• 유공압시스템학회논문집
• /
• 제2권1호
• /
• pp.9-14
• /
• 2005

Hydraulic excavators have been popular devices in construction field because of its multi-workings and economic efficiency. The mathematical models of excavators have many nonlinearities because of nonlinear opening characteristics and dead zone of main control valve, oil temperature variation, etc. The objective of this paper is to develop a simulator for hydraulic excavator using AMESim. Components and whole circuit are expressed graphically. Parameters and nonlinear characteristics are inputted in text style. The simulator can be used to forecast excavator behavior when new components, new mechanical attachments, hydraulic circuit changes, and new control algorithm are applied. The simulator could be a kind of development platform for various new excavators.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.529-531
• /
• 2005

This paper proposes a compact pulse generator fur NOx removal application for diesel automotive. The rising time is important factor to increase NOx removal efficiency in pulsed corona discharge method. Manufacturing cost and compactness of the pulse power generator should be satisfied for automotive application. The proposed pulse power uses a low voltage thyristor, a pulse transformer with the function of saturated magnetic switch, and series connected general diodes as opening switch to satisfy that requirements. With 200 resistor load, the experiment results show that the output voltage is 21kV, the rising time is about 21ns, and the pulse width (FWHM) is about 42ns.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3001-3006
• /
• 2008

Recently, the internal combustion engines have focused on reducing both the CO2 emissions in order to cope with severe regulations for greenhouse effect. Therefore, various new technologies have been developed in many countries. Among them, the cooling system is spotlighted because it has great effect on fuel efficiency. However, the present engine cooling system is almost same as one of the 50 years ago. The needs for high performance and compact size make it important to improve engine cooling system, down-sizing and control method of coolant flow. Thus, low fuel consumption technology such as control and synthetic management of cooling system was necessary to satisfy with these needs. In this study, we applied electric thermostat to improve the fuel economy. The fuel consumption was compared after driving FTP-75 mode on both conditions which were with a conventional wax thermostat and with a electric thermostat. The coolant temperature of opening the electric thermostat is higher.

• 대한화학회지
• /
• 제60권4호
• /
• pp.257-260
• /
• 2016

A new perfluorobutyl substituted cyclic type disodium alkanesulfonate is designed, synthesized and characterized as alternative substance to perfluorooctane sulfonic acid (PFOS, 1), a well-known surfactant. Cylic type sulfonate was accomplished from commercially available 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol in four steps. Bio-degradable perfluorobutyl moiety was introduced from fluorous diol, which is symmetrically substituted amphiphile via installation of an intermediate trifluoromethanesulfonyl ester and easily manipulated by double displacement of triflate using potassium malonate and further reduction followed by nucleophilic ring opening are key reactions to get target disodium alkanesulfonate. The efficiency and simplicity in the synthesis of this material offer a new strategy to design PFOS alternatives.

• Advances in Energy Research
• /
• 제3권1호
• /
• pp.45-57
• /
• 2015

This article is addressed to define a new composite electrode constituted by porous nickel and an array of highly ordered $TiO_2$ nanotubes obtained by a previous galvanostatic anodization treatment in an ethylene glycol solution. The electrochemical performances of the composite anode were evaluated in a photo-electrolyser, which showed good solar conversion efficiency with respect to the UV irradiance together with a reduction of energy consumption. Such a combination of materials makes our system simple and able to work both in dark and under solar light exposure, thus opening new perspectives for industrial-scale applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.227-229
• /
• 2001

In recent years, studies on virtual reality and web 3D have been progressed and got a eye-opening progress in the field. In this paper, to improve a process of In-Service Inspection work for a nuclear power plant, we developed a virtual ISI DB management system by using virtual reality technology. This management system provides a high degree of efficiency for In-Service Inspection process and makes inspectors comfortable in web environment. This paper will be hope to activate a introduction of VR technology to the domestic industry.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.575-580
• /
• 2013

This study focused on the identification of sound characteristics according to the configuration of sound absorption material and perforated panel dimensions. Noise barriers consist of front perforated panel, sound absorption material and back plate. Noise barriers' acoustic performance should be required to meet the NRC of 0.7. The absorbing performance of the noise barrier relies on the opening ratio of perforated panel and the efficiency of the absorbing material. This study try to find out the possibilities of applications to railway usage.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권1호
• /
• pp.205-215
• /
• 2006

