• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.435-443
• /
• 2017

The Hanae deposit is located within the Cretaceous Gyeongsang Basin. The Cu-bearing hydrothermal quartz vein formed by narrow open-space filling along fracture in the sedimentary rocks as Jindong Formation. The Hanae Cu-bearing hydrothermal deposit shows a paragenetic sequence of pyrrhotite-pyrite $\rightarrow$ pyrite-chalcopyrite-sphalerite(${\pm}$Bi-bearing tellurides) $\rightarrow$ Ag-bearing telluride mineralization $\rightarrow$ secondary mineralization. Fluid inclusion data indicate that the Hanae Cu-bearing hydrothermal mineralization occurred from dominantly aqueous fluids at temperatures of $400^{\circ}C-200^{\circ}C$. Equilibrium thermodynamic interpretation of the mineral paragenesis and assemblages combined with fluid inclusion data indicate that early main Cu-bearing ore mineralization in the vein starts at about $350^{\circ}C$ which corresponds to sulfur fugacity from about $10^{-9.2}$ to $10^{-8.7}bar$ with oxygen fugacity of about $10^{-32.1}$ to $10^{-29.8}bar$. Late main Cu-bearing ore mineralization in the vein occurs at about $250^{\circ}C$ which corresponds to sulfur fugacity from about $10^{-13.5}$ to $10^{-11.7}bar$ with oxygen fugacity of about $10^{-38.4}$ to $10^{-35.2}bar$. The late Ag-bearing telluride mineralization in the Hanae hydrothermal system occurs at about $200^{\circ}C$ which corresponds to minium Tellirium fugacity value of about $10^{-18}bar$ with sulfur fugacity of about $10^{-14.0}$ to $10^{-10.9}bar$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.101-114
• /
• 2012

The physico-chemical characteristics including water temperature, salinity, dissolved oxygen(DO), chemical oxygen demand (COD), chlorophyll-a(Chl. a), suspended particulate matter(SPM) and dissolved inorganic nutrients were investigated in the Garolim Bay, Yellow Sea, Korea in 2010 carried out six times per year at 11 fixed stations by Korea Fisheries Research & Development Institute. The water temperature, salinity, COD, dissolved inorganic nutrients, Chl. a and SPM showed significant difference between surface and bottom water but the other parameters didn't. There were not significant difference between stations. The water temperature showed typical change patterns of the temperate seawater. The annual average of salinity showed more than 31 so that there could not have occurred low saline water. The average of DO from June to August showed over than 3mg/L which showed higher than the below standard value of the hypoxic (oxygen-deficient) water. The average of Chl. a varied $1.68{\mu}g/L$ at surface, $2.38{\mu}g/L$ at bottom layer in June and $1.68{\mu}g/L$ at surface, $1.57{\mu}g/L$ at bottom layer at August. The dissolved inorganic nutrients showed high concentration in February and low concentration in August due to the limitation of the freshwater input in summer and phytoplankton used to the dissolved inorganic nutrients. The ratio of DIN/DIP showed 30.52 at surface and 37.89 at bottom layer in June which was higher than other month. The SPM was 44.15mg/L at bottom layer in February which was the highest value in this study due to the northwest monsoon. Because of the actively water change in the open sea without inflow of freshwater from land in Garolom Bay, there were not occurred low saline water and hypoxic water. thus, this Bay showed good water quality and required to be conserved continuously as important costal area for fisheries.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1254-1268
• /
• 2009

