• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.50-50
• /
• 2016

하천에서 유사 및 오염물질의 이동을 예측하기 위하여 초점을 두는 것에는 두 가지 요소가 있다. 입자의 농도로 나타낼 수 있는 양의 개념과 입자의 위치로 나타낼 수 있는 공간의 개념이 그것이다. 유사 입자와 같이 그 비중이 물보다 큰 경우, 흐름 내에서 침전과 부상의 메커니즘을 반복하게 되는데 최종적으로 바닥에 침적하는 위치는 하상변동, 서식처 등 하천관리의 다양한 측면에서 매우 중요하다. 유사 입자가 바닥에 침적하는 위치를 예측하는 데에는 난류와 지형 같은 많은 불확실한 요소가 내포되어 있어, 같은 크기의 유사 입자라 하여도 하나의 exact point로 도달하지 않는다. 이러한 불확실한 요소를 고려하여 침전 위치를 산정하는 방법에 대한 연구가 필요하다. 따라서 본 연구에서는 침전 위치를 확률밀도함수로 나타내어 분석하고자 한다. 입자의 침전 위치를 확률밀도함수로 나타내기 위하여 입자 기반의 추적 모형을 사용하여 위치 데이터를 얻었으며, 이를 실험데이터와 비교하여 검증 후 확률밀도함수로 나타내었다. 그 결과 입자의 침적 위치에 대한 확률밀도함수는 로그정규분포를 띠고 있음을 확인하였으며, 확률밀도함수를 나타내는 매개변수를 물리 기반 회귀모형식으로 일반화 하여 나타낼 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1247-1254
• /
• 2004

In momentum exchange theory the loss models for the circulatory flow is critically important. But because of lack of loss model on the circulatory flow, analysis model on regenerative turbomachines is not available in the open literature. In the present study circulatory loss is evaluated by combining bend's losses. Through the comparison with the previous experimental data on linear pressure gradient, a combination factor is suggested in terms of the aspect ratio of a channel. Applying this factor to two kinds of regenerative blowers the predicted results are found to be in good agreement with the experimental data of the overall performance and the head distribution along the rotational direction. Especially, the comparison with the head distribution demonstrates the accuracy of hydraulic model and loss model suggested in the present study. And the comparison with the overall performance confirms the validness of physical models as well as loss models suggested in the present study.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.655-660
• /
• 2001

The performance test of a centrifugal compressor for APU(Auxiliary Power Unit) which is developed by the collaborative research of KARI and Samsung TechWin has been conducted. The investigated compressor consists of a curved inlet, a centrifugal impeller, a channel diffuser and a plenum chamber. The experiments were carried out in an open-loop centrifugal compressor test rig driven by a turbine. For three different diffusers, overall performance data were obtained at 80%, 90% and 97% of design speed. For the initially designed wedge-type diffuser, test results showed that the compressor was operated at a higher mass flow rate than the design requirement. By reducing the diffuser throat area, the compressor operating range was shifted to lower mass flow rate range. The test result of redesigned wedge-type diffuser showed high pressure loss. To reduce the diffuser loss, diffuser inlet radius was increased and airfoil-type of diffuser was adopted. This airfoil-type diffuser showed reasonal results in terms of design requirement.

• Water for future
• /
• v.28 no.6
• /
• pp.107-118
• /
• 1995

Mathematical models have been developed in which storage-relaease processes of pollutants are modeled to explain storage effect of variations of flow and channel geometry on mixing and transport of polluted releases in natural channels including low flow conditions. The models were tested by using the laboratory dispersion data. Comparisons between concentration-time curves predicted by using the proposed model incorporating two different submodels show that Storage-Diffusion Model seems to be superior in explaining physical processes inside the storage zone to the Storage-Exchange Model even though accuracies of simulation results by two models are about the same. The proposed model shows significant improvement over the conventional one-dimensional dispersion model in predicting natural mixing processes in open channels.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.6
• /
• pp.101-109
• /
• 2012

