• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.4
• /
• pp.337-342
• /
• 2000

In water treatment plants, open channel is used to distribute incoming flow to parallel treatment unit, such as flocculation basin and sedimentation basin. These control devices must be designed so that the incoming flow evenly distributed to the process unit. this is important in the view of optimizing process unit. In the recent past. significant insights into the sedimentation process have been developed. In this study, the 2-D computer program is developed to investigate fluid flow field and velocity vectors in flocculation sedimentation inlet distribution weir and calculate flow rates in each inlet weir. The specific purpose of this study is to analyze physical design factors, such as now rates, shape of channel, tapered angle in tapered type channel and main channel width.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.467-470
• /
• 2016

This paper deals with how to operate the sensor information through the GS1 standards in agricultural growth/distribution environment in the agricultural business. We defines the type of sensor to be used for agricultural growth / distribution environment monitor, GS1 standard identifiers for operating the sensor information, structure of the standard events, structure of schema growth / distribution environment to storage / share information and describes a method for storing, sharing information with a standard interface.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.963-972
• /
• 2003

Performance characteristics of the planar-type solid oxide fuel cell (SOFC) are investigated by the analysis of flow fields coupled with heat and mass transfer phenomena in anode and cathode channels. For these purposes, performance analysis of the SOFC is conducted based on electrochemical reaction phenomena in electrodes and electrolyte coupled with flow fields in anode and cathode channels. In the present study, the isothermal model adopted in the previous paper prepared by the same authors is extended to the non-isothermal model by solving energy equation additionally with momentum and mass transfer equations using CFD technique. It is found that the difference between isothermal and non-isothermal models come from non-uniform temperature distribution along anode and cathode electrodes by solving energy equation in non-isothermal model. Non-uniform temperature distribution in non-isothermal model contributes to the increase of average temperature of the fuel cell and influences its performance characteristics.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.10a
• /
• pp.180-192
• /
• 1998

One of the conventional gas burners has nowadays been used for ladle preheating. As a ladle is one of the open-type furnaces, however, it causes to consume much fuel because of high temperature of exhaust gas from the ladle and the exhaust gas passing through ladle cover makes it worsen a working environment nearby. Therefore, the objective of this study is to develop the recuperative burner system applying for an existing teeming ladle , which is integrated with burner, recuperator and eductor as one of the new type combustion equipments and has many advantages of simple installation, compactness and easy control, especially a great deal of energy saving through the waste heat recovery from exhaust gas. The contents of the study is to design, manufacture of recuperative burner system and to perform its tests experimentally after applying to the teeming ladle in the capacity of 100 ton. Its heat release rate is 1,700,000 kcal/h with COG(Cokes Oven Gas) as fuel gas. The test items are the temperature distribution inside the ladle and the preheated air temperature change depending upon the exhaust gas. Nox, exhaust gas analysis and noise.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.280-288
• /
• 2019

A submerged breakwater is one of the coastal structures used to reduce wave energy and coastal erosion. However, a submerged breakwater has a negative aspect in that a strong rip current occurring around an open inlet due to a difference in mean water levels at the front and rear sides of the structure leads to scouring. Such scouring has a bad effect on its stability. In order to eliminate this kind of demerit, this study investigated an artificial reef of the overflow type with openings. We also developed a program where the flows around the artificial reef of the overflow type could be analyzed numerically. An unstructured grid system was used to cover the various geometries, and the level set method was applied to treat the movement of the free surface. To verify these numerical schemes, hydraulic physical tests were performed on the submerged breakwater and double breaking type artificial reef. Then, the wave height and velocity distribution around the reef were examined using the experimental results. Comparisons between the results of hydraulic and numerical tests showed reasonable agreement.

• Korean Journal of Weed Science
• /
• v.30 no.2
• /
• pp.68-83
• /
• 2010

Weedy rice (Oryza sativa L.) occurred sympatrically with other weeds and the rice crop in Malaysian rice granaries. We conducted field surveys in 2006-2008 seasons in 7 farm blocks of Selangor's North West Project, Malaysia to enlist the new biotypes of weedy rice (NBWR) and assess their spatio-temporal pattern of distribution based on quantitative and dispersion indices. No less than 16 accessions of NBWR were identified based on their special traits, viz. panicle type, pericarp colour, presence or absence of awn, seed type and degree of grain shattering. The NBWR accessions exhibited a combination of morphological traits from open panicle, grain with awns, red pericarp, short grain type, and degrees of grain shattering. Others mimic commercial rices with close panicle, awnless grains, white pericarp, long or short grain-type. Invariably, the NBWRs mimic and stand as tall as cultivated rice namely MR219, MR220, or MR235 and these NBWR accessions stand among equals morphologically vis-a-vis the commercial rice varieties. Most accessions displayed varying degrees of grain shattering in excess of 50%, except Acc9 and Acc12. The seasonal dynamics of on the prevalence of dominant NBWR accessions were also displaying significant differences among farm blocks. While Bagan Terap farm block, for example, did not record any measurable changes in the dominant NBWR accessions over seasons, the Sungai Leman farm block recorded measurable season-mediated changes in the dominant NBWR accessions. Sungai Leman started with NBWR Acc3, Acc4, Acc5, Acc7, Acc8, and Acc12 in season 1 of 2006/2007, but no measurable records of Acc3 and Acc5 were shown in season 2 of 2007. In season 3 of 2007/2008, only Acc8 and Acc12 prevailed in the farm block. In Sawah Sempadan farm block, season 3 of 2007/2008 showed much reduced prevalence of NBWRs leaving only Acc8 and Acc12. Most accessions registered clump or under-dispersed spatial distribution pattern based on quantitative indices: variance-to-mean ratio (VMR) and Lloyd's patchiness values. The dynamics on the extent of infestation and prevalence of dominant NBWR accessions registered both season- and farm-block mediated differences. Most accessions showed VMR >1 thus indicative of having a clump or clustered spatial distribution, as exemplified by Acc3, Acc4, Acc7, Acc8 and Acc12 in all farm blocks throughout three seasons. Some accessions have either random or uniform distribution in a few farm blocks. The Acc8 has the highest population counts based on important value index, followed by Acc12, and both were the most dominant accession while Sawah Sempadan was the worst farm block infested by NBWR compared to other farm blocks. These results were discussed in relation with the current agronomic and weed management practices, water availability and extension services in the granary.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.73-85
• /
• 1995