In 1998, because of the economic crisis called IMF Crisis in Korea, Kyungbu high speed railway project could run by modifying the original plan to open it as a 1st phase only by utilizing the existing railway lines from Seoul to Siheung and the other one from Daegu to Pusan. The modified plan includes that the line from Daegu to Pusan will be constructed as a second phase in next time. Starting railway operation with the changed plan, the combined application operation of high speed rail, passenger rail and freight rail was caused partly from Seoul to Siheung to run into capital area. As a result, the opinion for additional railway line construction is insisted continuously because the operation volume of passenger rail was forced to be reduced, the service quality of it was decreased and it became difficult to add new high speed services. Moreover, with regard to Honam high speed rail, the new construction plan of station in Kangnam metro area as a basement station for starting from Suseo was changed to the plan of turning out at Osong because of the economic effectiveness and this kept resident people in Kangnam metro area and southern Kyungki area unable to get the opportunity of high speed rail service benefit. After beginning of Kyungbu high speed railway operation, national transportation system developments are focused on high speed rail, and when the second phase construction of Kyungbu high speed rail, beginning operation of Kyungjeon line, Jeolla line double track construction, Honam high speed rail in 2014, is completed, the demand for high speed rail will be increased and it is unavoidable to make Kwangmyung station as a basement station and to reduce the number of passenger rail operation. At this moment, it is valuable to consider adding the railway line capacity in capital area to improve the transferring service for citizen who live in area without Kyungbu high speed rail station and to expand the service area from Kangbuk to Kangnam and southern Kyungki area. Accordingly, in this paper, the effective rail operation method, facility plan and the other issue to be reviewed for increasing capital high speed railway lines will be mentioned.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• The Korean Journal of Pesticide Science
• /
• v.9 no.1
• /
• pp.70-80
• /
• 2005

To evaluate the exposure of molinate in agricultural environment and its effect against the non-target crop in air, this experiment was conducted to elucidate volatilization characteristics of molinate in aquatic condition and to determine critical concentration of molinate in the air causing phytotoxicity to Chili pepper. Cumulative volatilized rate of molinate from water was 22.7% at $35^{\circ}C$ for water temperature and 20 L/min for air velocity while 3.2% at $25^{\circ}C$ and 10 L/min within 47 hour after applied under closed system, respectively. The molinate concentrations in air above 60 cm height from soil surface of valley and open paddy rice field were reached the highest value of 18.17 and $11.59{\mu}g/m^3$, respectively within 24 hours after applying granular formulation at dose rate of molinate 150 g/1,000 $m^2$. However, their concentrations were drastically diminished to around 0.18 and $0.51{\mu}g/m^3$ level in 20 days after application, which volatilization pattern were similar to both regions. Also, the concentration of molinate in air above 60 cm height from soil surface was distributed higher 2 times than that above 180 cm height. Meanwhile, a phytotoxic symptom against the nearby chili pepper was revealed within three days after applied and molinate was detected $0.004{\sim}0.006$ mg/kg level from severe damaged leaves. The dose and exposure relations of molinate in the air against the non-target crop was also investigated in lab trial. The phytotoxic symptom, shriveled leaves, of the chili pepper was encountered by exposing two days with concentration of $13.6{\mu}g/m^3$, three days with $6.8{\mu}g/m^3$ or four days with $3.4{\mu}g/m^3$. The symptom was still recovered within four weeks after the plants had received fresh air. On the other hand, the phytotoxic response through root uptake of the herbicide in water culture was relatively insensitive, in which the symptom is observed ten days with the concentration of 300 ${\mu}g/L$.

• Journal of Korean Society of Forest Science
• /
• v.79 no.3
• /
• pp.302-308
• /
• 1990

This study was conducted to determine the effects of mycorrhizal inoculation and ortet ages on the rooting of Quercus acutissima cuttings. The cuttings taken from 12-week-, 2-year-, 4-year-, and 20-year-old plants were rooted in mid summer in the rooting medium (vermiculite 2 : peatmoss 1 by volume) with or without Pisolithus tinctorius (Pt) and Glomus sp. inocula and IBA under intermittent misting system in an open shed. The average percentages of rooting were about 82%, 49%, 29%, and 13% for cuttings taken from 12-week-, 2-year-. 4-year-, and 20-year-old seedlings, respectively. Pt inoculation, enhanced rooting of cuttings at all age classes, except 12-week-old seedlings, with the highest enhancement(22%) observed in cuttings taken from 20-year-old trees. The highest percentage of rooting in each age group eras 88.9% in 12-week-old seedlings treated with Pt plus 3.000ppm IBA, 75% in 2-Year-old plants with 1,000ppm IBA, 58.3% in 4-year-old plants with 3.000ppm IBA and 22% in 20-year-old plants. The addition of Glomus sp. fungus inoculum failed to enhance rooting. Pt mycorrhizal inoculation enhanced root dry weight, length, and diamter of adventitious roots at cuttings taken from 12-week- and 20-year-old trees, except the cuttings taken from 4-year-old seedlings. Rooted cuttings had more total nitrogen content in the leaves than unrooted cuttings, and the greater rooting response was associated with the higher phosphorus content in the leaves.