Silt curtains are constructed for minimizing pollution of sediment dispersion in water bodies. In spite of wide uses of the silt curtains, there are few studies for analyzing the effectiveness of them with respect to their dimension and hydraulic characteristics. Currently, the market of silt curtains does not provide the various dimension of them due to the limit of information regarding its effectiveness on reducing sediment pollution. In this study, a series of experiments were conducted to investigate hydraulic characteristics around the silt curtains under the different flow conditions. For this study, a silt curtain was fabricated and an open channel with 30cm of width and 40cm of depth was used. The results indicated that the silt curtain was not effective in preventing dispersion at flow velocities over 0.5m/s in real conditions. Based on the experimental results, it is required that approaching velocity should be minimized and the weight of bottom be increased in order to reduce deformation. The results of this study will provide information required to design appropriate dimension of silt curtains in various water environment such as velocity and water depths.

• Water for future
• /
• v.29 no.6
• /
• pp.155-166
• /
• 1996

A finite element model for simulating gradually and rapidly varied unsteady flow in open channel is developed based on dynamic wave equation using Petrov-Galerkin method. A matrix stability analysis shows the selective damping of short wave lengths and excellent phase accuracies achived by Petrov-Galerkin method. Whereas the Preissmann scheme displays less selective damping and poor phase accuracies, and Bubnov-Galerkin method shows nondissipative characteristics whicn causes a divergence problem in short wave length. The analysis also shows that the Petrov-Galerkin method displays the desirable combination of selective damping of high frequency progressive waves over a wide range of Courant number and good phase accuracy at low Courant number. Therefore, the Petrov-Galerkin can be effectively applied to gradually and rapidly varied unsteady flow.

• Journal of Korea Water Resources Association
• /
• v.44 no.9
• /
• pp.731-740
• /
• 2011

An acoustic velocity profiler is developed, which is able to be used for open-channel flow measurement. It measures flow velocity based Doppler effect on acoustic signals, which is estimated by using pulse repetition frequency technique. Laboratory and field tests were made to verify velocity measuring performance of the developed device. It is confirmed that the acoustic velocity profiler can normally measure vertical velocity profile in the range above 0.1 m from the bottom and has equivalent performance to commercial acoustic velocity measuring devices.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.2
• /
• pp.125-132
• /
• 2009

Cylinder shaped air-breathing PEMFC has been developed to have small volume, low contact resistance and better air accessibility to the open cathode. This cylinder shaped design consists of an anode cylinder with helical flow channel and a cathode current collector with slits. The pressure distribution measurement according to the shapes was performed. The test result indicated that cylinder shaped fuel cell has better pressure distribution compared with the planar shaped fuel cell. The better pressure distribution was connected to the higher performance. The maximum power density of cylinder shaped fuel cell was about 20% higher than the planar shaped fuel cell. The maximum power density of the developed cylinder shaped air-breathing PEMFC with dry hydrogen was $220\;mW/cm^2$ and with humidified hydrogen was $293\;mW/cm^2$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.2
• /
• pp.205-211
• /
• 2018

Performance evaluation of a regenerative pump has been compared with a conventional open channel impeller and a S-shaped continuous impeller designed newly. To analyze flow field for both pumps, analysis code, CFX, is employed. Unstructured grids are used to represent a composite geometryincluding blade, casing and ducts. Throughout the comparisons between numerical simulation and experiments, the predicted efficiency has a good agreement with the experimental one. It is noted that the pump having a S-shaped continuous impeller is about 4.8 percent more efficient than conventional one, which is due to the relatively large pressure increase. Detailed flow field inside the pump is also analyzed and compared.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.536-543
• /
• 1984

Thermal structure of two-dimensional surface discharge of the heated water into a rectangular resesvoir is investigated by a laboratory simulation with a shallow open channel and a relatively large reservoir. Experimental study is focused on the nature of interfacial mixing between a flowing layer of the hot water and the underlying cold water. For various conditions, mean temperature field, surface velocity distribution and turbulent mixing process have been quantitatively observed. It is found that the Richardson number strongly affects the integral structure of the flow field, and the buoyancy plays a role to control the turbulent diffusion process.