• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.560-564
• /
• 2004

The optimal design and combustion analysis of the gas generator for Liquid Rocket Engine (LRE) were performed. A fuel-rich gas generator in open cycle turbopump system was designed for 10ton$_{f}$ in thrust with RP-1/Lox propellant. The optimal design was done for maximizing specific impulse of main combustion chamber with constraints of combustion temperature and power matching required by turbopump system. Design variables were selected as total mass flow rate to gas generator, O/F ratio in gas generator, turbine injection angle, partial admission ratio, and turbine rotational speed. Results of optimal design show the dimension of length, diameter, and contraction ratio of gas generator. Also, the combustion test was conducted to evaluate the performance of injector and combustion chamber. And the effect of the turbulence ring was investigated on the mixing enhancement in the chamber.r.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.34-37
• /
• 2010

One dimensional transient analysis was studied for turbopump-fed liquid propellant rocket engine(LRE) system in starting using AMESim. The effects of timing of gas generator fuel valve opening and gas generator ignition to start-up stability were researched for open cycle type system using LOX/RP-1 to propellants. Result show that the parameters and sequence on start-up should be considered to design optimized turbopump-fed LRE system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.61-64
• /
• 2017

The gas-generator open cycle is adapted for liquid rocket engine of Korea Space Launch Vehicle-II. The combustion instability can interfere with combustion performance and cause a noise and vibration or carry the potential for serious damage. This study introduces the experience cases of combustion instability in development of the gas generator for liquid rocket engine.

• Journal of Chest Surgery
• /
• v.27 no.2
• /
• pp.161-165
• /
• 1994

We have experienced a case of ventricular septal defect due to blunt chest trauma. A 22 year old male patient was admitted due to chest pain after Motor cycle accident on July 1st,1993. On 5th hospital day, sudden onset of dyspnea was noted and auscultation represented newly developed systolic murmur. A cardiac catheterization and Left ventriculogram revealed ruptured septum at the apical portion. Because there was open wound on anterior chest wall and congestive heart failure was medically controlled, the patient was discharged for elective operation. He was readmitted on August 14th, 1993.At operation, ventricular septal defect was found in apico-posterior muscular septal area, about 2.0 x 1.5 cm in size. The defect was repaired by double velour patch with interrupted suture and ventriculotomy was closed with Teflon felt. The patient`s postoperative course was uneventful and discharged 10 days postoperatively without complication. The patient have been followed up~ for 2 months. He is on functional class I with small amount of residual shunt at the ventricular septum.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.235-238
• /
• 2004

In the present study, the stability of turbopump through the rotor dynamics was analyzed with the location analysis method of the pole of characteristic equation for stability analysis of LRE and the design guideline for turbopump was presented according to design requirements of the LRE.

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.157-165
• /
• 2022

As the stock market is affected by various circumstances including economic and political variables, predicting the stock market is considered a still open problem. When combined with corporate financial statement data analysis, which is used as fundamental analysis, and technical analysis with a short data generation cycle, there is a problem that the time domain does not match. Our proposed method, LSTE the operating profit and market outlook of a petrochemical company and estimates the sales and operating profit of the company, it was possible to solve the above-mentioned problems and improve the accuracy of stock price prediction. Extensive experiments on real-world stock data show that our method outperforms the 8.58% relative improvements on average w.r.t. accuracy.

• International Journal of Computer Science & Network Security
• /
• v.24 no.6
• /
• pp.109-118
• /
• 2024

The world today is advancing towards a digital solution for every indusial domain varying from advanced engineering and medicine to training and management. The supply cycles can only be boosted via an effective management of the warehouse and a stronger hold over the logistics and inventory insights. RFID technology has been an open source tool for various MNCs and corporal organization who have progressed along a considerable drift on the charts. RFID is a methodology of analysing the warehouse and logistic data and create useful information in line to the past trends and future forecasts. The method has a high tactical accuracy and has been seen providing up to 99.57% accurate insights for the future cycle, based on the organizational capabilities and available resources. This paper discusses the implementation of RFID on field and provides results of datasets retrieved from controlled data of a practical warehouse and logistics system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1411-1415
• /
• 2008