• Journal of Korean Public Health Nursing
• /
• v.8 no.2
• /
• pp.35-56
• /
• 1994

This article was intended to survey whether Roy' Adapation model ('Roy Model') can be applied to family health assessment and to study whether application of the Roy Model to a Korean family is feasible. under the Roy Model, a family is viewed as an adaptation system having a series of process of input. process, feedback, and output. Further, the Roy Model indicates that a family contains Physiolosical, self-concept. role function and interdependent mode in respect of internal or external stimuli. In the event where the family health assessed, the adaptation mode of that family must be assess at the first stage. Then, the focal, contextual, residual stimuli affecting the family must be assessed. In 1984 Hanson suggested four types of family adaptation mode based upon the Roy Model and thereby enhanced the possibility for family health assessment. In order survey whether the Roy Model can be applied to the Korean family, the author of this article contracted adults of 169 who live in 'A' city to make open questions regarding family and then analyzed responses from them by utilizing Roy model. This study categorized family Adaptation mode based upon the' four types of family adaptation mode developed by Hanson. As a result of this study, family adaptation mode was categorized into 117 concepts. Those 117 concepts are consisted or Physiolosical mode of 47. self­concept mode of 56, role function mode of 9 and interdependent mode of 5. Further. stimuli affecting family were classified based upon Roy's definition as to three types of stimuli. Stimuli on a family are comprised focal stimuli concept of 19, contextual stimuli concepts of 19, one residual stimuli concept. this result implies that the Roy's Model can be applied to Korean family. Physiological mode shows meaning of survival. while self-concept mode reflects meaning of growth and emphasizes harmony among the family based on the familism. The role function mode shows continuity rather control of family member. By contrast, interdependent mode shows interaction with community to which the family belongs. but the degree of interaction does not appear too high. The analysis of family stimuli led this study to conclude that troubles within a family. changes in family structure and diease of family member generate stimuli. However, an application of the Roy Model contains the following problems: First, Roy argued that the family adaptation mode should be assessed at the first level family health assessment and then stimuli affecting family adaptation should be adaptation assessed at the second stage. To the belief of the author of this article. however, for checking family adaptation level. focal, contextual, residual stimuli should be confirmed by assessing stimuli at first stage. Then, the family adaptation mode in respect of such stimuli should be assessed. The rationale for this is that the family adaptation level is determined depending on degree of strength of focal. contextual. residual stimuli. Second. Whall (1991) raised a question 'Does one assess family adaptation mode and intervene in the stimuli?' 'Likewise, assessment of the family adaptation should be made in the following manner in order for family health to be enhanced. Third. Roy believes that additional stimuli (such as contextual and residual) are same as internal process (including nurturance. support, and socialization). However, the basis for this Roy's belief is not too clear. In spite of these problems which the author indicated above, it can be concluded that the Roy Model can serve as a good device for an assessment of family health and that the Roy Model can be applied to a Korean family. Finally, further research of family adaptation theory and family nursing theory is required for a development of these theories.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.417-430
• /
• 1993

