• The Bulletin of The Korean Astronomical Society
• /
• 제43권1호
• /
• pp.63.3-63.3
• /
• 2018

A comparison study between two low temperature opacity tables has been conducted. The opacity is the one of the major input physics in stellar model construction. Opacity is generally provided in a tabular form and as a function of 3 parameters, ie, density, temperature and chemical composition. Among available opacity tables, it has been common practice to utilize OPAL opacity table (Iglesias & Rogers, 1996) augmented with Ferguson opacity table (Ferguson et al. 2005) for the low temperature domain. For low temperature domain, another table, AESOPUS (Marigo & Aringer, 2009), has been announced in 2007. Reportedly, this opacity covers even lower temperature region, and is compatible with that of Ferguson in the overlapping temperature domain. To test the compatibility, stellar models and isochrones for various ranges in mass, metallicity and chemical composition, have been constructed. It is confirmed that there is no significant difference in the stellar models and isochrones constructed with the two different low temperature opacities. Therefore, in the construction of stellar models and isochrones, Ferguson low temperature opacity can be replaced with the AESOPUS opacity. The wider range in the temperature and chemical mixtures, and the easier accessibility make AESOPUS favorable in practical purpose.

• Journal of Preventive Medicine and Public Health
• /
• 제22권1호
• /
• pp.81-89
• /
• 1989

The authors investigated mortality rate of hospitalized CWP(coal workers' pneumoconiosis) patients. Date, which was composed of age, date of hospitalization, date of death, and radiological findings(profusion of small opacity, type of large opacity, tuberculosis, emphysema, pneumothorax, and cardiac abnormality), was gathered from medical charts and chest x-ray films at the time of hospitalization of CWP patients. Among 738 CWP patients, that were entered survey differently and have followed different period, 160 CWP patients were died during different observational period. Mean value of observational period was 203 weeks, and mean age at hospitalization was 51 years. Because of short observational period, mean survival time could not found. There was statistically significant difference of mortality rate between group of small opacity and that of large opacity. In group of small opacity 5 year survival rate was 0.80 and in group of large opacity that was 0.73. And 80 percentile survival time was 57 months in group of small opacity and that was 40 months in group of large opacity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제32권1호
• /
• pp.1-9
• /
• 2000

This study was carried out to improve the opacity of printing paper. Conventional filler loading enhanced the opacity of paper, but subsequently caused reduction of paper strength of paper. We try to seek a new filler loading method so-called beater loading that enhances opacity of paper as well as sustained desire strength. In our experiment, comparing to direct loading method, the beater loading method enhanced 0.8% of opacity and 0.2% of brightness. This also decreased the rates of strength reduction of paper. Therefore, the results obtained in this study indicated that beater loading was a very effective method to improve the opacity of paper while not to decreased so much of paper strength.

• Journal of Preventive Medicine and Public Health
• /
• 제22권3호
• /
• pp.323-327
• /
• 1989

Carbon monoxide diffusing capacity(DLco) was evaluated before and after nifedipine administration in coal workers' pneumoconiosis by the size of radioopacity. Nifedipine was administered to 18 men and 17 men of small round opacity group and large opacity group respectively. Placebo was administered to 19 men and 15 men of small and large opacity group respectively. In large opacity group DLco was increased after nifedipine administration. But, it was not significant statistically(0.05

• The Journal of Asian Finance, Economics and Business
• /
• 제7권1호
• /
• pp.9-17
• /
• 2020

This study examines the effect of financial reporting opacity and audit quality on stock price crash risk using listed firms in Japan. This study is the first research to examine the effect of financial reporting opacity on crash risk using a Japanese listed company. Furthermore, the effect of audit quality on crash risk is verified. High level auditors can mitigate crash risk by playing a role as a corporate governance device mechanism to reduce agency costs. We use a logistic regression and linear regression model to test whether financial reporting opacity and audit quality affect crash risk using listed firms in the Japanese stock exchange market during the fiscal years 2015 January through 2017 February. The results of this study suggest that the financial reporting opacity variable shows a positive relationship with CRASH, which states that a firm with more opaque financial reporting increases crash risk. The results suggest also that the firms audited by Big4 auditors experience less crash risk, implying that the audit quality in Japan can be one of the factors mitigating firm's crash risk. This study provides implications for financial reporting and audit quality to external stakeholders who wants to avoid losses.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.215-226
• /
• 1993

