• The Korean Journal of Physiology and Pharmacology
• /
• v.10 no.2
• /
• pp.71-77
• /
• 2006

The goal of this study was to analyze the effects of genistein, a widely used tyrosine kinase inhibitor, on cloned Shaw-type $K^+$ currents, Kv3.1 which were stably expressed in Chinese hamster ovary (CHO) cells, using the whole-cell configuration of patch-clamp techniques. In whole-cell recordings, genistein at external concentrations from 10 to $100{\mu}M$ accelerated the rate of inactivation of Kv3.1 currents, thereby concentration-dependently reducing the current at the end of depolarizing pulse with an $IC_{50}$ value of $15.71{\pm}0.67{\mu}M$ and a Hill coefficient of $3.28{\pm}0.35$ (n=5). The time constant of activation at a 300 ms depolarizing test pulses from -80 mV to +40 mV was $1.01{\pm}0.04$ ms and $0.90{\pm}0.05$ ms (n=9) under control conditions and in the presence of $20{\mu}M$ genistein, respectively, indicating that the activation kinetics was not significantly modified by genistein. Genistein $(20{\mu}M)$ slowed the deactivation of the tail current elicited upon repolarization to -40 mV, thus inducing a crossover phenomenon. These results suggest that drug unbinding is required before Kv3.1 channels can close. Genistein-induced block was voltage-dependent, increasing in the voltage range $(-20\'mV{\sim}0\'mV)$ for channel opening, suggesting an open channel interaction. Genistein $(20{\mu}M)$ produced use-dependent block of Kv3.1 at a stimulation frequency of 1 Hz. The voltage dependence of steady-state inactivation of Kv3.1 was not changed by $20{\mu}M$ genistein. Our results indicate that genistein blocks directly Kv3.1 currents in concentration-, voltage-, time-dependent manners and the action of genistein on Kv3.1 is independent of tyrosine kinase inhibition.

• Smart Media Journal
• /
• v.5 no.3
• /
• pp.17-24
• /
• 2016

Korean agriculture is currently experiencing difficulties as a cause of rural depopulation, aging of rural population, grain self-sufficiency rate decline, and deepening of climate change. It is necessary to ensure our country's agriculture industrial competitiveness in accordance with opening of FTA imports expanded. To ensure the underdeveloped competitive, Korean government defines the 3rd generation model from 1st generation model to extend the smart farms of Korean types. The agriculture smarting overcomes the growth limitations of agriculture, and efforts to develop 6th + ${\alpha}$ industry. In this paper, We define and verify the IoF(Internet of Farming)-Cloud based substantial services about 2rd generation model, and propose a greenhouse of IoF-Cloud testbed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1519-1526
• /
• 2013

This study reviewed the capturing performance of a canopy hood used in some melting processes of a casting manufacturing factory through a site survey. In addition, this study compared and evaluated the flow field and pressure field for the plans to enhance the hazardous air pollutants collection capacity by using CFD model. The case-2(flange attached + double hood) can be improved in terms of collection performance, but is expected to increase in hood static pressure by about 70% more than the existing structure, so it was shown that its site applicability is not good. It is judged that the shape of case-3(flange attached + double cone attached) is most suitable to improve the suction efficiency. This is because a double cone is installed at the center of the opening to concentrate the flow rate on the edge of the hood and control the hume rising to the center of the hood without a static pressure rise via the slope of the cone.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.232-238
• /
• 2004

MPEG-PCL diblock copolymers consisting of methoxy poly(ethylene glycol) (MPEG) and $\varepsilon$-caprolactone (CL) as drug carriers were synthesized by ring-opening polymerization MPEG-PCL diblock copolymers were characterized by X-ray diffraction and differential scanning calorimetry. After freeze milling of block copolymers and albumin bovine-fluorescein isothiocyanate (FITC-BSA) as model protein, the wafers loaded FITC-BSA were fabricated by direct compression method. The release profiles of FITC-BSA were examined using pH 7.4 PBS for 14 days at 37$^{\circ}C$. The release amount was determined by fluorescence intensity by using the fluorescence spectrophotometer. The morphological change of wafers was observed by digital camera and scanning electron microscope. The release rate and initial burst of BSA increased with increasing PEG molecular weights and decreasing PCL molecular weights in the segments of MPEG -PCL diblock copolymers.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.218-222
• /
• 2018