이 연구는 환경적 요소(간호사의 자율성, 조직의 표준화)와 개인의 특성(통제위, 나이, 경험. 간호역할개념, 도덕성), 직무 스트레스, 윤리적 의사결정 사이의 관계를 이론적 틀을 구성하여 테스트함으로써 그 인과관계를 탐구하였다. 본 연구를 위해 개발된 모형은 1) Katz와 Kahn의 조직에 대한 개방체계 이론(open systems theory of organization) ; 2) Kahn. Wolfe, Quinn, Snoek의 스트레스 이론 (theory of stress) : 3) Kohlberg의 도덕발달 이론(theory of moral develop-ment): 그리고 4) 여러 문헌고찰을 기초로 하였다. 본 연구의 모형은 2가지의 주요 종속변수(직무 스트레스, 윤리적 간호행위), 2가지 매개변수(간호 역할개념, 도덕성 발달정도) 그리고 여러 독립변수들(조직의 표준화, 자율성, 통제위, 교육, 나이, 경험 등)로 구성되었다. 간단히 말해, 간호사의 스트레스와 윤리적 간호행위 를 개인 자신과 환경이라는 두 요소의 결과로 간주한 것이다. 미국(2개주)의 여러 건강관리기관에 근무하는 224명의 정규 간호사를 대상으로 하였고. 가설 검증을 위하여 1) 변수간의 인과관계를 조사하기 위한 Linear Structural Relationships(LISREL)기법과 2) 나이, 경험, 교육이 변수간의 관계에 미치는 중간역할을 알아보기 위해 상관분석을 이용하였다. LISREL결과를 보면 제시된 모델이 각 내재 변수에 상당한 설명력을 가지면서 자료에 잘 맞는 것으로 나타났다. 이 연구에서 가장 뚜렷한 점으로 나타난 것은 개인의 특성보다 환경적 요소로서의 자율성이 직무스트레스와 윤리적 의사결정을 예견하는데 훨씬 중요한 변수로 부각되었다는 점이다. 또한 간호사의 전문적 역할개념과 봉사적 역할개념이 간호사의 윤리적 의사결정을 예견하는 가장 중요한 요소로 나타났다. 중간영향(moderation effect)을 보면, 젊고 경험이 적은 간호사일수록 나이가 많고 경험있는 간호사보다 환경적 요소(자율성)에 더 큰 영향을 받는다는 것을 암시하고 있다. 또한 4년제 대학 이상을 졸업한 간호사의 윤리 적 간호행 위 는 2, 3년제 를 졸업 한 간호사 보다 환경적 요소에 의해 덜 영향을 받는 것으로 나타났다. 한편 자율성의 부족은 2, 3년제 졸업 간호사보다 4년제 졸업 간호사에게 더 심한 스트레스가 되고 있음을 시사하였다. 이 연구의 결과로부터 적어도 다음과 같은 두 가지 실제적인 제언을 도출할 수 있다. 첫째, 이 연구는 환경적요소로서의 자율성이 다른 어떤 개인적인 요소보다 직무 스트레스를 예견하는 데 중요한 요소라는 것을 제시하였다. 이것은 간호행정가들에게, 간호사의 직무 스트레스를 감소시키기 위해선 “자율성”이 아주 중요히 다루어져야 한다는 것을 의미한다. 만일 간호사들의 직무스트레스가 그 개인의 복지에 큰 해가 되고 환자를 간호하는 데 직접적으로 관계된다면, 간호행정가는 그 조직의 직무체계를 다시 평가해서 일에 대한 새로운 설계가 필요한지를 파악해야 한다. 또한 이 연구는 직무를 다시 설계할 경우, 누구에게 먼저 촛점을 두고 시작해야 하는지를 밝혀주고 있다. 즉, 젊고 경험이 미숙한 간호사들에게 촛점을 두고 시작해야 하며, 작업환경의 가장 중요한 차원중의 하나인 사회적 지원(social support)을 조심스럽게 고려해 보아야 한다. 둘째, 간호사의 윤리적 간호행위를 높히기 위해 전문적 역할개념과 봉사적 역할개념이 재강조될 필요가 있다. 이 두 역할개념 들을 교육을 통하여 효과적으로 가르칠 필요가 있다고 본다. 이 두 개념들이 간호사의 바람직한 간호행 위에 영향을 미치는 가장 중요한 요소로 나타났기 때문이다. 또한, 본 연구결과에 따르면, 경험이 많을수록 일에 싫증을 느껴 바람직한 윤리적 간호행위가 감소되는 경향이 있었다. 따라서, 건강관리체제 (health care system) 안에서의 간호사의 역할이-전문직으로서의, 그리고 환자를 위한 옹호자로서의-학교와 임상에서 효과적으로 교육되어져야 한다고 본다. 간호사들의 역할에 대한 계속적인 교육이 학생은 물론 임상 간호사들에게도 실시되어져야 할 것이다. 미래연구의 방향을 제시해 보면 첫째로 연구의 일반화를 높히기 위해 더 많은 대상자를 포함시켜야 한다. 이는 여러 종류의 표본을 반드시 한번에 전부 포함시켜야 한다는 것을 의미하는 것이 아니고, 특정한 여러 표본들을 연속적으로 연구함으로서 이 목표를 성취할 수 있다고 생각한다. 둘째는 여러 construct들(윤리적 간호행위, 직무 스트레스, 간호 역할개념 등)에 대한 적절한 측정도구를 개발해야 한다. 측정도구를 개발하기 위해서는 풍부하고 세세한 통찰력을 제공하는 질적인 정보를 얻는 것이 선행되어야 한다. 셋째, 윤리적 간호행위와 직무 스트레스에 관한 연구를 증진시키기 위해 실험설계 및 종단적 연구(expel-imental, longitudinal design)가 시도될 필요가 있다. 마지막으로, 윤리적 간호행위와 직무 스트레스를 예견할 수 있는 이론적 탐구(theoretical exploration), 즉 이론정립을 위하여, 환경적 요소와 개인의 특성에 대한 자세한 정보를 제공해 줄 수 있는 질적 연구들이 요구된다.

