• Steel and Composite Structures
• /
• 제28권5호
• /
• pp.617-628
• /
• 2018

Steel shear wall possesses priority over many of the current lateral load-bearing systems due to reasons like higher elastic stiffness, desirable ductility and energy absorption, convenience in construction and implementation technology, and economic criteria. Besides these advantages, this system causes increase in the dimensions of other structural elements due to its high stiffness as one of its intrinsic characteristics. One of the methods for stiffness reduction is perforating the wall panel and creating openings in the wall that can also be used as windows or ducts in buildings service period. The aim of the present study is probing the appropriate geometric shape and location of opening to fulfil economic criterion plus technical and seismic design criteria. In the present research, a number of possible while reasonable opening shapes and locations are defined in various sizes for some steel shear wall specimens. The specimens are modelled in ABAQUS finite elements software and analyzed using nonlinear pushover analysis. Finally, the analyses' results are reported as force-displacement diagrams and the strength, the initial stiffness and the energy absorption are calculated for all specimens and compared together. The obtained results show that both shape and location of the openings affect the seismic parameters of the shear wall. The specimens in which the openings are further from the center and closer to the columns possess higher stiffness and strength while the specimens in which the openings are closer to the center show more considerable changes in their seismic parameters in response to increase in opening area.

• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.253-258
• /
• 2016

입자강화복합재료를 이용하여 쐐기분열시험으로부터 얻은 파괴에너지, 균열진전 및 CTOD 에 대한 온도의 영향이 조사되었다. 이용된 재료는 고분자바인더, 산화제 및 알루미늄입자로 이루어져 있으며, 쐐기분열시편의 시험 속도는 50 mm/min 이고, 온도 조건은 $50^{\circ}C$, 상온, $-40^{\circ}C$, $-60^{\circ}C$이었다. 분열하중-CMOD 로부터 구한 파괴에너지는 $50^{\circ}C$에서 $-40^{\circ}C$까지 온도의 감소와 함께 증가한다. 또한 $-60^{\circ}C$에서 입자강화복합재료의 강도는 유리전이온도에 의해 급격히 증가하며 취성거동을 보였다. 그리고 디지털 이미지 상관법을 이용하여 균열 선단부근에 대한 변형률장이 분석되었다.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.511-525
• /
• 2024

Underground openings significantly affect the mechanical stability of underground spaces and create damaged zones. This study investigated the acoustic emission (AE) characteristics associated with the formation of damaged zones around circular openings. Uniaxial compression experiments were conducted on three types of rock specimens, namely, granite (GN-1 and GN-2), gabbro (GB), and slate (SL), containing a circular opening. AE and digital image correlation (DIC) techniques were used to monitor and evaluate the damaged zones near the circular openings. The AE characteristics were evaluated using AE parameters, including count, energy, amplitude, average frequency, and RA value. The DIC results revealed that the estimated diameters of the damaged zones of GN-1, GN-2, GB, and SL were 1.66D, 1.53D, 1.49D, and 1.9D, respectively. The average displacements at the surface of the damaged zones for these specimens were 0.814, 0.786, 0.661, and 0.673 mm, respectively, thus demonstrating a strong correlation with Young's modulus. The AE analysis with DIC revealed that tensile failure occurred in the direction parallel to the maximum compression axis as the load increased. Thus, this study provides fundamental data for a comprehensive analysis of damaged zones in underground openings and will facilitate the optimization of rock engineering projects and safety assessments thereof.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.230-240
• /
• 1997

