• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.349-354
• /
• 2001

The present study addresses the open end correction associated with the reflection and discharge phenomena of a weak shock wave from an open end of a duct. The open end correction of the weak shock wave is investigated experimentally and by numerical computation. An experiment is made using a simple shock tube with an open end, and computation is performed to simulate the experimental flow field using the unsteady, axisymmetric, compressible, flow governing equations. The results obtained show that an open end correction should be involved for shock wave discharge and reflection problems generated from the exit of the duct with an open end baffle plate. With a baffle plate less than three times the duct diameter, it is found that the open end correction is a function of both the diameter of the baffle plate and normal shock wave magnitude. However, for a baffle plate larger than three times the duct diameter, it is independent of the baffle plate diameter. The present computations predict the results of shock tube experiment with good accuracy. A new empirical equation for prediction of the open end correction is found for the weak shock reflection and discharge phenomena occurring at the open end of the duct with and without a baffle plate.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.154-155
• /
• 2010

본 논문에서는 end-fire 방사패턴 특성을 가지는 2.4GHz ISM 밴드용 소형 open-end slot 안테나를 설계하였다. 안테나 설계 공간은 $23mm{\times}15mm$의 좁은 영역으로 한정된 공간 내에 안테나를 설계하기 위하여 한번의 Bent된 slot을 도입하였고, End-Fire 방사특성을 내기위해 안테나 수평면상의 위쪽 방향으로 slot을 open시킨 구조이다. Bent된 slot을 이용해 전체 slot의 길이를 변화시키지 않고 주파수의 조절이 가능하고, Feeding Line의 길이와 폭을 조절하여 보다 광대역의 특성을 얻을 수 있었다. 제작된 안테나의 공진 주파수는 2.46GHz이고 대역폭은 2.4GHz~2.61GHz 까지 약 210MHz(VSWR<2) 이다. 방사패턴은 동작 주파수 내에서 slot이 open된 방향으로 end-fire특성을 가지고, 안테나의 이득과 효율은 각 각 1dBi, 70% 이상의 성능을 가진다. 설계 결과의 검증을 위해 모의실험 결과와 측정 결과를 비교하여 제시하였다.

• 대한기계학회논문집B
• /
• 제22권5호
• /
• pp.618-626
• /
• 1998

This paper describes a series of fundamental studies on reflection and emission of weak pressure waves from an open end of a pipe. Acoustical theories which have been employed in the plane pressure waves inside a pipe are applied to the present study. The objective of the present study is to investigate the reflection or emission coefficient of pressure wave at an open end of a pipe, the length of open end correction, and the directivity characteristics of the pressure waves emitted from the pipe. The results show that the reflection coefficient of pressure wave at an open end and the length of open end correction decrease for the wave length of pressure wave to increase. It is also found that the reflection coefficient for a baffle plate at the exit of pipe is larger than that for no baffle plate.

• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.239-246
• /
• 2001

The present study addresses the open correction associated with the reflection and discharge phenomena of a weak shock wave from an open end of a duct. The open correction of the weak shock wave is investigated experimentally and by numerical computation. An experiment is made using a simple shock tube with an open end. and computaion is performed to simulate the experimental flow field using the unsteady, axisymmetric compressible. flow governing equations. The results obtained show the an open correction should be involved for shock wave discharge and reflection problems generated from the exit of the duct with an open baffle plate. With a baffle plate less than three times the duct diameter, it is found that the open end correction is a function of both the diameter of the baffle plate and normal shock wave magnitude However, for a baffle plate larger than three the duct diameter it is independent of the baffle plate diametre, The present computations predict the results of shock tube experiment with good accuracy. A new empirical equation for prediction of the open correction is found for the weak shock reflection and discharge phenomena occurring at the open of the duct with and without a baffle plate.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.146-153
• /
• 1997

An experimental study was performed of natural-convection downward smolder spread across a sawdust bed peripherally enclosed with an insulating container, to examine the effect of the open- ing condition at the top end on downward smolder spread. Experiments were conducted by using relatively coarse sawdust and 25-cm-long cylindrical container The variations of temperature profiles along the bed axis with time were determined far different opening conditions and were com-pared with those in smolder spread from open top to open bottom. It was shown that the smolder zone initiated from open top toward closed bottom penetrates the bed with keeping high peak temperature like the case of open top to open bottom spread, although mean spread rate is smaller. This indicates that the downward smolder zone can be sustained stably if sufficient air or oxygen Is supplied from the back of it by natural convection even if upward draft entering from the bottom of the bed is absent. When the top end was partially closed by mounting a cover after stable smolder spread had begun from open top toward open bottom, the temperature at the peak decreased more than 200 K and the smolder zone became to spread with thickening residue. In this case, the shape of temperature profiles continuously changed or decayed until end-effect at the open bottom end enhanced the reaction. The temperature at the shrunk peak, free from the end-effect, was almost identical with the temperature at the exothermic oxidative-degradation zone in smolder spread from open top to open bottom. from these results, it can be inferred for natural-convection downward smolder spread that the oxidation reaction of the char is very sensitive to the oxygen supply by natural convection in the space above the smolder zone, and that the top end opening condition strongly alters the completeness of reactions, structure, and behavior of the smolder zone.