본 연구는 3차원 쉘요소를 이용한 유한요소해석을 통해 다이아프램으로 보강된 곡선 강박스거더교의 거동을 분석하였다. 매개변수연구를 통해 기존의 제안식과 비교함으로써 모델링의 타당성을 검증하였고, 뒤틀림 응력에 크게 영향을 미치는 인자는 중심내각, 지간길이, 다이아프램간격임을 확인하였다. 또한, 다이아프램의 간격, 개구율, 형상을 변수로 하여 해석한 결과에서는 지간이 30m, 곡률 반경이 40m인 해석모델에 대한 적정 다이아프램간격은 5m인 것으로 나타났다. 다이아프램의 형상 효과에 대해서는 라멘식 다이아프램의 경우가 개구율 0.4~0.6의 범위에서 개구부가 없는 충복판식 다이아프램보다 휨과 뒤틀림의 응력비가 낮아 거동에 유리한 것으로 나타났으며, 충복판식 다이아프램과 X형 트러스 방식의 다이아프램 비교에서는 동일한 강성을 가지더라도 충복판식 다이아프램이 뒤틀림응력을 보다 효과적으로 제어하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.731-736
• /
• 2011

우주발사체 추진기관 공급계에서 공압구동용 솔레노이드밸브는 제어시시템의 명령이 주어지면 구동가스 배관의 통로를 개폐해서 공압제어장치를 작동시킨다. 공압구동용 솔레노이드밸브의 제작에 앞서 설계검증 및 기본적인 작동특성을 분석하기 위해 AMESim 상용코드를 이용하여 해석모델을 수립하였다. 입구압력에 따른 작동시간을 시험결과와 비교하여 모델을 검증하였고 내부유동 해석결과 (FLUENT)를 이용하여 3차원 형상을 고려하여 모델의 정확도를 높였다. 밸브모델을 이용하여 다양한 설계변수에 따른 밸브의 개폐압력, 작동시간을 계산하여 설계인자 검증 및 작동성능을 분석하였다. 설계변수인 컨트롤밸브의 시트 형상, 주 밸브와 배출밸브의 시트 형상, 실링 직경비, 컨트롤 캐비티부피에 대해 밸브의 동특성 해석을 수행하였다. 해석을 통해 밸브 개폐작동시간, 작동성능, 개방압력을 예상하였다. 본 연구 결과는 한국형발사체 공급계 공압구동용 솔레노이드밸브의 설계/해석능력을 확보하고 밸브의 개발과정에서 효율성을 높일 수 있으며 파생형 밸브의 설계 및 선행연구에 적용할 수 있을 것으로 판단된다.

• 한국유통학회지:유통연구
• /
• 제2권2호
• /
• pp.153-172
• /
• 1997

The distribution sector is affected by a wide range of regulations. Many of these are related to health and safety, others are related to urban planning and environmental issues, whereas some mainly have an economic basis. But, regulations many be unduly restrictive, in which case they can drive up costs and ultimately prices, or they may, in some cases, reduce consumer choice. Unduly restrictive regulations could also increase costs indirectly, by reducing competition and thus lead to lower productivity growth. In the past few years, distribution sector has gone through drastic changes due to deregulation and market opening. Implementation of regulatory reforms served as an opportunity to change laws and systems which had been an obstacle to development of distribution sector. Market opening of distribution sector became a turning point to promote competition among domestic and foreign firms. However, for small and medium scale of the typical retail enterprises which were in no position to compete in terms of prices, additional facilities, and services, faced a threat of diminished trading area, and even of their existence. Because, large firms may have greater market power than small firms, as they can more easily extract favorable terms when procuring goods, and may also be able to deter entry by advertising outlays or access to the best sites. In addition, larger chain stores armied with sufficient capital dominated trading area and reduced customer's welfare by abusing their monopoly power when competing with other shops, and are often cited as an example of adverse effects of local monopoly. In order to minimize such adverse effects and to foster competition, regulatory reforms in distribution sector should set its goal to promote sound and stable distribution activities through market principle and restoring competition principle, and ultimately to boost customers welfare. Therefore, deregulation in distribution sector should be implemented in a way to promote customers welfare, eliminate entry barriers, and expand competition principle such as productivity and efficiency competition. However, it should be also recognized that deregulation of system alone is not enough to develop the distribution sector. To compete in a increasingly concentrated industry, small enterprises increasingly engage in co-operative arrangements, such as buying groups, strategic alliances or franchise agreements.