본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 알아보기 위해 Monofilament 섬유와 Fibrillated 섬유의 두 종류 폴리프로필렌 섬유를 선택하여 10$\times$10$\times$50 cm 보 시편을 만들었는데, 이때 사용된 두 종류의 섬유 길이는 19 mm이고, 섬유 혼입량은 0%, 1%, 2%, 3%로 하였으며, 초기균열 깊이의 영향을 알아보기 위해 초기 균열길이를 각 섬유 혼입량에 따라 1.5cm, 3.0cm, 4.5cm로 하여 실험을 수행하였다. 또한, 본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 규명하기 위해 보 시편에 대한 4 점 하중 휨시험을 통해 하중-하중점 변위 곡선을 각 시편에 대해 측정하였고, 이때 COD 게이지를 이용하여 하중-CMOD 곡선도 측정할 수 있었다. 이러한 실험결과를 통해, 섬유혼입량과 초기 균열 깊이에 따른 압축강도, 휨강도 및 휨인성, 응력확대계수, 파괴에너지 등이 규명되었다. 이러한 결과에 대한 분석으로부터 Fibrillated 폴리프로필렌 섬유가 Monofilament 섬유보다 연성 효과가 큰 것을 알 수 있었으며, 특히 하중-CMOD 곡선으로부터 계산되는 파괴에너지인 Jc가 믿을만한 파괴특성 인자임을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.156-165
• /
• 2014

This paper is the first investigation on the effect of flow control methods on the part load performance in a spark ignition engine. For comparison of the methods, two control devices, port throttling and masking, were applied to a conventional engine without any design change of the intake port. Steady flow evaluation shows that steady flow rates per unit opening area and swirl ratio are very low compared with the port throttling and saturated from mid-stage valve lift, however, swirl increases slightly as the lift is higher in case of 1/4 masking control. In the part load performance, the effect of simple port throttling on lean misfire limit expansion is limited and insufficient; on the other hand a masking improves the limit considerably without any port modification for increasing swirl. Also the results show that the intake flow control improves the combustion with following two mechanisms: stratification induced by the combination of the flow pattern and the fuel injection timing attribute to ignition ability and the intensified flow ensure fast burn. In addition fuel consumption reduces under the flow controls and the reduction rate is different according to the operation conditions and control methods. At the Stoichiometric and/or low speed and low load the throttling method is more advantageous; however vice versa at lean and high load condition. Finally, the throttling is more efficient for HC reduction than masking, on the other side the NOx emissions increase under the masking and decrease under the port throttling compared with conventional port scheme.

• 한국지진공학회논문집
• /
• 제28권2호
• /
• pp.77-83
• /
• 2024

The design shear strength equations of RC shear walls have been developed based on their performance under in-plane (IP) loads, thereby failing to account for the potential performance degradation of shear strength when subjected to simultaneous out-of-plane (OOP) loading. Most of the previous experimental studies on RC walls have been conducted in one direction under quasi-static conditions, and due to the difficulty in experimental planning, there is a lack of research on cyclic loading and results under multi-axial loading conditions. During an earthquake, shear walls may yield earlier than their design strength or fail unexpectedly when subjected to multi-directional forces, deviating from their intended failure mode. In this paper, nonlinear analysis in finite element models was performed based on the results of cyclic loading experiments on reinforced concrete shear walls of auxiliary buildings. To investigate the reduction trend in IP shear capacity concerning the OOP load ratio, parametric analysis was conducted using the shear wall FEM. The analysis results showed that as the magnitude of the OOP load increased, the IP strength decreased, with a more significant effect observed as the size of the opening increased. Thus, the necessity to incorporate this strength reduction as a factor for the OOP load effect in the wall design strength equation should be discussed by performing various parametric studies.

• 한국강구조학회 논문집
• /
• 제27권2호
• /
• pp.155-167
• /
• 2015

춤이 깊은 데크를 6m 이상 장스팬 바닥에 사용할 경우에는 시공단계에서 데크의 발생하는 많은 처짐에 의한 작업자 및 시공안전을 고려하여 가설지주를 사용하는 것이 통상적이었다. 그러나 시공안전은 확보하였지만, 가설지주의 설치는 작업자의 통로제한, 공간의 협소, 능률의 감소 등으로 시공성의 문제가 발생한, 이는 춤이 깊은 데크는 상부 개방인 골 형태로 인한 벌어짐이나 박판으로 인한 웨브크리플링, 데크의 상부 플렌지의 국부처짐 등의 불안정성 문제가 발생할 수 있고, 이로 인해 개방형 데크의 횡-비틀림 좌굴과 같은 구조적 문제가 발생할 수 있다. 본 연구는 시공단계 동안 작용하중에 대한 춤이 깊은 데크의 제한 처짐 값을 제안하며, 장스팬의 구조안정성을 확보하고자 춤이 깊은 데크의 단부에 캡플레이트로 보강한 후 시공단계하중을 모래 재하 방법으로 실물실험 제작하여 실험을 실험하였다. 실험결과 개선안 캡플레이트 적용 유무에 따라 발생 처짐량이 최대 1/5 감소하였고, 모든 특히 단부를 연속화한 실험체의 경우, 처짐이 국내 규준과 제안 처짐 값(L/180, 30mm)을 만족하였다.

