• Journal of Engineering Education Research
• /
• v.20 no.3
• /
• pp.50-57
• /
• 2017

The purpose of this study was verify the effect of an engineering-technology program on high school students' technological thinking disposition and engineering attitude. To achieve this purpose, the question were as follows. 1) How does the engineering-technology program affect high school students' technological thinking disposition? 2) How does the engineering-technology program affect high school students' engineering attitude? For this study, the program was progressed from May to Aug in 2016. The data were collected from 138 D high school students which is located in Daejeon, Korea. For the statistical treatment of data, a Window SPSS-22 are used and significance level of .05 was established prior to data treatment. The results of this study were as follows: First, after participate in engineering-technology program was significant effect on the technological curiosity disposition, technological creativity and expression disposition, technological operating disposition, technological planning and reflecting disposition but no significant effect on the technological analyze disposition, technological problem identifying resolving disposition. Second, after participate in engineering-technology program, there was significant effect on the interests in engineering, the perceptions of creativity in engineering but no significant effect on the perceptions of importance in engineering.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.96-104
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The centers of fiducial marks are obtained by using moment, gradient method. The first method is calculating the centroid by using first moment of blob, and the latter method is calculating the center of the circle whose equation is obtained by curve-fitting the boundaries of fiducial mark. The operating system used to implement the whole set-up is carried in Window 98 (or NT) environment. Finally we implemented this system to PCB screen printer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.891-898
• /
• 2001

This paper develops a master manipulator which can reflect a force from a slave manipulator effectively. It many have a big workspace, can represent a human operators manipulation perfectly, and is composed of a position control part, an orientation control part and an end effector control part. This paper also develops a graphic simulator using the Visual C++ and OpenGL in the Window operating system. It can be used to make a virtual slave manipulator and set a virtual working environment, and provide a visual information from a desired view point. A virtual teleoperation system is developed by connecting the developed master manipulator to the graphic simulator using an interfacing hardware bilaterally. It is used for performing a virtual object exploration experiment. In the experiment, two virtual objects are used. They are virtual wall and virtual hexahedron which have 0.7N/mm and 2.2 N/mm stiffness respectively. The experiments are performed under six different working conditions. The experiment results will show the effectiveness of the reflected force from the slave manipulator for improving the efficiency and stability of the teleoperation task.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.319-327
• /
• 2011

An iterative technique based on orthogonal filters and frequency tracking is proposed to estimate harmonic components in power systems. The technique uses frequency interpolation to estimate fundamental frequency and harmonics when the nominal frequency of the signal is a non-integer value. Due to the number of computations involved during the generation of filter coefficients, an offline computation is suggested. Beneficial features of the proposed technique include fixed sampling rate and fixed data window size. The performance of the proposed technique is examined by simulating different power system operating conditions and evaluating the data from these simulations. A technique based on Fast Fourier Transform is also used to estimate the harmonic components for all the simulated signals. These estimates are compared with those obtained from the proposed technique. Results show that the proposed technique can converge to the accurate fundamental frequency and therefore, provide accurate harmonic components even when the fundamental frequency is not equal to the nominal frequency.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.423-426
• /
• 1999

In offering a statistical end-to-end bandwidth guarantee service, typically called Assured Service, in Differentiated Serviced (Diff-Serv) framework, the biggest issue is its inconsistency. Larger profile TCP flows fail to achieve the guaranteed rate when competing with many smaller profile flows. This phenomenon, which we call "bandwidth skew", stems from the fact that larger profile flows take longer time to recover from the congestion window size backoff after a packet drop. Proposed solutions to this problem, therefore, are focused on modifying the TCP behavior. However, TCP modification is not practicable, mainly due to its large installation base. We look to other mechanisms in the Diff-Serv framework to find more realistic solutions. In particular, we demonstrate that RIO, the de facto standard packet differentiation mechanism used for Assured Service, also contributes to the bandwidth skew. Based on this new finding, we design a modified RIO mechanism called RI+O. RI+O uses OUT queue length in addition to IN and IN+OUT queue length to calculate OUT packet drop probability. We show through extensive simulation that RI+O significantly alleviates the bandwidth skew, expanding the operating regime for Assured Service.d Service.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.23-27
• /
• 2002

Ocean pollution like as oil spill and red tide have occurred considerable and executing clean-up them. Rapid prediction of polluting area is necessary that efficiency clean-up. In this study, develop the program that clean-up worker could easy predict polluted area. This paper is introduced configuration and contents of ODM(oil diffusion modelling) which constructed with GUI(Graphic User Interface) system. ODM is consisted with pre, post and main process, and constructed on window process. So, clean-up worker easy operating program and confirm the result. Studying this program, the distribution of ocean pollutant and phase of ocean movement is shown without difficulty on a computer.