An oxide-dispersion-strengthened (ODS) layer was formed on Zircaloy-4 tubes by a laser beam scanning process to increase mechanical strength. Laser beam was used to scan the yttrium oxide ($Y_2O_3$)-coated Zircaloy-4 tube to induce the penetration of $Y_2O_3$ particles into Zircaloy-4. Laser surface treatment resulted in the formation of an ODS layer as well as microstructural phase transformation at the surface of the tube. The mechanical strength of Zircaloy-4 increased with the formation of the ODS layer. The ring-tensile strength of Zircaloy-4 increased from 790 to 870 MPa at room temperature, from 500 to 575 MPa at $380^{\circ}C$, and from 385 to 470 MPa at $500^{\circ}C$. Strengthening became more effective as the test temperature increased. It was noted that brittle fracture occurred at room temperature, which was not observed at elevated temperatures. Resistance to dynamic high-temperature bursting improved. The burst temperature increased from 760 to $830^{\circ}C$ at a heating rate of $5^{\circ}C/s$ and internal pressure of 8.3 MPa. The burst opening was also smaller than those in fresh Zircaloy-4 tubes. This method is expected to enhance the safety of Zr fuel cladding tubes owing to the improvement of their mechanical properties.

• Archives of Craniofacial Surgery
• /
• v.12 no.1
• /
• pp.33-36
• /
• 2011

Background: In a frontal sinus reconstruction, the literature primarily recommends a surgical approach for definite treatment with the exception of for anterior wall fractures with no dislocation. Many studies have assessed a range of methods for the reduction of frontal sinus fractures. This paper presents a case, in whom the anterior wall of the frontal sinus was reconstructed using an outer table calvarial bone graft in an en bloc manner. Patient and methods: A 36-year-old male visited the emergency room with a heavy injury to the forehead. He was diagnosed with fractures of the anterior and posterior wall of the frontal sinus. The neurosurgeon removed the fractured area and repaired the meninges. Afterwards, cranialization was performed and the opening of the nasofrontal duct was obstructed. After fixing the removed bone to its original location, all fragments of fractured anterior wall were purged out and the anterior wall reconstructed using an en bloc calvarial bone graft. Results: In the post-operative 8 months period, there were no complications, the round contour of the forehead was expressed well and the patient was satisfied with the result. Conclusion: There are many methods for reconstructing the anterior wall of the frontal sinus. On the other hand, in cases of large fracture sites with many fractured bone fragments, en bloc harvesting of the outer table calvarial bone could be a better choice than making use of only plates and screws because this method shows a good results in terms of aesthetics with a low complication rate.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.1-24
• /
• 2007

With its foreign trade rapidly expanding and with economic growth continuing at a substantial rate, China has become the largest container traffic generating country in the world. And with trend of container ships becoming larger and faster, the environment surrounding ports in North-East Asia are rapidly changing. The Yangsan, offshore port for Shanghai, being developed on the islands of Da Yangsan and Xiao Yangsan, some 30km offshore, and connected to the mainland by the six-lane highway Donghai bridge, opened phase one in late 2005 and phase two in 2006 respectively and will have 29 berths by 2012 and be able to handle 15 million TEU. The Port of Shanghai which passed Busan in terms of container volume further consolidated its position as the world's No. 3 port with an annual volume of 21.7 million TEU in 2006 and is likely to have emerged as the biggest container port in the world. The Port of Busan, the world's fifth largest container port, wants to survive as regional hub port. In this circumstance, the strategies of the Port of Busan should be established.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.1
• /
• pp.15-20
• /
• 2019

