• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8365-8370
• /
• 2016

Background: Shammah is a traditional form of snuff dipping tobacco (a smokeless tobacco form) that is commonly used in Yemen. Oral mucosal changes due to the use of shammah can usually be observed in the mucosal surfaces that the product touches. The aim of this study was to determine the association between shammah use and oral leukoplakia-like lesions. Other associated factors were also determined. Materials and Methods: A cross sectional study was conducted on 346 randomly selected adult males. Multi-stage random sampling was used to select the study location. After completing the structured questionnaire interviews, all the participants underwent clinical exanimation for screening of oral leukoplakia-like lesions Clinical features of oral leukoplakia-like lesion were characterized based on the grades of $Ax{\acute{e}}ll$ et al (1976). Univariable logistic regression and multivariable logistic regression were used to assess the potential associated factors. Results: Out of 346 male participants aged 18 years and older, 68 (19.7%) reported being current shammah users. The multivariable analysis revealed that age, non-formal or primary level of education, former shammah user, current shammah user, and frequency of shammah use per day were statistically associated with the presence of oral leukoplakia-like lesions [Adjusted odds ratio (AOR) = 1.03; 95% confidence interval (CI) : 1.01, 1.06; P=0.006], (AOR=8.65; 95% CI: 2.81, 26.57; P=0.001), (AOR=3.65; 95% CI: 1.40, 9.50; P=0.008), (AOR=12.99; 95% CI: 6.34, 26.59; P=0.001), and (AOR=1.17; 95% CI: 1.02, 1.36; P=0.026), respectively. Conclusions: The results revealed oral leukoplakia-like lesions to be significantly associated with shammah use. Therefore, it is important to develop comprehensive shammah prevention programs in Yemen.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.23 no.2
• /
• pp.85-94
• /
• 2010

Purpose: This study aimed to investigate a clinical effect of Coo-Sun activity focusing on improvement of quality of life in female cancer patients. Methods: The subject of study consisted of 5 female cancer patients at the East-West Cancer Center of OO Oriental hospital. The survey methods of this study are Functional Assessment of Cancer Therapy-General (FACT-G) and State-Trait Anxiety Inventory (STAI). Patients performed Coo-Sun activity 6 times a week and filled out FACT-G and STAI questionnaire after every 3 times training. Results: In FACT-G questionnaire, physical well-being and emotional wellbeing was improved significantly after Coo-Sun activity. And change of social/family well-being and functional well-being score were not significant statistically. In STAI questionnaire, STAI1 was improved significantly after Coo-Sun activity. And change of STAI2 score was not significant statistically. Conclusion: After Coo-Sun activity, quality of life (QOL) in female cancer patients was improved and anxiety was decreased. But this study have limitation to prove effects of Coo-Sun activity completely in female cancer patients. So well designed prospective cohort study will be needed to prove its benefits.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1067-1073
• /
• 1998

High quality diamond films of the silicon on diamond (SOD) structure are deposited using CO and $H_2$ gas mixture in microwave plasma chemical vapor deposition (CVD), a SOD structure is fabricated using low pressure CVD polysilicon on diamond/ Si(100) substrate. The crystalline structure of the diamond films which composed of { 111} and {100} planes. were changed from octahedral one to cubo-octahedron one as the CO/$H_2$ ratios are increased. The high quality diamond films without amorphous carbon and non-diamond elements were deposited at the CO/$H_2$ flow rate of 0.18. and the main phase of the diamond films shows (111) plane. The diamond/Si(lOO) structure shows that the interface is flat without voids. The measured dielectric constant. leakage current and breakdown field were $5.31\times10^{-9}A/cm^2$ and $9\times{10^7}{\Omega}cm$ respectively.

