operative patient' 'assistive work for operation' 'supportive work for operation' 'infection control in OR' 'management of equipments and instruments for operation' 'administrating medicine for operation' 'supplies management for operation' 'safety management for operation' 'environmental management for operating room' 'administrative work for operation' 'education for operating room personnel' 'development of operation procedure books' and 'elf development of OR personnel' Conclusion: This study identified duties and tasks performed by OR nurses. Based on these results, the importance, frequency, and difficulty in this study will provide research evidence for developing training programs for OR nurses.

• 간호행정학회지
• /
• 제5권3호
• /
• pp.513-524
• /
• 1999

The shortage of nursing personnel was become one of the most serious problems in operating pediatric oncology nursing unit which was the first pediatric oncology nursing unit in Korea. The purpose of this study was to estimate the optimal number of nursing personnel by calculating nursing care hours. The subjects were 13 staff nurses and inpatients of pediatric oncology nursing unit at Seoul National University Hospital during the period of May 20, 1996, to June 2, 1996. The number of nurses' duty was 132, the number of patients treated was 1288 for these 2 weeks. The tools used for this study were pediatric patient classification indexes and direct & indirect care indexes. Each nurse measured the time that they spent for their activities by self record under the supervision of their nurse manager. The method used to calculate the number of nursing personnel was multiplication of the average number of nursing care hours per patient per day with the number of patients. Percentage, average, t-test, F-test were used for data analysis. The results of this study were as follows : 1) The distribution of patient class : Class I & II none, Class III 86.8%. Class IV 12.9% 2) Direct nursing care hours for a patient per shift according to patient classification: Class III : 27.64 minutes, Class IV : 54.64 minutes The average direct nursing service hours for a patient per shift(3 shift) was 31.54 minutes(94.62 m/day). The average indirect nursing service hours for each patient per duty(3 shift) is 21.3 minutes (63. 91 m/day). 3) The average nursing hours for a patient per duty was 52.80 minutes(2.64h/day). 4) The group of administering medications in direct care activities showed the highest percentage (38.9%). Checking vital signs among observation took the most time am.ong each direct care activity (6.88 minutes for a patient per duty). 5) Charting took the most time of each indirect care activity(52.53 minutes/ duty/nurse). 6) The average personal time per duty is 29.40 minutes, which 'was below 30 minutes of this hospital regulations. 7) The average nursing hours that a nurse provided for a duty was 8.60 hours, which meant that a nurse worked 1.10 hours overtime. 8) Standardizing to a 33 bed to a unit, 17 nurses were needed at the present nursing level.

• 대한전자공학회논문지SD
• /
• 제47권11호
• /
• pp.13-22
• /
• 2010

본 논문은 입력 클록의 고주파 위상 잡음 억제와 정확한 듀티 사이클을 갖는 체배 주파수 생성을 위하여 Voltage-Controlled Oscillator(VCO)/Voltage-Controlled Delay Line(VCDL) 혼용기반의 다중 위상 Delay-Locked Loop(DLL)를 제시한다. 이 제안된 구조에서, 다중 위상 DLL은 혼용 VCO/VCDL의 입력 단에 nMOS 소스 결합 회로 기반의 이중 입력 차동 버퍼를 사용한다. 이것은 고주파 입력 위상 잡음 억제를 위하여 전 대역 통과 필터 특성을 갖는 기존 DLL의 입/출력 위상 전달을 저주파 통과 필터 특성을 갖는 PLL의 입/출력 위상 전달로 쉽게 변환시킬 수 있다. 또한, 제안된 DLL은 추가적인 보정 제어 루프 없이 단지 듀티 사이클 보정 회로와 위상 추적 루프를 이용하여 체배 주파수의 듀티 사이클 에러를 보정할 수 있다. $0.18{\mu}m$ CMOS 공정을 이용한 시뮬레이션 결과에서, 제안된 DLL의 출력 위상 잡음은 800MHz의 입력 위상 잡음을 갖는 1GHz 입력 클록에 대하여 -13dB 이하로 개선된다. 또한, 40%~60%의 듀티 사이클 에러를 갖는 1GHz 동작 주파수에서, 체배 주파수의 듀티 사이클 에러는 2GHz 체배 주파수에서 $50{\pm}1%$이하로 보정된다.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.69-75
• /
• 2019