Color stability of tooth colored restorative resins is an important factor, particularly in anterior teeth restoration. The purpose of this study was to evaluate the color stability and opacity change of several light curing composite resins. Specimens of eight composite resins(Prisma AP. H., Brilliant Enamel, Charisma, Durafil, Helio Progress, Herculite XR, P-50 and Silux Plus) were divided into two groups : In Group 1, the specimens were polymerized by visible light curing unit for 60 seconds on both sides and in Group 2, the post-cured specimens were heat tempered by light/heat curing unit for 45 units(about 18 min.). All specimens were stored in distilled water at $60^{\circ}C$ for 30 days. The color characteristics($L^*,a^*,b^*$) and opacity of the specimens before and after immersion were measured by spectrocolorimetry and the total color difference(${\Delta}E^*$) and opacity change (${\Delta}Y%$) were computed. The results obtained were as follows : 1. SP and APH in both groups, DF, HP and HXR in Group 1 showed ${\Delta}E^*$-value above 2.0. 2. DF, HP, SP and HXR in Group 1 showed higher ${\Delta}E^*$-value than in Group 2, but the others had no significant difference. 3. The opacity of CH and HXR in Group 1, and of CH and BE in Group 2 decreased after immersion, while that of the others increased. 4. Opacity change of BE, P50 and HXR was significantly different between Group 1 and 2. These results suggest that color change in the post-cure heat tempered specimens by light/heat curing unit was smaller than that of the specimens polymerized by visible light curing unit. No clinically detectable opacity changes were noted for any materials in either goup.

• Imaging Science in Dentistry
• /
• 제39권1호
• /
• pp.13-18
• /
• 2009

Purpose: This study was designed to determine a proper threshold value and opacity in three-dimensional CT volume rendering of oral and maxillofacial area. Materials and Methods: Three-dimensional CT data obtained from 50 persons who were done orthognatic surgery in department of oral and maxillofacial radiology of Seoul National University retrospectively. 12 volume rendering post-processing protocols of combination of threshold(100HU, 150HU, 221HU, 270HU) and opacity (58%, 80%, 90%) were applied. Five observers independently evaluated image quality using a five-point range scale. The results were analyzed by receiver operating characteristic curves, ANOVA and Kappa value. And three oromaxillofacial surgeons chose the all images that they thought proper clinically in the all of images. Results: Analysis using ROC curves revealed the area under each curve which indicated a diagnostic accuracy. The highest diagnostic accuracy appear with 100HU and 58% opacity. and the lowest diagnostic accuracy appear with 221HU and 58% opacity that are being used protocol in department of oral and maxillofacial radiology of Seoul National University. But, no statistically significant difference was noted between any of the protocols. And the number of proper images clinically that chosen by three oromaxillofacial surgeons is the largest in the cases of protocol 8 (221HU, opacity 80%) and protocol 11 (270HU, opacity 80%) in one after the other. Conclusion: Threshold and opacity in volume rendering can be controled easily and these can be causes of making an diagnostic accuracy. So we need to select proper values of these factors.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제41권5호
• /
• pp.33-37
• /
• 2009

Hanji is a traditional Korean handmade paper, made of bast fibers of the paper mulberry. Its fiber furnish is much more expensive than wood fiber furnish. Hanji with a low basis weight requires additional opacity and smoothness for better writing and printing. Filler such as calcium carbonate can not be used to raise the opacity of Hanji because of its low retention in low basis weight paper and the high freeness of the Hanji fiber furnish. Addition of red algae pulp, which is prepared from marine red algae to the Hanji fiber furnish negated retention problems happening in the case of mineral filler addition, and produced a substantial improvement in the opacity and smoothness of Hanji. The higher retention was due to the much larger size of the red algae fibers compared to the mineral fillers. The improvement in opacity and smoothness were also due to the shape of the red algae fibers: that red algae fibers are narrower in widths and shorter in lengths than wood fibers results in increased surface area and smoothness.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.423-433
• /
• 2016

In this paper, we consider the cybersecurity issue of ship information system (SIS) from a new perspective which is called opacity. For a SIS, its confidential information (named as "secret") may be leaked through the working behaviors of each Distributed Control Unit (DCU) from an outside observer called an "intruder" which is able to determine ship's mission state by detecting the source of each data flow from the corresponding DCUs in SIS. Therefore we proposed a dual layer mechanism to enforce opacity by activating non-essential DCU during secret mission. This mechanism is calculated by two types of insertion functions: Safety-assured insertion function ($f_{IS}$) and Admissibility-assured insertion function ($f_{IA}$). Due to different objectives, $f_{IS}$ is designed to confuse intruder by constructing a non-secret behaviors from a unsafe one, and the division of $f_{IA}$ is to polish the modified output behaviors back to normal. We define the property of "$I_2$-Enforceability" that dual layer insertion functions has the ability to enforce opacity. By a given mission map of SIS and the marked secret missions, we propose an algorithm to select $f_{IS}$ and compute its matchable $f_{IA}$ and then the DCUs which should be activated to release non-essential data flow in each step is calculable.