• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.51-58
• /
• 2007

This paper presented an adaptive pipeline architecture for a high-performance and low-power asynchronous processor. The proposed pipeline architecture employed a stage-skipping and a stage-combining scheme. The stage-skipping scheme can skip the operation of a bubble stage that is not used pipeline stage in an instruction execution. In the stage-combining scheme, two consecutive stages can be joined to form one stage if the latter stage is empty. The proposed pipeline architecture could reduce the processing time and power consumption. The proposed architecture supports multi-processing in the EX stage that executes parallel 4 instructions. We designed an asynchronous microprocessor to estimate the efficiency of the proposed pipeline architecture that was synthesized to a gate level design using a $0.35-{\mu}m$ CMOS standard cell library. We evaluated the performance of the target processor using SPEC2000 benchmark programs. The proposed architecture showed about 2.3 times higher speed than the asynchronous counterpart, AMULET3i. As a result, the proposed pipeline schemes and architecture can be used for asynchronous high-speed processor design

• Water for future
• /
• v.26 no.1
• /
• pp.93-101
• /
• 1993

Because of the Keumkangsan-Dam and the Peace-Dam constructed in recent years, it is expected that the peak flood discharge and the peak flood stage at the Hwachun-Dam site have been changed. In this study, two methods were used to simulate and compare the effects of the upstream dam construction on the change of the discharge and the stage. One is the storage function method widely used for the hydrological routing in this country. The other is the DWOPER (Dynamic Wave Operational Model) package developed by the U.S. NWS for the hydraulic routing. Flood routing simulations have been performed on four different scenarios:1) Before the construction of the Keumkangsan-Dam and the peace-Dam, 2) The exclusion of the Keumkangsan-Dam watershed (before the construction of the Peace-Dam), 3) The exclusion of the Keumkangsan-Dam watershed (after the construction of the Peace-Dam), 4) The exclusion of the Peace-Dam watershed. The results of the four test cases from the two methods show that the peak flood discharge and the peak flood stage at the Hwachun-Dam site are reduced due to the construction of the Peace-Dam. From these findings, it is suggested that the operational criteria for the optimal dam-operation of the hwachun-Dam need to be modified.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.525-530
• /
• 2023

Although double-stage hanger is used in many homes for its space utilization and ease of installation, it is inconvenient for users to take off clothes hung on the upper bar due to its high height. Therefore, this paper proposes a new type of double-stage hanger that allows users to easily hang or take out clothes hung on the upper bar while maintaining the function of the existing double-stage hanger. 4-bar link mechanism is applied so that the upper bar can come down to a convenient height with one operation. In addition, an appropriate link shape, length, and joint type are selected so that the height is adjusted three-dimensionally to prevent overlapping of clothes hanging on upper/lower bars. FEA analysis is performed to ensure that the presented hanger shape can support the load of clothes during height adjustment and the feasibility of the three-dimensional height adjustment hanger is verified through fabrication.

• Journal of Korea Port Economic Association
• /
• v.19 no.2
• /
• pp.87-109
• /
• 2003

Localization is one of the typical phenomena of this age in Korea. Localization of Port is on the beginning in this Country as the introduction of Port Authority in the Port of Busan and Incheon. As the condition of world trade has been changed, the level of Competition among Ports is severer than before, especially in the East Asia Area. Since many experts of Port say that centralized control system of Port has many Problems, some other Port Control system has been studied and suggested for long time. One of the Countermeasures of these Port Problems is Port Authority System which aims the balance of central and local development. Port Authority System does not want to achieve only Public Duty or Utility but also Commerciality which is fundamentally very important for the survival of Port. In this Paper, the necessities of Port Authority Introduction in Korea was explained. And Port Authority System will be introduced 2004 year in Busan Port firstly and Incheon Port, secondly. The Main Contents of Port Authority System was suggested , in this Paper and some Problems which shall be considered for better operation of Port Authority System was investigated. I suggested some countermeasures, endeavoring the competitive advantage of Port and higher Port Performance, in terms of 3 Dimensions. One is in the side of basic Policy Directions, the other is the activation schemes of functional department which composed of many activities of Port Authority System and the third is in the side of operation body. As this paper, however, has some limitations and Port Authority System is just beginning stage, future research shall be continued in real and concrete level.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.37-47
• /
• 2013

Due to the evolution of war fields to the net-centric one, weapon systems have become very complex in terms of both mission capability and implementation scales. In particular, the net-centric war field is characterized by a set of interconnected and independently operable weapon systems. As such, the individual weapon systems are required to meet the interoperability and thus, assuring it has been becoming more crucial even in the early stage of development. Furthermore, the ever-growing complexity of the weapon systems has attracted a great deal of attention on the safety issues in the operation and development of weapon systems. The objective of the study is on how to assure the interoperability for safety-critical weapon systems while maintaining system complexity. To do so, the approach taken in the paper is to consider the interoperability from the early stage of the development. Specifically, the required functions to satisfy the interoperability are developed first. The functions are then analyzed in order to link the safety requirements to the reliability evaluation, which results in the study of quantifying the effects of the safety requirements on the system as a whole. As a result, we have developed a methodology and procedure on how to assure interoperability while applying the safety requirements in the weapon systems development.

• Economic and Environmental Geology
• /
• v.40 no.6
• /
• pp.797-804
• /
• 2007

This study was carried out to analyze public recognition of geo-technology and its outcome. On the basis of the study, the task of PR/communication to promote status of geo-technology and the PR program by stage(SMTCR) for strategy of geo-technology outcome were suggested as follows; operation of PR committee and plus-one appraisal system on a sender scope, media caravan tour and opinion editorial for geo-technology on a message scope, geoscience award and active use of "the year of earth science" on a tool and channel scopes, and regular measurement of public response and regular appraisal of PR goal/results on a receiver scope.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.3
• /
• pp.260-270
• /
• 2010

Reducing the losses of the tip clearance flow is one of the keys in an unshrouded centrifugal compressor design and development because tip clearances are large in relation to the span of the blades and also centrifugal compressors produce a sufficiently large pressure rise in single stage. This problem is more acute for a low flow high-pressure ratio impeller design. The large tip clearance would cause flow separations, and as a result it would drop both the efficiency and surge margin. Thus a design of a high efficiency and wide operation range low flow coefficient centrifugal compressor is a great challenge. This paper describes a recent development of high efficiency and wide surge margin low flow coefficient centrifugal compressor. A viscous turbomachinery optimal design method developed by the authors for axial flow machine was further extended and used in the centrifugal compressor design. The compressor has three main parts: impeller, a low solidity diffuser and volute. The tip clearance is under a special consideration in this design to allow impeller insensitiveness to the clearance. A patented three-dimensional low solidity diffuser design method is used and applied to this design. The compressor test results demonstrated to be successful to extend the low solidity diffusers to high-pressure ratio compressor. The compressor stage performance showed the total to static efficiency of the compressor being about 85% and stability range over 35%. The test results are in good agreement with the design.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.3
• /
• pp.137-148
• /
• 2020

The purpose of this study is to investigate factors influencing risk assessment of material misstatement in Vietnamese enterprises listed on stock market. Expert interview method was conducted to discover the scales for three variables including information system, trademark, and risk assessment of material misstatement. Survey method was used to examine the impacts of eight factors on risk assessment of material misstatement. Data is collected from 317 auditors who have excellent experience in auditing financial statements of companies listed on stock market. Then, data is processed by descriptive statistics, reliability analysis, factor extracted analysis, correlative regression analysis, and analysis variance of residual change. The research findings showed that business characteristic, stakeholder pressure, and economic environment have positive relationships with risk assessment of material misstatement. Three variables including operation control and monitor, control environment, and information system negatively affect to risk assessment. Specially, business characteristic and information system, which are elements in internal control, have strongest impact on risk assessment. One the other hand, assessment of internal control plays an important role not only in the audit plan stage but also throughout the stages of the audit implementation and ending. Therefore, appropriate solutions are proposed to carry out all audit stages.

• Journal of the Korean Professional Engineers Association
• /
• v.19 no.4
• /
• pp.11-21
• /
• 1986

Mine drainage from coal mines is mostly acidic, polluted and/or contaminated, even if its quantity has increased substantially during recent days. This causes two kinds of problems arising at mining districts; one is the environmental disruption and the other is insufficient water supply for living, employee's bathing and industrial purposes. In order to mitigate the aforementioned problems, a specific equipment of Korea type for mine drainage purification has been developed and its prototype manufactured, followed by its applicability tests implemented at mine site. The results of the tests indicates that the new equipment developed is much lower than and economical compared to, other existing neutralization facilities at home and abroad in capital investment at installation stage, the consumption of neutralizing chemicals at operation stage and the requirements of installation site. Whangji area where the prototype water treatment equipment is installed has been sustaining a short supply of usable water, especially in dry seasons and supplementing about 40㎥ of water brought from a location farther than 4km in distance to meet water requirements. The prototype water treatment equipment is however considered capable of providing compressor cooling water in sufficient amount from winter season In the future.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.54-60
• /
• 1988

Machinabilities means inherent properties of pinus densiflora at Chunyang district to be CNC machined easily or not, and processing abilities of the tool and machine together. This explanation signifies that machinabilities have two phases of signification, depended on considering and stress either materials or tools preferentially. This paper discuss machinabilities, the following items are usually employed as the indices of stress distribution at the cutting tool rake face. The stress distributions on the chip - tool contact surface at the early stage of the chip forming and under the stage of fringe pattern in wood cutting were analyzed the photoelastic method. The tool used in the present experiment was the special cutting tool H.S.S. one made in laboratory. And isochromatic fringe pattern and isolinic line of work piece by chip-behavior during the cutting operation were photographed with the feed camera continuously. The effects on the stress, distribution on the rake face of the epoxy tool and the strain distribution in the work piece of wood plate by chip behavior are cleared in pre cent experiment.