• Composites Research
• /
• v.31 no.1
• /
• pp.23-29
• /
• 2018

The RFI process can be applied to very thick structures without limiting the resin viscosity. When the proper thickness of the resin film cannot be set, the resin film creates either the non-impregnated section or the excessive resin contents and this leads to the deterioration of mechanical properties. Therefore, this study proposed a method for setting the resin film thickness in the RFI process. The fiber compaction behavior test was proposed by setting the proper resin film thickness and the properties of composites were evaluated through short beam shear strength test, compression test and porosity measurement to verify the proposed method. The evaluation of physical properties of composites was conducted and an appropriate level of resin film thickness was found based on the results of fiber compaction behavior test.

• Journal of Oriental Neuropsychiatry
• /
• v.20 no.2
• /
• pp.229-242
• /
• 2009

Objectives : This article aims to find how effective the art therapy is on the improvement of the self expression and the interpersonal relations with others, as medium for verbal communication of schizophrenic patients. Methods : The subject of this study was one schizophrenic patient who had been treated with drugs for five years in W university hospital, as well as counseled by an art therapy oo counsel office in J city. The art therapy had been performed the total 25 sessions, fifty minute per session, one session per week, from November 28 in 2008 to April 27 in 2009. The test was by HTP. Results : The results of this study are as follows: First, in the pretest of HTP, the subject showed a little lethargy, painting very simple house-shaped figures and too simple rectangular figures corresponding to those painted by 4 or 5-year-old children. In the post-test, however, the structures of houses were described concretely and three-dimensionally, and the descriptions of people were changed into concrete figure, by which we could see the improvement effect on the self expression and the interpersonal relations. Second, in the earlier stage, there was little verbal self expression, and little self respect, staring into space and showing passive attitude without positive assertion and expression. In the later stage, however, there were positive assertion and expression, even showing sense of humor. Lastly, in the earlier stage, there were few interpersonal relations. In the later stage, however, eye contacts and the interpersonal relations were increased during conversation and in the art work process, respectively. Conclusions : These results suggest that the art therapy can be effective on improvement of the self expression and the interpersonal relations with others, as medium for verbal communication of schizophrenic patients.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.44-44
• /
• 1998

It was observed that the friction coefficient decreased with increasing Si concentration in the l ilms. Furthermore, the friction behavior became more s때ble even when very small amount of S Si of less than 0.5 at. % was incorporatA:회 By analyzing the composition of the debris f formed, we could show that the low and stabilized friction coefficient is in마nately relatA:었 w with the formation of the Si rich oxide debris. These result supports the mechanism that the h hydrated silica debris is the reason for low friction coefficient in humid environment. Second e evidence of the role of Si rich oxide debris could be found in the triOO-chemical reactions d during initial stage of triho-test. When the Si concen$\sigma$ation was less than 5 at.%, initial t transient period of high friction coefficient was commonly observed. Mter the transient period, m the friction coefficient becomes lower with increasing contact cycles. The initial $\sigma$ansient p peri여 becomes shorter and the starting and maximum friction coefficients in $\sigma$ansient 야,riod d decreased with increasing Si concentration. Composition of the debris on the wear scar s surface was analyzed by Auger spe따'Oscopy at v뼈ous stages in the initial transient period. W We observed that when the friction coefficient increased in earlier stage of the $\sigma$'ansient p period, iron and oxygen was observed in the debris. However, decrease in the 당iction c coefficient in the later stage of the transient period was associated with the formation of s silicon rich oxide debris. This result also supports the friction mechanism of Si-DLC films t that the formation of Si rich oxide debris results in low friction coefficient in ambient a atmosphere. atmosphere.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.239-246
• /
• 2005

