• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.15-25
• /
• 2016

SCM activities in a company are considered as total innovation through synchronizing supply and demand while maintaining appropriate inventory level and reducing the business operating costs. Until now, even several researches are carried out on the SCM performance of the companies which have introduced and been operating SCM, the research on the cost analysis for the inventory which occurs frequently on supply chain is still insufficient. Especially, for the electronics industry in which the product depreciation is sharp caused by the short product life cycle and the complexity of distribution channels, even the inventory related costs are a major factor in business management, since the current estimated criteria of inventory costs are limited to the interest and maintenance management costs, the criteria do not reflect the total influence of the product depreciation and lost opportunity cost which are related to the business management. Furthermore, even though the rapid price drops of the distributor inventory caused by the frequent new model launch can be covered by the product manufacturers, the scale of total costs related to the inventory has not been conceived because the price compensation is traditionally considered as a market costs. In this research, we analyzed the inventory characteristics of electronics industry in which the price depreciation happens frequently, newly defining the estimated criteria of the product total inventory cost which includes price depreciation from the product manufacturers' view. Finally we focus on the case study of a representative electronics company and verify the scale of the influence on management performance.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.4
• /
• pp.281-289
• /
• 2019

Desalination plants are generally studied with higher operating costs compared to water supply facilities. This study was conducted to reduce the cost of water production and to preserve existing water resources. Therefore, the purpose of this study was to utilize the control valves to increase maximum efficiency, thereby reducing the power of the pumps and operating costs. Specific energy consumption was shown to reduce the process operating power by up to 1.7 times from 6.17 to $3.55kWh/m^3$ based on seawater reverse osmosis 60 bar. In addition, the water intake process was divided into pre, inter, and post-according to the use method of blasting, and the water treatment process was divided into pre, inter, and post blending. In order to reduce power consumption, the blending process was combined to operate the facility, which resulted in the reduction of power consumption in the order post > pre-inter> inter blending.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.327-333
• /
• 2010

This study examines the impact different proxies of agency costs have on companies under different governance approaches. The two specific proxies of agency costs used include: (i) the ratio of operating expenses to annual sales; and (ii) the ratio of annual sales to total assets. Our study is based on earlier works of Ang et al. (2000) and Fleming et al. (2005). A comparison of results for small unlisted companies both in US and Australia indicate that agency cost measures have statistically: (1) different result under rule-based governance mechanisms; and (2) the same results under principle-based governance mechanisms. Our findings support the view that the effectiveness different measures of agency cost is dependent on country specific governance facto as well as on the governance approaches adopted. Our results offer insights to both practitioners and policy makers regarding the usefulness of different proxies of agency costs when companies adopt principle-based corporate governance approaches versus rule-based approaches.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.45-52
• /
• 2009

The objective of this was to improve a transportation cost relation between Central Distribution Centers(CDCs) and Regional Distribution Centers(RDCs), to control inventory cost concerning safety stock for each service level, by reviewing distribution steps connecting CDCs and RDCs under the price discount. It was also to examine and compare operating costs for the following two alternative suggestions for setting the service standard as a counter measure for a stock-out of the distribution network system management. First, provision by dispersing the safety stock to the CDCs and RDCs; and second, exclusive provision of the safety stock only to the RDCs. The cost comparison analysis was made for each category of purchase costs, regular transportation costs, express transportation costs, and inventory holding costs.

• KIEE International Transactions on Power Engineering
• /
• v.12A no.1
• /
• pp.31-35
• /
• 2002

This paper presents a new operation scheme of UPFC to minimize both generation costs and active power losses in a normal operation state of power system. In a normal operation, cost minimization is a matter of primary concern among operating objectives. This paper considers two kinds of costs, generation costs and transmission losses. The total generation cost of active powers can be minimized by optimal power flow, and active power losses in the transmission system can be also minimized by power flow control of UPFC incorporated with minimization of generation costs. In order to determine amounts of active power reference of each UPFC required for the cost minimization, an iterative optimization algorithm based on the power flow calculation using the decoupled UPFC model is proposed. For verification of the proposed method, intensive studies have been performed on a 3-unit 6-bus system equipped with a UPFC.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.437-446
• /
• 2005