• 대한전자공학회논문지TC
• /
• 제45권12호
• /
• pp.146-151
• /
• 2008

Suspended Strip Line의 Open End와 Step 불연속 효과의 등가회로를 구하였다. 각 불연속 효과를 표현하는 회로정수들을 EM 해석 결과로부터 최적화한 후 수식으로 표현하였으며, 수식의 계수들은 모든 임피던스 경우에 맞도록 curve fitting을 통하여 구하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.718-725
• /
• 2003

The present study addresses the distortion of the compression wave reflected from an open end of a shock tube. An experiment is carried out using the simple shock tube with an open end Computational work is also performed to represent the experimented flows. The second-order Total Variation Diminishing scheme is employed to numerically solve the unsteady, axisy-mmetric, inviscid, compressible governing equations. Both the experimented and predicted results are in good agreement. The generation and development mechanisms of the compression wave, which Is reflected from the open end of the shock tube, are obtained in detail from the present computations. The effect of size of the baffle plate at the open-end that causes the reflection of the incident expansion wave is found negligible. A good correlation is obtained for transition of the reflected compression wave to a shock wave inside the tube. The present data show that for a given wave length of the incident expansion wave the transition of the reflected compression wave to a shock wave can be predicted with good accuracy.

• 한국전자파학회논문지
• /
• 제8권5호
• /
• pp.486-487
• /
• 1997

본 논문은 CPW 불연속 중 개방단, 연결된 접지면을 갖는 개방단, 캡, 개방단 CPW 스터브에 대한 순수 용량 성 집중소자 등가회로를 제시하였으며, 불연속의 불리적 차원과 주파수 함수로써 등가회로의 커패시턴스값을 나 타내었다. 커패시턴스값은 3차원 유한차분 시간영역볍(3D-FDTD)을 적용하여 계산한 주파수 영역 산란 파라미 터로부터 이끌어냈다. 개방단, 연결된 접지변을 갖는 개방단 및 캡 불연속에 대해 FDTD으로 계산한 커패시턴스 값을 3차원 유한 차분볍(3D- FDM)으로 계산한 준정적 결과와 비교하였다.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.52-56
• /
• 2016

This paper suggests a class-F power amplifier with split open-end stubs to provide a broadband high-efficiency operation. These stubs are designed to have wide bandwidth by splitting wide open-end stubs into narrower stubs connected in shunt in an output matching network for class-F operation. In contrast to conventional wideband class-F designs, which theoretically need a large number of matching lines, this method requires fewer transmission lines, resulting in a compact circuit implementation. In addition, the open-end stubs are designed with slant ends to achieve additional wide bandwidth. To verify the suggested design, a 10-W class-F power amplifier operating at 1.7 GHz was implemented using a commercial GaN transistor. The measurement results showed a peak drain efficiency of 82.1% and 750 MHz of bandwidth for an efficiency higher than 63%. Additionally, the maximum output power was 14.45 W at 1.7 GHz.

• 정보처리학회논문지C
• /
• 제18C권6호
• /
• pp.423-432
• /
• 2011

최근 네트워크 가상화 기능 및 망에 대한 프로그래밍의 용이성을 제공해 줄 수 있는 기반 기술로 오픈플로우 기술이 주목 받고 있다. 국내에서는 캠퍼스 실험실 수준의 로컬 망에서 오픈플로우 기술의 적용 및 Layer 3을 경유한 캠퍼스 망 간의 연동이 이뤄지고 있지만 IP 계층에서의 네트워크 지연 등으로 인한 성능 저하가 문제되고 있다. 본 논문에서는 로컬 망 수준이 아닌 국가과학기술연구망 기반의 광역 규모 오픈플로우 망을 순수 Layer 2상에서 설계 및 구축하고 종단간 Round-trip Time 측정, TCP/UDP 성능 테스트를 통해 오픈플로우 망과 오픈플로우 적용 전 일반 망의 성능을 비교 분석한다. 분석 결과, 광역 규모의 오픈플로우 망은 일반 망과 비교할 때, UDP 스트림에 대한 초반 패킷 손실 문제를 제외하고 대등한 수준의 성능을 보였다. 또한, 초반 UDP 패킷 손실로 인한 성능 저하 현상은 컨트롤러 상에 반복 유입되는 동일한 "Packet_in" 이벤트에 대한 예외 처리를 구현함으로써 개선시킬 수 있었다.