본 연구의 목적은 EV 경상용차에 적용되는 히트펌프 시스템에 대한 냉방 성능 특성을 실험적으로 분석하는 것이다. EV 경상용차가 운전되는 냉방 운전조건인 외기온도 35 ℃, 내기온도 25 ℃ 상황에서, 히트펌프 시스템의 냉방 특성을 분석하고자, 냉각수의 온도조건, 전동식 압축기 회전수 조건 변화에 대해서, 실험을 진행하였고, 그 결과를 분석하였다. 전동식 압축기 회전수가 증가할수록 냉방 성능이 평균 8.0 %가 증가하였고, 전동식 압축기 소비전력은 27 %가 증가하여서, 시스템 효율은 16.4 %가 감소하는 결과를 보여주고 있다. 전자장비 냉각을 위한 냉각수의 폐열을 활용하기 위하여서, 냉매랑 냉각수가 열교환 하는 칠러를 본 시스템에 적용하였다. 칠러에 적용되는 냉각수의 온도를 35 ℃에서 55℃로 변화시켰을 때, 응축 열원의 증가로 인하여서, 시스템 효율이 평균적으로 18.2 %가 떨어지는 결과를 보여주고 있다. 냉각수 유량 변화 측면에서, 운전 조건을 변화시켰지만, 냉방 성능에는 큰 변화를 보이고 있지 않았다. 향후, 냉각수 폐열을 사용하여서, 히트펌프 시스템에 대한 난방 성능 향상을 위한 연구가 필요한 상황에서, 관련 연구에 추가 할 예정이다.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.91-98
• /
• 2007

This paper presents the induced mathematical modeling equations for evaluating the operation stability with automatic transmission of heavy duty vehicle. This theoretical approach indicates that linearized governing equations of system can be converted into eigen-value problems. if the eigen-value has positive number, we can predict the engine operating point locates an unstable operating region. To be a stable state, the unstable operating point diverges toward a stable point which is able to maintain uniform velocity. Based on the previous theoretical analysis, we carry out dynamic simulation to show the behavior of engine operating point and torque converter in transient state. As a result of the dynamic simulation, the suggested theoretical method is found to be reasonable for evaluating the operation stability of a torque converter. In addition, the numerical results explain the engine stops and fluctuating phenomenon in reality.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.157-160
• /
• 1990

A dot matrix type DC Plasma Display Panel was fabricated and it's characteristics was investigated. Paschen curve and I-V curve of various gas mixture was given. Optimal gas mixing ratio, pressure and operating point was determined. The priming effect was observed and discharge delay time was measured with varing applied voltage, priming current, priming distance, duty ratio.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.327-332
• /
• 1999

In this paper, six harmonic injection PWM method for reducing total harmonic distortion in single switch three phase discontinuous conduction mode boost converter is presented. In the proposed method, periodic six harmonic voltage is injected in the control circuit to vary the duty ratio of the converter switch within a line cycle so that the fifth order harmonic of the input current is reduced. Experimental results are verified by converter operating at 400V/6kW with three phase 140V~220V input.

• Journal of the Optical Society of Korea
• /
• 제8권4호
• /
• pp.149-155
• /
• 2004

Newly developed modal transmission-line theory(MTLT) is used to analyze rigorously the optical power distribution in grating-assisted directional couplers(GADCs) with three guiding channels. By defining a novel coupling efficiency ${\eta}$ amenable to the rigorous analytical solutions of modal transmission-line theory, we explicitly evaluate the power coupling and distribution of TM modes. The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the grating period, the duty cycle, and the operating wavelength.

• 기본간호학회지
• /
• 제15권4호
• /
• pp.566-577
• /
• 2008

Purpose: Developing a curriculum(DACUM) is a method of analyzing job focused competency, which is obtained from the data of an expert belonging to a certain career. In this study the DACUM method was used to analyze the jobs of operating room nurses. Method: Through the DACUM workshop which was arranged by two DACUM facillitators, a definition of the role of operating room nurses was developed and then duties and tasks of operating room nurses' were identified. For the workshop, a DACUM committee with 10 operating room nurses was organized. Finally, the duties and tasks which were identified were validated by 422 nurses for importance, difficulty and frequency. Results: Thirteen duties and 105 tasks were identified on the DACUM chart, where importance, difficulty, and frequency of tasks were represented by alphabet letters A, B, and C as higher degree of importance. The determinant coefficient(DC) showed that the most important duty was assisting with operations(DC=6.61), and the least, managing operating materials(DC=4.22). For tasks, the most important ones were assisting in orthostatic surgery(DC=7.60), and assisting in thoracic surgery(DC=7.38), and the least important making gauze ball(DC=2.39), and saving of operation site((DC=3.27). Conclusion: The results suggest a need to develop an education program using the DACUM chart as a basis for the development and as a clinical career ladder and for curriculum of operating room nursing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.509-514
• /
• 2004

This paper introduces the modified slip energy recovery system in order to improve its power factor and to reduce harmonics of line current waveforms. Twelve pulse line commutated converter with the chopper type IGBT is applied where the chopper is applied across the DC terminal and the chopped DC is fed to the converter operating as an inverter and then passed through the wye-wye and delta-wye transformer circuit. This scheme leads to be able to adjust the speed of the motor by the duty cycle of the chopper operating in PWM mode. The fuzzy logic controller is also introduced to the modified slip energy recovery system for keeping the motor speed to be constant when the load varies. The experimental results in testing the 0.22 kW wound rotor induction motor from no-load condition to rated condition show the effectiveness of the proposed control scheme.