Recently as people's values are changing from development phase into running stage after quality of life, so that the needs of environmentally friendly construction are gradually increasing. Also populace discontent about the pollution during construction process such as the noise and vibration caused by construction machinery is increasing. Even though it is impossible to eliminate the construction pollution fully, it is necessary to make efforts to reduce construction pollution to a minimum. In terms of construction site operating, the first possible step for solving these matters directly is that the necessary sum of expenses must be secured as the environmental management costs in the conceptual phase. However, in fact, the environmental management costs have not been secured in the budget. Generally it is the major reason not arising proper activities to prevent the pollution in the construction site. The purpose of this research is to suggest the efficient budgeting method regarding Environmental management costs to ensure the necessary sum of environmental management expenses. To provide an efficient budgeting method, interviews with the person in charge of environment management was conducted. 78 construction sites was surveyed and environmental management costs were analyzed through their historical data from the survey. According to the results of analysis, the ratio of environmental management costs is revealed 0.45% of construction cost as average comparing 0.2% of legal limit. And usually the environmental management cost was appropriated into the safety management budget. So it is needed to isolate environmental management budget securely and modify the ratio of Environmental conservation Costs in Construction Technology Management Act.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.687-697
• /
• 2004

This paper is aimed to guide ocean-going companies to reasonable decisions and to increase the competitiveness of Korean shipping industry by clarifying the determinants of political costs of ocean-going companies, which only depend for the enormous amount of money to introduce the operating fixed assets, or the vessels, upon the supporting policy from the government or the loan from the related financial institutions. As independent variables of the political costs, 5 elements were settled such as company size(sales, total assets and market share), debit ratio, capital concentration ratio, profitability(operating profit) and marine risk(sales fluctuation). To verify the relations and the effect level between dependent variables and political costs, the Multiple Regression Analysis Model was applied The result of the analysis shows significantly positive relations between size variables and political cost of shipping industry. Moreover, debt ratio and profitability were proved significant related with political costs of shipping industry.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.43-54
• /
• 2010

In order to improve the existing evaluation system of bus services and gain more reasonable analysis outputs, the authors evaluate the efficiency of 113 arterial bus routes in Seoul in 2009 using a modified BCC model considering not only desirable outputs but also undesirable outputs. Each Decision Making Unit (DMU) is assumed to use inputs such as possession costs, operating costs, the ratios of median bus stops overlapped route lengths to produce estimates of desirable outputs (the number of passengers and service satisfaction score) and undesirable outputs (CO2 emissions). According to the analysis, the modified BCC model considering both desirable outputs and undesirable outputs shows more appropriate results. DMUs would be more efficient on average to reduce nearly 10% of the 3 inputs (possession costs, operating costs, and overlapped route lengths) and increase by about 160% the ratios of median bus stops. Also, a Tobit regression analysis is conducted to identify the most effective variables for maximum efficiency and discover that the variable of possession costs and the ratios of median bus stops are statistically significant.

• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.31-37
• /
• 2007

Because of their low operating and maintaining costs, ground-source heat pump(GSHP) systems are an increasingly popular choice for providing heating, cooling and water heating to public and commercial buildings. Despite these advantages and the growing awareness, GSHP systems to residential sectors have not been adopted in Korea until recently. A feasibility study of a residential GSHP system was therefore conducted using the traditional life cycle cost(LCC) analysis within the current electricity price framework and potential scenarios of that framework. As a result, when the current residential electricity costs for running the GSHP system are applied, the GSHP system has weak competitiveness to conventional HV AC systems considered. However, when the operating costs are calculated in the modified price frameworks of electricity, the residential GSHP system has the lower LCC than the existing cooling and heating equipments. The calculation results also show that the residential GSHP system has lower annual prime energy consumption and total pollutant emissions than the alternative HVAC systems considered in this work.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.64-69
• /
• 2009

Because of their low operating and maintaining costs, ground-source heat pump(GSHP) systems are an increasingly popular choice for providing heating, cooling and water heating to public and commercial buildings. Despite these advantages and the growing awareness, GSHP systems to residential sectors have not been adopted in Korea until recently. A feasibility study of a residential GSHP system was therefore conducted using the traditional life cycle cost(LCC) analysis within the current electricity price framework and potential scenarios of that framework. As a result, when the current residential electricity costs for running the GSHP system are applied, the GSHP system has weak competitiveness to conventional HVAC systems considered. However, when the operating costs are calculated in the modified price frameworks of electricity, the residential GSHP system has the lower LCC than the existing cooling and heating equipments. The calculation results also show that the residential GSHP system has lower annual prime energy consumption and total greenhouse gas emissions than the alternative HVAC systems considered in this work.