Objectives: The aim of this study was to use four sets of success criteria to evaluate the outcomes of arthrocentesis treatment with hyaluronic acid injection in patients with internal derangement (ID) of the temporomandibular joint (TMJ). Materials and Methods: The study included 40 patients diagnosed with unilateral Wilkes stage III TMJ dysfunction. Clinical parameters, including maximum mouth opening (MMO) and pain during function, were evaluated preoperatively, 6 months, and 1 year after TMJ arthrocentesis. Outcomes were assessed and compared using four sets of success criteria from the following: the American Association of Oral and Maxillofacial Surgeons (AAOMS; MMO ${\geq}35mm$ and visual analogue scale [VAS] score ${\leq}3$), Murakami et al.'s criteria (MMO >38 mm and VAS score <2), Emshoff and Rudisch criteria (MMO ${\geq}35mm$ and >50% pain reduction), and patient self-reports (self-evaluation of treatment as successful or unsuccessful). Results: Significant improvements in MMO and pain reduction during function were observed between the preoperative period and 6 months and 1 year postoperatively (P<0.01). The success rates of treatment determined using AAOMS (52.5%), Emshoff and Rudisch criteria (57.5%), and self-reported patient criteria (40.0%) were similar. Application of the Murakami et al. criteria reported the lowest success rate (12.5%). Conclusion: The AAOMS and Emshoff and Rudisch criteria are consistent with patient expectations and can be used to assess treatment efficacy.

• The Korean Journal of Emergency Medical Services
• /
• v.22 no.3
• /
• pp.35-45
• /
• 2018

Purpose: The purpose of this study was to compare laryngoscopic views and ease of use and success of intubation, via the percentage of glottic opening (POGO) scale when using the Miller blade and Macintosh blade in paraglossal approach. Methods: Forty intern doctors were randomized for laryngoscopy to be performed in a crossover manner. They performed endotracheal intubation with Miller blade and Macintosh blade in two airway scenarios: normal airway and difficult airway with edema. We observed the rate of successful intubation, time required for visualizing the glottis, time to complete endotracheal intubation, ease of intubation, and the POGO scale. Results: In the normal airway, there was no difference in intubation between the two endoscopes. In the difficult airway, the time for visualizing the glottis (7.80 versus 10.24 sec; p=.006), the time to tube passage (19.38 versus 23.03 sec; p=.038) and the time to complete endotracheal intubation (21.84 versus 28.54 sec; p=.022) with Miller blade was shorter than with Macintosh blade. The POGO scale(%) of the Miller blade was higher than that of the Macintosh blade's (62.25 versus 56.32; p=.030). Conclusion: Compared to the Macintosh blade, Miller blade provided better visualization of the glottis and POGO scale, and faster time to completion of endotracheal intubation.

• Korean Medical Education Review
• /
• v.21 no.1
• /
• pp.41-50
• /
• 2019

The aim of this study is to analyze the current status and performance evaluation systems of faculty in Korean medical colleges and professional graduate medical schools (called medical schools). We developed a research tool based on previous studies and distributed it to 40 medical schools from July to October 2017. The response rate was 100%. We calculated the number of faculty members and analyzed the faculty evaluation systems and awareness according to national and private medical schools. As of 2017, the number of medical faculty in Korea was 11,111 (4,973 faculty were employed by their alma mater, which is 44.76% of the total), with non-medical doctor faculty accounting for 754 of the total. The medical schools reflect research achievements as most important for re-appointment and screening to promote faculty, and the area of education is secondary excepting clinical faculty of private medical schools. However, important issues in the faculty evaluation deal with the relevance of research achievement and the need for qualitative assessment. Some medical schools revised or have been revising the faculty evaluation system in areas such as minimum standards of education for promotion and separation of promotion and tenure review. Opening non-tenure track lines for faculty show positive effects such as increasing the number of positions for hire and easing the financial burdens of medical schools. Downfalls include inconsistencies between the responsibilities and actual practices of tenure not being available and the instability of faculty's status. In conclusion, medical schools need to prepare a faculty evaluation system that fits the position of faculty members and attempt to establish a reasonable compensation system.