• Korean Membrane Journal
• /
• v.3 no.1
• /
• pp.9-16
• /
• 2001

The diamide-diamine having carboxylic acid was prepared by direct condensation of 1,2,4-benzenetricarboxylic acid with bits[4- (3-aminophenoxy ) phenyl] sulfone and bits(4-aminouhenyl)-1,4- diisopropylbenzene in medium consisting of triphenylphosphite, LiCl, and N-methyl-2-pyrrolidone. Copoly (amide-imide) derivatives with high molecular weight could be synthesized by one-step polycondensation of prepared diamide-diamine having carboxylic acid and various dianhydride compounds. Depending on the chemical structure and composition of polymer backbones, the viscosities of polymers were found to range between 0.87∼ 1.57 dL/B. All the polymers showed good thermal stability up to 320$\^{C}$ and the 10% weight loss temperature was observed in the range of 450∼540$\^{C}$ in a thermogravimetric traces. The glass transition was recorded in the temperature range of 200 ∼ 270$\^{C}$. All the polymers showed an amorphous nature on a differential scanning calorimetric thermograms. These polymers generally had good mechanical properties and readily soluble in various polar solvents. Further, it was proved that their properties could be determined from the composition.

• Parasites, Hosts and Diseases
• /
• v.50 no.4
• /
• pp.361-364
• /
• 2012

The mature cyst of Acanthamoeba is highly resistant to various antibiotics and therapeutic agents. Cyst wall of Acanthamoeba are composed of cellulose, acid-resistant proteins, lipids, and unidentified materials. Because cellulose is one of the primary components of the inner cyst wall, cellulose synthesis is essential to the process of cyst formation in Acanthamoeba. In this study, we hypothesized the key and short-step process in synthesis of cellulose from glycogen in encysting Acanthamoeba castellanii, and confirmed it by comparing the expression pattern of enzymes involving glycogenolysis and cellulose synthesis. The genes of 3 enzymes, glycogen phosphorylase, UDP-glucose pyrophosphorylase, and cellulose synthase, which are involved in the cellulose synthesis, were expressed high at the 1st and 2nd day of encystation. However, the phosphoglucomutase that facilitates the interconversion of glucose 1-phosphate and glucose 6-phosphate expressed low during encystation. This report identified the short-cut pathway of cellulose synthesis required for construction of the cyst wall during the encystation process in Acanthamoeba. This study provides important information to understand cyst wall formation in encysting Acanthamoeba.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1012-1020
• /
• 2009

We developed an efficient three-step synthetic protocol of $\gamma$-hydroxybutenolides starting from the Baylis-Hillman adducts: (i) bromination, (ii) Barbier reaction and (iii) one-pot $K_2CO_3$-mediated synthesis of $\gamma$-hydroxybutenolides. In addition, we showed the synthetic applicability of butenolides including self-dimerization, conjugate addition reaction, and alkylations.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.2
• /
• pp.219-224
• /
• 1991

New binuclear Ni(Ⅱ) and Cu(Ⅱ) complexes with various alkyl derivatives of 1,2-bis(1,3,6,8,10,13-hexaaza-1-cyclotetradecyl) ethane, in which two fully saturated 14-membered hexaaza macrocyclic subunits are linked together by an ethylene chain, have been synthesized by the one step template condensations of formaldehyde with ethylenediamine and appropriate primary alkyl amines in the presence of the metal ions. Each macrocyclic subunit of the double-ring macrocyclic complexes contains one alkyl pendant arm and has a square planar geometry with a 5-6-5-6 chelate ring sequence. The visible spectra and oxidation properties indicate that the metal-metal interaction of the binuclear complexes are not significant. Synthesis, characterization, and the properties of the complexes are presented.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.431-435
• /
• 2012

Aluminum containing mesoporous molecular sieves Al-SBA-1 ($n_{Si}/n_{Al}$= 2, 5, 10, 15) was synthesized with a one-step method, and the catalyst was characterized with powder X-ray diffraction (XRD), nitrogen adsorption-desorption, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Finally, we studied the catalytic activities of Al-SBA-1 molecular sieves in Pechmann reaction of 3-methoxyphenol and Ethyl acetoacetate to get 7-methoxy-4-methyl coumarin. Four parameters reaction temperature, time, catalyst weight and reactants ratio were optimized.