• 건축역사연구
• /
• 제21권2호
• /
• pp.7-20
• /
• 2012

As the corner of wooden pagoda forms the roof by closely bordering left and right eaves on the various purlins and angle rafters, it is designed for every face to be recognized as front whose structure system increases load to bear proportionally. The corner of wooden pagoda is inseparable with the corner bracket set as it becomes stable thanks to the corner bracket set structurally and load burden under restrained structure makes the corner bracket set really important. Accordingly, this study could figure out some facts by analyzing corner bracket sets of Palsangjeon of Beobjusa Temple in Korea, Seokgatap of Bulgungsa Temple in China and Ojungtap of Beobryungsa Temple in Japan which were constructed with pure wooden structure. This study demonstrated that corner bracket set played a pivotal role in keeping balance of concentrated load of corner (corner of opening) in each floor that contributed to the stability of wooden pagoda structurally despite multiple duplications of floors and also figured out the outfit of corner bracket set was subject to the floor type and the cross section of Gongpo installed on top of Pyeongju. Wooden pagodas in 3 countries were two floor types of octagon and square, and employed different connection method between upper and lower floors. The difference between floor and duplication method determines the method of corner, but even different methods were sufficient to have entirety in every side by completing dynamic principle of corner bracket set even though old method had to solve the problem of concentrated load and it also confirms that it was essential Gongpo to prevent any deformation of corner.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.629-659
• /
• 2016

In cold-formed stainless steel lipped channel-sections, web openings are becoming increasingly popular. Such openings, however, result in the sections becoming more susceptible to web crippling, especially under concentrated loads applied near the web opening. This paper presents the results of a finite element parametric study into the effect of circular web openings on the web crippling strength of cold-formed stainless steel lipped channel-sections for the interior-one-flange (IOF) loading condition. This involves a bearing load applied to the top flange of a length of member, away from the end supports. The cases of web openings located centred beneath the bearing load (i.e. beneath the bearing plate delivering the load) and offset to the bearing plate, are considered. Three grades of stainless steel are considered: duplex EN1.4462, austenitic EN1.4404 and ferretic EN1.4003. In total, 2218 finite element models were analyzed. From the results of the parametric study, strength reduction factors for load bearing capacity are determined, where these reduction factors are applied to the bearing capacity calculated for a web without openings, to take account the influence of the web openings. The strength reduction factors are first compared to equations recently proposed for cold-formed carbon steel lipped channel-sections. It is shown that for the case of the duplex grade, the strength reduction factor equations for cold-formed carbon steel are conservative but only by 2%. However, for the cases of the austentic and ferritic grades, the cold-formed carbon steel equations are around 9% conservative. New strength reduction factor equations are proposed for all three stainless steel grades.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권8호
• /
• pp.862-868
• /
• 2013

직조 형태의 복합재료의 파손 메커니즘은 복합적이다. 지금까지 평직 복합재료를 대상으로 많은 연구가 이루어졌으나, 파괴 저항성 거동은 아직도 표준화 되지 못한 실정이다. 또한 섬유배열방향에 따라 다른 거동을 보인다. 그래서 하중방향에 대한 섬유배열방향에 따른 파괴 저항성 평가가 필요하다. 이에 본 연구에서는 평직 CFRP 복합재료를 대상으로 다양한 섬유배열방향에 따른 파손강도 및 파괴 저항성 평가를 수행하였다.(섬유배열 방향: $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$) CT 시험편을 이용하여 모드 I 조건으로 시험을 수행하였다.