Some characteristics of two forms of glucoamylase (glucan 1 A-$\alpha$-glucosidase, EC 3. 2. I. 3) purified from Aspergillus coreanus NR 15-1 were investigated. The enzymes were produced on a solid, uncooked wheat bran medium of A. coreanus NR 15-1 isolated from traditional Korean Nuruk. Two forms of glucoamylase, GA-I and GA-II, were purified to homogenity after 5.8-fold and 9.6-fold purification, respectively, judged by disc- and SDS-polyacrylamide gel electrophoresis. The molecular mass of GA-I and GA-II were estimated to be 62 kDa and 90 kDa by Sephadex G-1OO gel filtration, and 64 kDa and 91 kDa by SDS-polyacrylarnide gel electrophoresis, respectively. The optimum temperatures of GA-I and GA-II were 60$^circ$C and 65$^circ$C, respectively, and the optimum pH was 4.0. The activation energy (Ea value) of GA-I and GA-II was 11.66 kcal/mol and 12.09 kcal/mol, respectively, and the apparent Michaelis constants (K_{m}) of GA-I and GA-II for soluble starch were found to be 3.57 mg/ml and 6.25 mg/ml, respectively. Both enzymes were activated by 1 mM Mn^{2+} and Cu^{2+}, but were completely inhibited by 1 mM N­bromosuccinimide. The GA-II was weakly inhibited by 1 mM p-CMB, dithiothreitol, EDTA, and pyridoxal 5-phosphate, but GA-I was not inhibited by those compounds. Both enzymes had significant ability to digest raw wheat starch and raw rice starch, and hydrolysis rates of raw wheat starch by GA-I and GA-II were 7.8- and 7.3-fold higher than with soluble starch, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.441-454
• /
• 2008

Shipyard design and equipments layout problem, which are directly linked with the productivity of ship production, is an important issue serving as reference data of production plan for later massive production of ships. So far in many cases, design of a shipyard has been relying on the experienced engineers in shipbuilding, resulting in sporadic and poorly organized processes. And thus, economic losses as well as trials and errors in that accord have been pointed out as inevitable problems. This paper extracts a checklist of major elements to fine tune the shipbuilding yard designing process and the input/output data based on the simulation based shipbuilding yard layout designing framework and methodology proposed in existing researches, and executed initial architecture to develop software that integrates all the relevant processes and designing tools. In this course, both user request and design data by the steps are arranged and organized in the proposed layout design template form. In addition, simulation is done based on the parent shipbuilding process planning and scheduling data of the ship product, shipbuilding process and work stage facilities that constitute shipbuilding yard, and design items are verified and optimized with the layout and equipment list showing optimal process planning and scheduling effects. All the contents of this paper are based on simulation based shipbuilding yard layout designing methodology, and initial architecture processes are based on object oriented development methodology and system engineering methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.254-266
• /
• 2006

Recently, researches about downlink resource allocation algorithms applying SDMA to enhance the system throughput and cell coverage have begun. Most OFDM/SDMA based resource allocation algorithms have some limitations such that those only concentrate on maximizing the system throughput or can be applied in single cell environment. In this paper, we propose an OFDM/SDMA based downlink resource allocation algorithm which considers high layer QoS parameters suitable for the required data traffic and it also minimizes the system throughput loss and considers inter-cell interference from adjacent cells. so it can be adopted in multi-cell environment. We manifest the performance of the proposed algorithm in Ped A and SCME MIMO Channel Model.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.719-720
• /
• 2007

Korea, for the first time in the world, constructed 765 kV double circuits transmission lines, which has 3 phases and 6 bundles with vertical arrangement using steel pipes in 1998. Also in 2002, we developed 765kV outdoor full GIS substation with self-developed technology. KEPCO accumulated a wealth of technologies for 765kV system construction and operation, and are listed 5th in technology field in the world. With this advanced technologies, we are developing oversea business. We started with a projects, 'Development Study on the Power System Network Analysis in Myanmar' in 2001, and continued the project to transmission design, consulting for transmission technology including the education of foreign trainees in south-east and middle east asia. Currently, 12 overseas businesses including 330kV transmission system consulting in Ghana, are in progress. In 2007, beginning with 750 kV transmission consulting in China, we are operating ATT(Advanced Transmission Technology) training program, which educate engineers of government and utilities company from China, Myanmar, Cambodia, Laos and Cambodia. However, for the successful development study on the power system, design of the power system and the training service, it is essential to standardize load design criteria in consideration of temperature, wind speed, air pressure and density, etc. of the other countries. Therefore, in this paper, standardized load design criteria for Cambodia, Laos, Myanmar is explained.