The purpose of the present study was to determine the onset of breeding season, the occurrence of silent and true heats and the duration of estrus in female Markhoz goats of the Kurdistan province in Iran. Ten, 3 years-old Markhoz does with an average weight of $34.05{\pm}2.62kg$ and with one kidding record, were used. The goats were maintained in an open barn under constant nutritional levels and natural photoperiod. One aproned buck was used twice a day every 12 h to detect estrus from mid August to early January. For the determination of the onset of reproductive activity as well as occurrence of silent heat, blood samples were collected every 10 days, from the beginning of the experiment. After $2^{nd}$ standing heat, blood samples were obtained twice a week in order to assess luteal activity and the length of estrous cycles. In this study, estrous behavior was observed including sniffing, vocal exchange, following courtship, flehman, standing heat and mounting. The results of the progesterone assay indicated that in this goat silent heats occur mostly in the early breeding season. The first standing heat was observed in mid-October which was considered as the onset of the breeding season. Duration of the estrous cycle and estrus was recorded as being $20.93{\pm}1.56days$ and $38.86{\pm}15.19h$, respectively. The correlation coefficient between length of daylight and occurrence of estrus was negative (r = -0.470) but not significant (p>0.05). The data showed that there was no significant effect of body weight on estrous cycles (first, second and third) and estrous periods (first, second, third and fourth). Progesterone levels were not significantly different in the first, second and third estrous cycles at days 0, 4, 10, 12, 14 and 19. The results of progesterone assay during the estrous cycle indicate that follicular and luteal phases last 4-5 and 14-15 days, respectively and the concentration of serum progesterone in these phases was $0.88{\pm}0.08$ and $7.44{\pm}0.26ng/ml$, respectively. The study concluded that Markhoz does could be considered as a breed with a short breeding season and an optimal estrous activity in autumn.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.469-476
• /
• 2020

Research reactors in-core experimental facilities are designed to provide the highest steady state flux for user's irradiation requirements. However, fuel conversion from highly enriched uranium (HEU) to low enriched uranium (LEU) driven by the ongoing effort to diminish proliferation risk, will impact reactor physics parameters. Preserving the reactor capability to produce the needed flux to perform its intended research functions, determines the conversion feasibility. This study investigates the neutron flux in the central experimental facility of two material test reactors (MTR), the IAEA generic10 MW benchmark reactor and the 22 MW s Egyptian Test and Research Reactor (ETRR-2). A 3D full core model with three uranium enrichment of 93%, 45%, and 20% was constructed utilizing the OpenMC particle transport Monte Carlo code. Neutronics calculations were performed for fresh fuel, the beginning of life cycle (BOL) and end of life cycle (EOL) for each of the three enrichments for both the IAEA 10 MW generic reactor and core 1/98 of the ETRR-2 reactor. Criticality calculations of the effective multiplication factor (K_eff) were executed for each of the twelve cases; results show a reasonable agreement with published benchmark values for both reactors. The thermal, epithermal and fast neutron fluxes were tallied across the core, utilizing the mesh tally capability of the code and are presented here. The axial flux in the central experimental facility was tallied at 1 cm intervals, for each of the cases; results for IAEA 10 MW show a maximum reduction of 14.32% in the thermal flux of LEU to that of the HEU, at EOL. The reduction of the thermal flux for fresh fuel was between 5.81% and 9.62%, with an average drop of 8.1%. At the BOL the thermal flux showed a larger reduction range of 6.92%-13.58% with an average drop of 10.73%. Furthermore, the fission reaction rate was calculated, results showed an increase in the peak fission rate of the LEU case compared to the HEU case. Results for the ETRR-2 reactor show an average increase of 62.31% in the thermal flux of LEU to that of the HEU due to the effect of spectrum hardening. The fission rate density increased with enrichment, resulting in 34% maximum increase in the HEU case compared to the LEU case at the assemblies surrounding the flux trap.

• Korean Journal of Remote Sensing
• /
• v.13 no.1
• /
• pp.1-12
• /
• 1997

The western equatorial Pacific Ocean, where sea surface temperature is the warmest on the globe, is characterized by numerous convective systems and large annual precipitation. In this region, the cloudiness data with tops higher than 8km level obtained from the GMS-IR data are used to investigate the diurnal variation of cloudiness. The amplitude and phase of diurnal and semi-diurnal cycles are mainly investigated to examine details on the temporal and spatial structure of clouds. Cloudiness variation has typical cycles and each cycle is associated with the air-sea interactive phenomena. Spectral analysis on the cloudiness time series data indicates that 30-60 day, 17-20day, 7-8 day, diurnal and semi diurnal cycle are peaked. During Northern Winter and Southern Summer, the large cloudiness exsists over New Guinea, the adjacent seas of North Australia, and the open oceanic regions east of $160^{\circ}$E. Cloudiness diurnal variability over the lands and their adjacent seas is about 2.0 times larger than that over the open sea regions. That may be due to the difference of specific heat between the land and sea. The maximum and minimum cloudiness appeared at 18:00 and 09:00 hours over the land, and at noon and 21:00 hours over the sea, respectively. The amplitude of diurnal component over the land is 4,7 times larger than that of semi-diurnal component, and 1.5 times over the sea.