Multi-Vertical Loop Arch Wire(MVLAW) is a kind of appliance for uprighting the mesially inclined posterior teeth axes simultaneously. In this study MVLAW was classified as 3 types by modifing the vertical loop design and named type A, B and C. Each MVLAW was fabricated from .017'x.025' TMA wire and preactivated at the distal end of the open vertical loop with 10 degree tip-back bend(type B has an electric welding stop at the distal end of each loop and type C has no electric welding stop). Type A MVLAW was preactivated at the apex of each open vertical loop with 10 degree tip-back bend(the electric welding stop of type A is positionod at the mesial side of each loop). The aim of the present study was to identify when and which MVLAW is more effective to correct the buccal segment axes simultaneously. The Photoelastic overview of the upper and lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows : 1. Higher level compression can be seen clearly at the distal curvature of the lower 1st and 2nd molar when A type MVLAW was applied without short class m elastic, but mild compression cannot be seen at the distal curvature of lower anterior teeth using the class m elastic. 2. Higher concentration was presented at the mesial curvature from the lower 1st premolar to the 2nd molar than the anterior teeth when B type MVLAW without short class III elastic was applied, but using the short class III elastic, higher concentration of compression was presented in the anterior teeth area. 3. Areas of higher compression and tension were not observed at the mesial and distal curvature of the entire 1ower teeth except lower central and lateral incisors in C type MVLAW without short class III elastic, but using the short class III elastic, higher concentration was seen at the mesial curvature of the lower 1st premolar and 1ower anterior teeth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.467-472
• /
• 2004

This paper presents the normalized site attenuation characteristics for frequencies below 80 ㎒ using forced resonant type EMI dipole antennas. The coupled integral equations for unknown current distribution are solved by the Galerkin's method of moments with piecewise sinusoidal functions. The results show that the forced resonant type EMI dipole antenna for frequencies below 80 ㎒ can be used effectively for the measuring normalized site attenuation. The calculated normalized site attenuation curves for the forced resonant type EMI dipole antenna are useful in determining the suitability of open area test sites.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3740-3744
• /
• 2010

A typically designed 'Peptide Lego' has two distinct surfaces: a hydrophilic side that contains the complete charge distribution and a hydrophobic side. In this article, we describe the fabrication of a unique lego-type peptide with the AEAEYAKAK sequence. The novel peptide with double amphiphilic surfaces is different from typical peptides due to special arrangement of the residues. The results of CD, FT-IR, AFM and DLS demonstrate that the peptide with the random coil characteristic was able to form stable nanostructures that were mediated by non-covalent interactions in an aqueous solution. The data further indicated that despite its different structure, the peptide was able to undergo self-assembly similar to a typical peptide. In addition, the use of hydrophobic pyrene as a model allowed the peptide to provide a new type of potential nanomaterial for drug delivery. These efforts collectively open up a new direction in the fabrication of nanomaterials that are more perfect and versatile.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.36-45
• /
• 2011

Public open space(Gong-Gae-Gong-Ji) is an important part of the open-space system in an urban environment. Though part of the private sector, it has a significant public function as there are as always open to the free use of every citizen for rest and amenities. A field survey of the public open space of 71 major buildings was carried out to investigate the actual state of public open spaces in the city of Daegu. As a result of this investigation, several point of issues were discussed. In distribution by 'Gu', newly-emerging sub-centers of Daegu-City, such as Bug-Gu and Dalseo-Gu as well as downtown area have many public open spaces. By the use type of buildings, retail buildings such as shopping centers and SSM account for36.6%, business buildings21.1%, and residential and commercial complexes 15.5%, respectively. Location wise, the front areas accounted for the greatest amount(42.9%) with 1 in side area(20%), and 2 in the front/side area(20%), respectively. Degree of division was 1 spot type(45.7%), 2 division type(35.7%). The misuse of public open space for private use, such as shopping and parking lots, was26.6%. On the basis and analysis of the actual status, 6 improvement devices for public open spaces were suggested: 1) The improvement of the legal regulative system, 2) the establishment of design guidelines and strengthening of deliberation, 3) administrative and financial support, 4) periodic supervision and guidance, 5) installment of signs that shows the space is open for use to every citizen, and 6) the participation of citizens in management of public open space.