• Korean Journal of Environment and Ecology
• /
• v.21 no.3
• /
• pp.243-256
• /
• 2007

The purpose of this paper is aimed at identifying the planting condition of greenbelt axis covering forests located at Sinhyeon-eup, Geoje-si and also establishing improvement plans for the ecological organization. The study was executed with buffer green space designed to mitigate noise, which is located at a halfway point linking Mt. Yukkyo(altitude of 50m) and Mt. Jungmae(altitude of 131m). The number of the biotope patterns was classified into 17 in total: the two are urbanized districts such as a townified district and streets and another 15 are greenbelts and open space such as forest biotope, inland water biotope, and landscaping tree plantations biotope. According to the analysis of biotope types, it was estimated that the making use of already established buffer greens as a linking medium with a foothold of Mt. Yukkyo and Jungmae, whose natural eco-system is well suited for habitation of living organism, is the one and only way to the influx of living organism into the downtown area. The green coverage rate of the base green area, sub-base green area and linkage green area was 160.29%, 128.37% and 44.37% respectively; the green capacity coefficient(i.e. GVZ[$Gr{\ddot{u}}nvolumezahl$]) for base green area, sub-base green area and linkage green area was $4.04m^3/m^2,\;3.95m^3/m^2\;and\;0.65m^3/m^2$ respectively. The base green area has constituted multi-layered vegetation structure and thus played a role as habitats for living organism and supply centre of species, whereas the sub-base green area has destroyed lower layer vegetation, and the linkage green area was in bad shape due to the lack of planting volume and damage of the shrub layer. Accordingly, this research paper intended to suggest detailed implementation plans for the improvement in landscape for city dwellers' use and relaxation; in other words, this paper focused on ecological build-up for the Influx of wild birds into the downtown area for the promotion of bio-diversity of species through the linkage of base green areas and the fostering of nature observing trails for citizens as well as the connecting of green areas through the build-up of roadside greens to make these green areas to be efficiently used as corridors for the influx of wild birds and bio-organism habitation and for citizens' using space.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.247-252
• /
• 2011

Electrical conductivity, drainage, and irrigation amount of nutrient solution are important factors for determination of the mixing ratio of fresh and reused nutrient solutions in closed-loop soilless culture. Generally a fixed mixing ratio is applied in commercial scale greenhouses using solar radiation-based irrigation system. Although it ensures continuous supply of fresh nutrient solution in the mixing process, occasional discharge of the drainage is inevitably required. This study was conducted to compare the nutrient replenishing effect under different mixing processes and to investigate appropriate mixing process. For this experiment, a fixed mixing ratio (FR), modifiable mixing ratio (MR), and open-loop (OP) as control were applied. Mixing ratio was determined by a set value of EC for dilution of collected drainage in FR and the set values of 1.0 and $2.0dS{\cdot}m^{-1}$ were used as treatments (FR 1.0 and FR 2.0), respectively. In MR, mixing ratio was determined based on EC and volume of drainage within irrigation volume per event. The volume of drainage stored in the drainage tank tended to increase in FR 1.0. Although such trend was not observed in FR 2.0 and MR, the volume of drainage stored in MR was lower than that in FR 2.0. The ion balance of $Mg^{2+}:K^+:Ca^{2+}$ or $SO^{2-}_4:NO^-_3:PO^{3-}_4$ in the drainage and reused nutrient solution changed within a narrow range regardless of treatment.