• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
• /
• pp.196-201
• /
• 1995

The broadband and discrete sources of sound in small cooling fans of propeller type and centrifugal type were investigated to understand the turbulent vortex structures from many bladed fans using ANSI test plenum for small air-moving devices (AMDs). The noise measurement method uses the plenum as a test apparatus to determine the acoustic source spectral density function at each operating conditions similar to real engineering applications based on acoustic similarity laws. The characteristics of fans including the head rise vs. volumetric flow rate performance were measured using a performance test facility. The sound power spectrum is decomposed into two non-dimensional functions: an acoustic source spectral distribution function F(St,.phi.) and an acoustic system response function G(He,.phi.) where St, He, and .phi. are the Strouhal number, the Helmholtz number, and the volumetric flow rate coefficient, respectively. The autospectra of radiated noise measurements for the fan operating at several volumetric flow rates,.phi., are analyzed using acoustical similarity. The rotating stall in the small propeller fan with a bell-mouth guided is mainly due to a leading edge separation. It creates a blockage in the passage and the reduction in the flow rate. The sound power levels with respect to the rotational speeds were measured to reveal the mechanisms of stall and/or surge for different loading conditions and geometries, for example, fans installed with a impinging plate. Lee and Meecham (1993) studied the effect of the large-scale motions like impinging normally on a flat plate using Large-Eddy Simulation(LES) and Lighthill's analogy.[ASME Winter Annual Meeting 1993, 93-WA/NCA-22]. The dipole and quadrupole sources in the fans tested are shown closely related to the vortex structures involved using cross-correlations of the hot-wire and microphone signals.

• 한국소음진동공학회논문집
• /
• 제20권5호
• /
• pp.502-509
• /
• 2010

A test facility which can simultaneously measure turbocharger operating condition variables and vibro-acoustic emission in the situations that are quite similar to real internal combustion engine operating conditions has been introduced. Using this facility, a new method sweeping from full open throttle to deep surge region along constant speed curves can be utilized instead of the stationary method that has been traditionally used to obtain turbocharger compressor maps. Data covering an extensive range of the compressor performance map have been collected and analyzed. An experimental study is performed to define a noise diagram that correlates vibro-acoustic measurements to aerothermodynamic operating conditions. An instrumentation set in the facility allows the automatic definition of the operating point on the turbine and compressor map of the turbocharger. Also, radiated sound pressure and casing vibration data corresponding to the point are obtained by a microphone in the vicinity of the compressor casing and an accelerometer on the casing. The major source(s) of noise at specific operating point on the map can be easily identified with these maps. Also, acoustic characteristics of a given turbocharger at the vicinity of the surge as well as in the surge are also defined. Finally, the possibility to define mild surge region of a turbocharger using vibro-acoustic measurements is studied.

• 한국유체기계학회 논문집
• /
• 제9권6호
• /
• pp.54-62
• /
• 2006

An experiment about performance characteristics is conducted on a double chamber vane-type rotor. Three different rotors, which have 6, 8 and 9 vanes, are applied to the driver and various lift holes at the rear plate are used to increase the effective vane height. The inner diameter of a double chamber cylinder is ${\phi}27mm$, and the length of the cylinder is 65 mm. The maximum offset length between the rotor outer surface and the cylinder inner surface is 4.5 mm. In this study, specific output torques and powers are measured, and also noise and vibration are measured at the real operating situation. The operating torque on the double chamber is increased to 17% compared to the operating torque obtained at the single chamber which has the same size. The experimental results of noise and vibration show that the operating sound and vibration are directly related to the operating power generated by the double chamber rotor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1170-1179
• /
• 2009

본 연구의 목적은 수평축 풍력터빈인 NREL Phase VI를 대상으로 ANSYS FLUENT에서 제공하는 LES와 FW-H 상사식을 이용하여 풍력발전기로부터 방사되는 저주파 공력소음을 수치적으로 예측하는 것이다. 풍력발전기 공력소음에 관한 어떠한 실험적 자료가 존재하지 않으므로, 먼저 정격풍속에서 토크와 출력 등의 공력성능 수치결과를 실험결과와 비교하여 소음원 예측의 타당성을 검증한 후, 풍속 변화에 따른 공력소음 특성을 분석하였다. 그 결과 수치성능결과는 약0.8%이내에서 실험결과와 잘 일치하였다. 풍속이 증가함에 따라 사극자와 이극자에 의한 총음압레벨은 증가하는 경향을 나타내었다. 또한 풍력터빈 허브중심으로부터 거리가 증가함에 따라 원방에서는 $r^{-1}$, 근방에서는 $r^{-2}$에 비례하여 증가하는 것으로 나타났다. 그리고 거리가 두배 증가함에 따른 총음압레벨은 약 6dB 감소하였다.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.59-64
• /
• 2018

PURPOSES : We propose a parameter-setting-free harmony-search (PSF-HS) algorithm to determine the individual sound power levels of noise sources in the cases of industrial or road noise environment. METHODS :In terms of using methods, we use PSF-HS algorithm because the optimization parameters cannot be fixed through finding the global minimum. RESULTS:We found that the main advantage of the PSF-HS heuristic algorithm is its ability to find the best global solution of individual sound power levels through a nonlinear complex function, even though the parameters of the original harmony-search (HS) algorithm are not fixed. In an industrial and road environment, high noise exposure is harmful, and can cause nonauditory effects that endanger worker and passenger safety. This study proposes the PSF-HS algorithm for determining the PWL of an individual machine (or vehicle), which is a useful technique for industrial (or road) engineers to identify the dominant noise source in the workplace (or road field testing case). CONCLUSIONS : This study focuses on providing an efficient method to determine sound power levels (PWLs) and the dominant noise source while multiple machines (or vehicles) are operating, for comparison with the results of previous research. This paper can extend the state-of-the-art in a heuristic search algorithm to determine the individual PWLs of machines as well as loud machines (or vehicles), based on the parameter-setting-free harmony-search (PSF-HS) algorithm. This algorithm can be applied into determining the dominant noise sources of several vehicles in the cases of road cross sections and congested housing complex.

• 한국인터넷방송통신학회논문지
• /
• 제17권6호
• /
• pp.137-143
• /
• 2017

횡단보도와 교차로에서 시각 장애인을 위한 보행 안전시설은 부족하다. 시각 장애인을 위해 인도에 점자 블록이 설치되고 교차로에 RF 원격 제어 시스템으로 제어되는 신호등과 음향 신호기가 설치되어 있다. RF 원격 제어 시스템은 하나의 주파수를 사용하여 교차로에서 인접한 신호등과 음향 발생기들을 동시에 동작시키는 문제가 있다. 본 논문은 비콘을 사용하여 교차로에 설치된 시각 장애인을 위한 신호등과 음향 신호기를 식별하고 진행 방향의 신호등과 음향 신호기를 적외선 통신으로 동작시키는 스마트 지팡이를 개발하였다. 본 논문에서 개발한 스마트 지팡이는 블루투스 통신을 통해 모바일 앱과 연동하여 시각 장애인을 위한 보행자 내비게이션을 제공 할 수 있다.

• 한국유체기계학회 논문집
• /
• 제7권1호
• /
• pp.17-23
• /
• 2004

Aeroacoustic characteristics of sirocco fan used in Over-The-Range (OTR) has been analyzed in this paper. A microwave hood combination over the gas range is short for the OTR. The flow phenomena of the double-sided sirocco fan was analyzed numerically and experimentally by using commercial code and three dimensional PIV for flow visualization. Also, microphone array is used in order to understand acoustic characteristics of OTR. Two dimensional unsteady flow and acoustic simulation is tried to qualitatively estimate the effects of tonal noise and broadband noise on the overall sound pressure level. It is found that tonal sound is generated from the strong interaction between the impeller and cutoff while broadband sound is generated from the strong secondary flows along the scroll surface. To reduce the noise level, the V-shape cut-off was applied to improve the sound quality by reducing tonal noise. So the peak noise at BPF (Blade Passing Frequency) was almost reduced. The shape of flow-guide to suppress the secondary flow over the scroll surface was carefully checked. It is found that this affects flow pattern at the fan exit and reduces the broad band noise. Through this numerical and experimental study, the sound pressure level was lowered by 4dBA compared to that of the previous fan at the operating point.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.121-129
• /
• 2016

The noise pattern of a household refrigerator is dependent on the characteristics of its operating cycle which is repeated with a specific pattern depending on various parameters, such as room temperature and performance of its mechanical parts. Analysis of noise pattern is essential prior to evaluation of sound quality of a refrigerator. In this study, 14 units of refrigerator were classified into 4 types according to noise pattern and sort of mechanical part, which helps to analyze characteristics of refrigerator noise. Sound quality metrics(loudness, sharpness, roughness, and fluctuation strength) were calculated to compare noise pattern of the 4 types of refrigerator. The results of this study can be useful to decide noise performance of refrigerator.

• 전자공학회논문지SC
• /
• 제49권3호
• /
• pp.69-74
• /
• 2012

본 논문에서는 국방기술을 활용하여 전투병사의 귀를 폭음으로부터 보호하면서도 상호 교신의 어려움을 최소화하는 야전형 디지털 보청기에 관해 연구한 결과를 보여준다. 보청기는 작은 소리를 증폭하기도 하지만 급격하게 커지는 폭음은 오히려 감쇠시킬 수 있는 신호의 압축이 보편화되어 있다. 이를 전투 병사의 귀에 활용하면 그들의 귀를 보호하게 된다. 디지털 보청기의 개발 과정은 핵심 부품인 DSP IC 칩이 개선되어 새로이 출시되면, 그에 대응해서 새로운 칩에 맞는 펌웨어와 휘팅 소프트웨어를 개발하면 된다. 최근에 캐나다 DSP Factory에서 설계 출시된 Ezairo 5910칩을 가지고 현재 연구되는 보청기 펌웨어 개발의 일부를 소개하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.189-195
• /
• 2003

This paper represents an identification procedure for leading mechanism of a car A/V system which is composed of a DC motor and a set of plastic gears. In addition, we studied dominant noise source of rattle noise generated by external forced vibration as a car drives. we made a dynamometer to produce stationary operation on loading mechanism of A/V system because noise generated by actual loading mechanism is non-stationary signal. operating the dynamometer setup at various motor speeds, sound pressure spectra are measured and the results are analyzed. its dominant noise source is also identified by using a sound Intensity technique. we made use of multi-dimensional spectral analysis to rind a dominant rattle noise. this method is so useful to eliminate coherence between vibration sources and helps us obtain coherent output spectrum of individual vibration source which make a rattle noise.