• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.945-953
• /
• 2006

Though a fully thermally coupled distillation column consumes less energy than an original column, it is not widely implemented in practice due to its operational difficulty. A new fully thermally coupled distillation column is proposed for the operability improvement, and its performance is investigated. The main improvement is the separation of a main column to give an upper and lower columns and the installation of an intermediate heat exchanger between them to regulate the fluctuation of product compositions. A proper manipulation of column pressure in the separated main columns made easy vapor flow without a compressor. The operability improvement is examined in a hexane process from the dynamic simulation using a commercial design software HYSYS. The simulation results indicate that the coupling among inputs and outputs is loosened to make easy manipulation of product compositions in the proposed distillation system.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.644-651
• /
• 2001

The purpose of this study is to develop the improvement method of MOV(Motor Operated Valve) operability without major modification or change of MOV which needs a great expense and manpower. We studied valve stem lubrication, stem packing thrust and actuator control switch which could give an major effect to MOV operability, and found the some consequences. First, the stem/stem-nut friction coefficient and stem factor is significantly effected by stem lubrication state. Second, the measured packing thrust value is appeared higer than the design value for tested valves and the preparation of optimal value selection criteria is needed. Finally, optimization of MOV control switch is another major factor for MOV operability and structual integrity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1197-1201
• /
• 2006

In order to improve the operability in a fully thermally coupled distillation column the main column is separated into an upper and a lower column, and its design method is explained. With a distillation experiment using a two-inch column the operability of the proposed column is examined. Readily available methanol, ethanol and propanol are used as the feed, and the experimental result is compared with that of the HYSYS simulation. It is found from the experiment that the recovery ranges between 58.8% and 68% and the distillation efficiency is lower than that of the simulation. consumes less energy than an original column, it is not widely implemented in practice due to its operational difficulty. However, it is proved that the proposed distillation column can be operated without compressors and it can be practically utilized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.774-780
• /
• 2021

The auxiliary power unit (APU) of a rotorcraft starts the engine during operation/flying. The APU is composed of a gas turbine engine type. The starting principle of the component is that the electric start motor generates the power required for starting by rotating the shaft. In this study, quality improvement was performed by applying an over-running clutch (ORC) between the APU and the starter motor to secure the operability of the starter motor of the APU mounted on the rotorcraft. The starter motor has the main role of starting the APU, but during operation, it is rotated without load by the rotational force of the APU gear shaft, resulting in friction at the brush. This phenomenon causes abrasion of the brush of the starter motor. Consequently, when the APU operation time increases, the brush life decreases, and the operability of the APU is affected. In this study, an ORC that separates the interlocking between the start motor brush abrasion and the APU operation time was applied to improve the operability/durability of the APU starter motor. The effect was verified through a test, and the technical feasibility of the design change was analyzed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.225-226
• /
• 2022

In order to secure the practicality of services using drones, improve on-site operability, and improve the convenience of aircraft maintenance, it is necessary to develop a drone station that can be safely stored while ensuring charging performance. Therefore, a total seven points of improvement were derived through laboratory experiments after the development of the first prototype, and an improved second prototype will be developed in the future based on the preceding processes.

• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.615-625
• /
• 2009

Worldwide inter-operability for microwave access (WiMAX) is a promising technology that provides high data throughput with low delays for various user types and modes of operation. While much research had been conducted on physical and MAC layers, little attention has been paid to a comprehensive and efficient security solution for WiMAX. We propose a hybrid security solution combining identity-based cryptography (IBC) and certificate based approaches. We provide detailed message exchange steps in order to achieve a complete security that addresses the various kind of threats identified in previous research. While attaining this goal, efficient fusion of both techniques resulted in a 53% bandwidth improvement compared to the standard's approach, PKMv2. Also, in this hybrid approach, we have clarified the key revocation procedures and key lifetimes. Consequently, to the best of knowledge our approach is the first work that unites the advantages of both techniques for improved security while maintaining the low overhead forWiMAX.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.6
• /
• pp.753-763
• /
• 1999