• Journal of Surface Science and Engineering
• /
• v.30 no.4
• /
• pp.223-230
• /
• 1997

Tungsten oxide and nickel oxide thin films were deposited onto ITO(Indium Tin Oxide) transparent glass by the E-beam evaporation and were used as a cathode and an anode for the EC(Electrochromic) smart window, respectively. Stoichiometric structures of the deposited films were investigated by the implementation of XPS(X-ray Photoelectron Spectroscopy) analysis and the results were $WO_{2.42}$ and $NiO_{0.44}$. This oxygen deficincy might affect affect the transparency of the thin films. The electrolyte for the EC smart windows was PAN-$LiCIO_4$ conducting polymer. EC(Ethylene Carbonate)and PC(Propylene Carbonate) were added as plasticizer to enhance ion conductivity. When the weight ratio of the EC : PC was 3 : 1, transmission difference and cycle life performance were tested. Polymer EC windows showed 40% $\Delta$T at 1.5V operating volage for 3,200 cycles. Structural degradation was observed by the SIMS(Secondary Ion Mass Spectroscopy) analysis and it was confirmed that structural degradation of polymer caused by the solvent evaporation was the main cause to degrade EC smart windows.

• Korean Journal of Clinical Pharmacy
• /
• v.29 no.4
• /
• pp.286-294
• /
• 2019

Background: At the end of the'Waste Drug Disposal Project', collection and disposal of waste drugs remain a social issue. Objective: This study aimed to provide suggestions to improve the drug waste management system in Korea by comparing domestic and overseas relevant programs. Methods: This is a comparative study between South Korea, Australia, Canada, France, and the US. These overseas countries were selected because they have been operating waste drug management programs continuously to date. Comparison was conducted by a pre-determined analysis frame including legal regulation, enforcement program and its performance. Results: All selected countries except Australia had legal regulations on drug wastes. The US had the largest variety of drug waste disposal methods. Canada had recommended that pharmacies actively participate in drug waste withdrawal programs. France had the largest variety of methods to promote relevant programs, including window sticker, SNS, and app, as well as the highest level of awareness and participation. Australia had the lowest level of awareness and participation in pharmaceutical waste management programs. Pharmaceutical companies took responsibility of paying for these programs in the selected overseas countries. Conclusion: Further efforts should be made to establish a clear guideline including the role of pharmaceutical companies, and to develop various methods for the public to be aware of appropriate ways of disposing drug wastes in Korea.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1055-1061
• /
• 2004

In this research, a vision system for detecting breakages of small-diameter taps, which are rarely detected by the indirect in-process monitoring methods such as acoustic emission, cutting torque and motor current, was developed. Two HMI (Human Machine Interface) programs to embed the developed vision system into a Siemens open architecture controller, 840D, were developed. They are placed in sub-windows of the main window of the 840D and can be activated or deactivated either by a softkey on the operating panel or the M code in the NC part program. In the event that any type of tool breakage is detected, the HMI program issues a command for an automatic tool change or sends an alarm signal to the NC kernel. An evaluation test in a high-speed tapping machine showed that the developed vision system was successful in detecting breakages of small-diameter taps up to M1.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.853-855
• /
• 1996

This paper describes the dissipation factor measuring techniques of insulating oil on the operating transformer by using digital signal processing. After applying voltage to the electrodes which is installed In a transformer, acquiring source voltage and current of electrodes and using cross-correlation techniques. we can check the dissipation factor of insulating oil. To Improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and analog filter and software such as cross-correlation techniques, rectangular window, and digital filtering techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by using computer simulation, and compared the simplified measuring devices with schering bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers.