• Journal of Acupuncture Research
• /
• 제33권4호
• /
• pp.121-136
• /
• 2016

Objectives : Despite various treatment for Shoulder-hand syndrome being presented, only a few studies that examine the direct efficacy of acupuncture exist. The aim of this study is to establish a base for further research by reviewing studies on acupuncture treatment for Shoulder-hand syndrome. Methods : Clinical studies involving the effects of acupuncture for Shoulder-hand syndrome, published on July 19th 2016, were obtained from Pubmed, RISS, OASIS, the Journal of Korean Acupuncture and Moxibustion, the Journal of Korean institute of pharmacopuncture, the Korean Journal of Acupuncture, NDSL, Korean Traditional Knowledge Portal, DBpia, and KISS. Selected studies were evaluated by the Jadad scale and FEAS. Results : Among a total of two hundred and fifteen articles, thirteen articles (RCT 9, SR 1, Meta analysis 1, CCT 1 article, Case series 1) that meet the criteria were selected. Among 13 articles, one article was published in Korea. And apart from this one article, twelve studies were published in China. All studies reported that the experimental group treated by acupuncture had significantly better effects compared to the control group. However, the overall quality assessment of the studies is low. Conclusion : Despite several limitations, various studies to prove limited yet effective acupuncture treatment on Shoulder-hand syndrome provides much significance. Subsequent studies conducted by the complementary systematic review of the studies and well-designed clinical trials using the methodological quality will be needed to more firmly validate the therapeutic effect of acupuncture on Shoulder-hand syndrome.

• 정보처리학회논문지B
• /
• 제15B권1호
• /
• pp.25-36
• /
• 2008

본 논문은 조명의 변화가 심한 영상에서 손 형태를 안정적으로 인지하는 기법에 관한 것이다. 제안한 방법은 HSI 색상공간에서 색상(Hue) 및 색상 기울기(Hue-Gradient)를 기반으로 정의된 배경모델을 구축하고, 실시간으로 입력되는 영상과의 배경차분(background subtraction)기법을 이용하여 배경과 손을 구분한다. 추출된 손의 영역으로부터 18가지의 특징요소를 추출하고 이를 기반으로 다중클래스 SVM(Support Vector Machine) 학습 기법을 사용하여 손의 형태를 인지한다. 제안 기법은 색상 기울기를 배경 차분에 적용함으로써, 조명 환경이 배경 모델의 조명과 다르게 급격한 변화가 이루어졌을 때도 안정적으로 손의 윤곽정보를 추출할 수 있도록 하였다. 또한, 실시간 처리를 저해하는 복잡한 손의 특성정보 대신, OBB의 크기에 대하여 정규화된 두 개의 고유값과 객체 기반 바운딩 박스(OBB)를 구성하는 16개 세부 영역에서의 손 윤곽픽셀의 개수를 손의 특성정보로 사용하였다. 본 논문에서는 급격한 조명 변화 상황에서 기존 RGB 색상요소를 기반으로 하는 배경차분법과 색상을 기반으로 하는 배경차분법, 본 논문에서 제안하는 색상 기울기 기반 배경 차분법의 결과를 비교함으로써 제안 기법의 안정성을 입증하였다. 6명의 실험대상자의 1부터 9까지의 수지화 2700개의 영상으로부터 손 특성 정보를 추출하고 이에 대하여 훈련을 통한 학습 모델을 생성하였다. 학습모델을 기반으로 실험자 6인의 손 형태 1620개의 데이터에 대하여 인지 실험을 실시하여 92.6%에 이르는 손 형태 인식 성공률을 얻었다.

• The Journal of Korean Physical Therapy
• /
• 제20권3호
• /
• pp.45-51
• /
• 2008

Purpose: We evaluated the physical stress and pain to the musculoskeletal system of a dental practitioner when engaging in a dental scaling training exercise to prevent the development of musculoskeletal injuries. Methods: The 18 female (average age: 21$\pm$1 years) subjects were voluntarily picked from a group of juniors who have completed a one-and-a-half year training course that includes training exercises on the dentiform and on live subjects (other trainees). The test is done by measuring pain, activity, grip strength, and finger dexterity for each subject's hand and wrist. Before the test all subjects were confirmed to be right-handed and were informed of the study and its objective. Measuring was done before and after each subject performed dental scaling for one hour using the scaler and the curet. Results: Pain levels increased for both hand and shoulders, but hand pain was often greater than shoulder pain. Grip strength significantly declined in the right hand but not the left. For joint mobility, the flexion and the extension for the shoulder joint did not change; but the range of motion for both wrist joints significantly increased. For the dexterity test, both hands showed increased dexterity after the exercise. Conclusion: Dental scaling can affect the shoulders and wrists/hands. Therefore, a musculoskeletal injury prevention program for dental practitioners, which may include encouraging them to assume correct body posture when at work, must be sought. This study evaluated only the shoulders, wrists, and hands; but future studies should include areas such as the cervical area, the back, and the lower limbs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1106-1110
• /
• 2004

A human sign language is generally composed of both static and dynamic gestures. Each gesture is represented by a hand shape, its position, and hand movement (for a dynamic gesture). One of the problems found in automated sign language translation is on segmenting a hand movement that is part of a transitional movement from one hand gesture to another. This transitional gesture conveys no meaning, but serves as a connecting period between two consecutive gestures. Based on the observation that many dynamic gestures as appeared in Thai sign language dictionary are of quasi-periodic nature, a method was developed to differentiate between a (meaningful) dynamic gesture and a transitional movement. However, there are some meaningful dynamic gestures that are of non-periodic nature. Those gestures cannot be distinguished from a transitional movement by using the signal quasi-periodicity. This paper proposes a hybrid method using a combination of the periodicity-based gesture segmentation method with a HMM-based gesture classifier. The HMM classifier is used here to detect dynamic signs of non-periodic nature. Combined with the periodic-based gesture segmentation method, this hybrid scheme can be used to identify segments of a transitional movement. In addition, due to the use of quasi-periodic nature of many dynamic sign gestures, dimensionality of the HMM part of the proposed method is significantly reduced, resulting in computational saving as compared with a standard HMM-based method. Through experiment with real measurement, the proposed method's recognition performance is reported.

• Journal of Korean Neurosurgical Society
• /
• 제61권1호
• /
• pp.75-80
• /
• 2018

Objective : Among the various sacropelvic fixation methods, S2 alar-iliac (S2AI) screw fixation has several advantages compared to conventional iliac wing screw. However, the placement of S2AI screw still remains a challenge. The purpose of this study was to describe a novel technique of free hand S2AI screw insertion using a K-wire and cannulated screw, and to evaluate the accuracy of the technique. Methods : S2AI screw was inserted by free hand technique in sixteen consecutive patients without any fluoroscopic guidance. The gearshift was advanced to make a pilot hole passing through the sacroiliac joint and directing the anterior inferior iliac spine. A K-wire was placed through the pilot hole. After introducing a cannulated tapper along with the K-wire, a cannulated S2AI screw was installed over the K-wire. Results : Thirty-three S2AI screws were placed in sixteen consecutive patients. Thirty-two screws were cannulated screws, and one screw was a conventional non-cannulated screw. Thirty out of 32 (93.8%) cannulated screws were accurately positioned, whereas two cannulated screws and one non-cannulated screw violated lateral cortex of the ilium. Conclusion : The technique using K-wire and cannulated screw can provide accurate placement of free hand S2AI screw.

• Archives of Plastic Surgery
• /
• 제36권1호
• /
• pp.46-50
• /
• 2009

Purpose: Finger injury by green onion cutting machine is one of the common hand injuries in the kitchen. It has a unique feature: there are multiple parellel laceration 3 - 5 mm wide. There are two directions of injuries(vertical, oblique). It may involve bone, tendon, nerve, and vessel injuries. We discuss its management and the long - term progress. Methods: We have treated six patients from 2003 to 2007. We carried out low tension approximation with thin suture materials to avoid ischemia and performed the additional operation as nail bed repair, tenorrhaphy, open reduction, vessel anastomosis, and composite graft. We reviewed the record of initial injury and collected the follow - up record. Results: They were all middle aged - women who had worked in the kitchen. Right hand was dominent over left hand. The ratio of the directions was 3 : 3 (vertical : oblique). They were all competely healed although there were three atrophy, four hyperesthesia, and one nail deformity. Conclusion: Finger injury by green onion cutting machine is a unique pattern of laceration with various accompanied injuries. It may look like a severe form of injury, but in most cases have relatively favorable progress. We have to perform careful examination of accompanied injuries and carry out the proper management. First and foremost, the user especially in the middle aged women should be warned to be careful in handling this risky machine.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.371-378
• /
• 2014

Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions ($2{\times}3{\times}3$). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position.

• 대한지리학회지
• /
• 제44권3호
• /
• pp.301-322
• /
• 2009

본 논문은 국지적 이동성의 도시 기계 공간인 지하철 공간의 기호적 재현을 공간, 시간, 장소의 의미에서 탐구한다. 제2절은 기존 연구에서 제시된 이동성의 도시 공간의 전반적 특징을 '기계 공간', '(비-)장소', '인지 지도'의 개념을 중심으로 검토한다. 제3절은 대구 지하철 공간에 대한 '공간적' 및 '시간적' 재현의 기호들을 해석하고, 그 기호적 재현의 의미를 제시한다. 이를 통해 지하철 공간에 상호 조화적으로 혹은 모순적으로 공존하는 기호 경관들이 그 공간을 다중적, 복합적인 기술-사회 공간으로 생산한다는 것을 밝힌다. 지하철 공간의 공간적-시간적 재현은 한편으로는 '(비-)장소', 다른 한편으로는 '장소'의 공간을 형성하며 또한 한편으로는 '기억', 다른 한편으로는 '망각'의 공간화를 수반한다. 지하철 공간은 사람들이 이동하는 '이동성' 의 공간만이 아니라 기계 및 도시 공간을 바라는 방식에 영향을 주는 '정체성'의 공간으로 생각되어야 한다.

• 제어로봇시스템학회논문지
• /
• 제11권12호
• /
• pp.1045-1050
• /
• 2005

This paper describes a design experience of a low-cost 6 DOF spatial tracker system where relative low accuracy and relatively long ranges, wireless communication will be achieved by means of low cost accelerometers and gyros with contemporary microprocessor. However, there are two key problems; one is the bias drift problem and the other is that single or double integration of acceleration signal suffers not only from noise but also from nonlinear effects caused by gravity. To be specific, beginning and stopping of hand motions needs to be accurately detected to initiate and terminate integration process to get position and pose of the hand from accelerometer and gyro signals, since errors due to noise and/or hand-shaking motions accumulated by integration processes. Several experimental results are shown to validate our proposed algorithms.

• 한국실내디자인학회논문집
• /
• 제13권3호
• /
• pp.11-16
• /
• 2004

Adolf Loos studied at the Dresden Institute of Technology. He lived in America from 1893 to 1896. On his return to Vienna, hi worked for a year with the architect, Carl Mayreder. From 1897, he wrote extensively on design and architectural matters. In 1908, his famous article "Ornament and Crime"(Ornament und Verbrechen) was published, in which he linked the use of excessive decoration to a debasement of society. For Adolf Loos, it was a question not of renunciation of every ornament, but of the liberation from superfluous ornament. Where ornament was pastes on only, without connection with the subject or the building, and where ornament was not honest with the hand put on, the ornament is supposed to be removed. Onto the place of the ornament the joy of the material and the shaping should step. That the opinion of Adolf Loss is not correctly understood Is due on the one hand to the concentration on the 'ornament and crime' too very much. On the other hand his extreme Position is supposed to be understood more as thinking-impulse, more as provocation.ovocation.