The existing SCADA(Supervisory Control and Data Acquisition) system software is usually developed to suitable for the specific hardware platforms. However, as per rapid improvement of computer performance and development of network technology, it is required to support scalability and inter-operability in existing different SCADA systems. In order to meet such requirements, in this paper, we propose a new type of SCADA testbed using Java for electric distribution applications. The system consists of three modules; development support tools, client and server modules. The basic architecture of the proposed SCADA system is similar to existing one, however, we improve the function of MTU and MMI interface to facilitate LAN and WAN environment. Also, the proposed system can deals with alarm and history data by using heterogeneous DBMS. Since the system is built in Java environment, the development cost is cheap and it can support sacalability and portability. Our experience can be utilized to develop next generation of small and medium size of SCADA system.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.391-402
• /
• 2021

Purpose: By categorizing opinions by subject in the safety certification ecosystem, we want to identify weaknesses in system operation and suggest improvement plans so that the safety certification system can have quick resilience against future variability. Method: Through literature research and data analysis, similar domestic and foreign safety certifications and related cases, as well as the current status of international standards and national standards, etc. were confirmed, and a fact-finding survey was conducted for each stakeholder in the safety certification ecosystem, and problem types and improvement measures were established. Result: We conduct a fact-finding survey of the overall system, such as quality satisfaction with safety certification target products, obstacles in the development, manufacturing and use process, and safety certification-related improvements, targeting workplaces that manufacture, import or use safety certification target machines By discovering and categorizing problems and weaknesses in system operation, detailed implementation tasks were derived to establish improvement directions and improve operability. Conclusion: For the advancement and internationalization of the safety certification system, it is necessary to efficiently carry out the detailed promotion tasks derived from this study. In addition, in order to strengthen the resilience to the variability of the safety certification ecosystem, the operating system of a virtuous cycle structure by improving the mutual relationship between each subject construction is considered important.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.31-41
• /
• 2010

So far, many simulation researches associated with naval ships have been concentrated on the tactical systems and naval ship development. However, studies on the improvement of living conditions for naval ship crews were limited. This study targets a crew mess room which is a typical welfare facility in naval ships and existing modeling and simulation methodologies for naval tactical and strategic systems cannot be applied to the crew room simulations. This paper suggests a simulation modeling framework based on 3-dimensional discrete event simulation methodology for crew mess room congestion assessment and operation scenarios. The simulation modeling framework is verified through practical case simulations. The purpose of simulation modeling framework consists of process and system architecture for operation feasibility tests of welfare facilities in naval ships and is to guide an assessment of the operability performance of a crew mess room.

• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.4
• /
• pp.155-162
• /
• 2023

PURPOSE: The primary objective of this study was to develop a virtual reality-based vestibular rehabilitation system to enhance balance perception, target rehabilitation specialists, and evaluate its usability. A key goal was establishing a system refinement strategy based on the collected data. METHODS: We conducted a study involving ten adults aged 10 to 29 in Gwangju Metropolitan City to evaluate the usability of a virtual reality-based vestibular rehabilitation system to enhance balance perception. After introducing the product and explaining its use to the participants, balance assessments and training were conducted using computerized dynamic posturography (CDP) (also called the test of balance [TOB]). Subsequently, participants were given a questionnaire to evaluate subjective stability, operability, and satisfaction. Frequency analysis was utilized to determine the frequency of the variable values of the measurement items in the survey for descriptive statistics. RESULTS: We found that the average usability score was 2.587. When broken down by category, stability received an average rating of 2.725, operability scored an average of 2.783, and satisfaction averaged 2.454. These findings suggest that most participants experienced positive sentiments and considerable satisfaction. CONCLUSION: The study successfully developed a virtual reality-based vestibular rehabilitation system, which was an improvement over the previous model and addressed its shortcomings. The results show that users with vestibular impairments are satisfied and more engaged with this system, indicating that additional studies are warranted.