• Journal of Sensor Science and Technology
• /
• v.26 no.2
• /
• pp.73-78
• /
• 2017

A tetrode is one of the neural electrodes, and it is widely used to record neural signals in the brain of a freely moving animal. The impedance of a neural electrode is an important parameter because it determines the signal-to-noise ratio of the recorded neural signals. Here, we developed a modification technique using carbon nanotube-polypyrrole composite nanostructures to decrease the impedances of tetrodes. The synthesis of the carbon nanotube and polypyrrole nanostructures was performed in two steps. In the first step, randomly dispersed carbon nanotubes and pyrrole monomers were gathered and aligned on the tetrode electrode. Next, they were electro-polymerized on the electrode surface. As the applied time (step-1 and step-2) and the offset voltage increased, the impedances of the tetrodes decreased. The modification technique is, therefore, an important and useful of lowering the impedances of tetrodes.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.5
• /
• pp.320-327
• /
• 2023

In this study, the nickel hydroxide (Ni(OH)₂) electrode for supercapacitor was prepared via hydrothermal method. Based on the nickel (Ni) foam, the electrode does not require any additional binder material or post-processing. Nickel nitrate (Ni(NO₃)₂) and hexamethylenetetramine (C₆H₁₂N₄) were used for synthesis, and the synthesis condition was 12 hours at 80 ℃. X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM) were used to analyze the structural characteristics of the electrode, and it shown that the nickel hydroxide was successfully prepared after only the one-step hydrothermal synthesis. The electrochemical properties were analyzed through the half-cell test. The prepared electrode shown a pair of oxidation/reduction peaks, indicating that the driving method included the redox reaction on the electrode surface. After the charge/discharge test, the specific capacitance was calculated as the value of 438 F/g at 3 A/g.

• Advances in concrete construction
• /
• v.15 no.1
• /
• pp.41-46
• /
• 2023

Sport has no age limit and can be done anywhere and in any condition with minimal equipment. The existence of sports spaces in all parts of the world is considered a citizen's right. One of the activities carried out in this field is installing sports equipment and structures in parks and encouraging citizens to use this equipment for physical health with the least cost and facilities. Installing sports structures in open spaces such as parks is a practical step for developing citizens' sports. Although using devices in parks is acceptable, it is more critical to meet scientific and technical standards. The components of these structures must have high strength and endurance against changes in environmental conditions such as humidity, temperature difference, and corrosion. Among the various causes of material degradation, corrosion has always been one of several fundamental causes of metal equipment failure. Sports structures in open spaces are not safe from corrosion. Uniform corrosion is the most common type of corrosion. This corrosion usually occurs uniformly through a chemical or electrochemical reaction across the surface exposed to the corrosive environment. Rust and corrosion of outdoor sports structures are examples of this corrosion. For this reason, in this research, with the green synthesis of silica nanoparticles and its application in outdoor sports structures, the life span of these structures can be increased for the use of physical exercises as well as their quality.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.399-399
• /
• 2008

Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.

• Journal of Aerospace System Engineering
• /
• v.8 no.3
• /
• pp.27-33
• /
• 2014

The CubeSat, which was first launched to verify new technologies and for educational purposes, is now widely used as an educational tool since it makes possible development of manpower through practical training to produce the satellite at low development costs. At present, research and development on the CubSat is rapidly expanding in domestic and foreign universities. As one of the final 3 teams selected in the 2013 CUBE SATELLITE CONTEST organized by the Ministry of Science, ICT and Future Planning, Chosun University is also currently conducting R & D of STEP Cube Lab, which is a CubeSat scheduled to be launched in 2015 and whose main task is to verify space-based technologies in orbit. The present paper tries to present an overview of the CubeSat of Chosun University whose development is being led by its undergraduate students, and further, introduce the strengths of the present development program for developing space experts, based on the educational achievements from the R & D.