A relay is the one of small electrical components for automobiles and used for industry widely. We have developed the automation system for relay assembly and test to make it improve the productivity and decrease the man power. In order to determine the objective process of automation, we investigated 6 small and medium sized-enterprises and 1 greate sized-enterprise producing relays. And, we selected 2 model enterprises of them. One of the two is the system to develop. The scope of our study is the analyse of the conventional workcell, the determination of the system specification, the design of the system layout, the determination of the system cycle time, the design of the system mechanism, and the development of the controller for the system. We think that the developed system may be solve the technical and the economical problems interrupted efficiential automation of domastic small and medium sized-enterprises, and improve the international competitive power.
Transactions of the Korean Society for Noise and Vibration Engineering
/
v.17
no.12
/
pp.1217-1222
/
2007
With recent advance in automotive noise control engineering reducing major sound sources in the vehicle, customers perceive Buzz, Squeak and Rattle (BSR) as one of important indicators of vehicle quality and durability. As the long-term goal, we expect to establish the integrated design cycle for the reduction of the BSR noise in the early stage of vehicle development. which consist of design, prediction and evaluation procedures. This is possible only with great bulk of experimental data for BSR noise. In this paper, BSR noise is experimentally identified for vehicle doors, which have been traditionally considered as one of main sources of BSR noise. Based on this result, we proposed systematic method for the prevention of BSR noise in the vehicle doors.
Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
/
2004.05a
/
pp.526-529
/
2004
A new SEPIC-Flyback convater is proposed. The proposed converter is the superposition of SEPIC and Flyback converter. Not only SEPIC output but also Flyback output could be fully regulated by constant frequency PWM control. Merged SEPIC and Flyback topology could share the transformer and power MOSFET. When the switch turns of one topology operates via capacitive energy transfer. Another topology acts as powering mode while the switch is off. So, it could increase power falsify per one cycle. The operating principle of the proposed converter is described below. Prototype featuring 24V input 48V output, 100kHz switching frequency, and 100W output is simulated under the proposed topology.
International Journal of Industrial Entomology and Biomaterials
/
v.4
no.2
/
pp.83-91
/
2002
The protection of silkworm and its host plants from various kinds of pests parasite and predator is a chronic problem in sericulture. Silkworms and its primary food plants are heavily damaged by large number of pest. The major pests of primary tasar food plants (Terminalia arjuna and Terminalia tomentosa) are the gall insect (Trioza fletcheri minor). Various species of aphids (Eutrichosiphum sp.) have been recorded to damage oak tasar food plants whereas muga silkworm host plants (Machilus bombycina and Litsaea polyantha) are generally attacked by stem bores (Zeuzera multistrigata). Castor (Ricinus communis) is one of the primary host plant of eri silkworm and extensive damage is caused by the castor white fly (Trialeurodes ricini). Insects pests are major enemies of silkworms. Parasites (Blepharipa zebina, Exorista bombycis, Apateles glomeratus), predators (Canthecona furcellata, Sycanus collaris, Hierodulla bipapilla), wasps (Vespa orientalix) and ants (Oecophylla smargdina) continues to cause damage to silk industry. It is estimated that the losses due to parasites and predators are to an extent of 15-20 percent and varies from crop to crop. The complexities in the behaviour and life cycle of pest population existing in semi ecosystem warrant a special attention for their effective management specially in changing scenario for our modern sericulture. Though use of synthetic insecticides has provided us with effective control of almost all major pests and predators, yet their undesirable side effects limit their continued use. Biological control is one of the most important method which can be used to control the pests, parasites and predators population in sericulture. Various potential parasitoids, which can be utilized as an agent of biological control in sericulture have been screened. The natural enemies of the uzi fly (E. bombycis and B. zebina ) are already present in the nature. Nesolynx thymus, Trichria sp., Splangia endius, Dirhinus sp., Trichopria sp., Trichomalopsis apanteloctena and Pediobius sp. are the major parasitoids effective against uzi fly pupa. The scelionid Psix striaticeps and Trissolcus sp. are the Potential egg Parasitoids against stink bug (Canthecona furcellata). Various other native natural potential parasitoids have been screened and suitable strategies have been developed to check the population of pest insect in sericulture.
Journal of Institute of Control, Robotics and Systems
/
v.14
no.4
/
pp.353-360
/
2008
The LGP with nanometer structures resulted in enhancement of optical efficiency. Its fundamental mechanism is to recycle the polarized light via one round-trip through QWP(Quarter-Wave Plate) but the maximum efficiency to reach with this method is limited up to 2. To get the larger efficiency than this limited one a LGP with nanometer-patterned grating is suggested. For its optimum design the computer simulation is performed and suggests a grating that the spatial frequency between adjacent patterns is 500nm, its height 250nm, duty cycle 50%, and its cross section is rectangular. On the basis of simulation results the LGP with nanometer-patterned grating is fabricated and its optical properties such as angular intensity distribution and CIE color coordinates are characterized. The angles of transmitted light are nearly the same as the results expected from the generalized Snell's law. Thus the Mathematica code, developed in this experiment, will be applied to designing the optimized LGP. The LGP with nanometer-patterened grating shows the enhancement of transmitted intensity distribution up to 4.9 times.
Journal of Institute of Control, Robotics and Systems
/
v.14
no.6
/
pp.530-534
/
2008
The LGP with nanometer structures resulted in enhancement of optical efficiency. Its fundamental mechanism is to recycle the polarized light via one round-trip through QWP(Quarter-wave Plate) but the maximum efficiency to reach with this method is limited up to 2. To get the larger efficiency than this a LGP with 1D PC(one-dimensional photonic crystal) nanometer-patterned on its top and bottom surfaces is suggested. For its optimum design the computer simulation is performed and suggests a grating that the spatial frequency between adjacent patterns is 500nm, its height 250nm, duty cycle 50%, and its cross section is rectangular. The angles of transmitted light are nearly the same as the results expected from the generalized Snell's law. Thus the Mathematica code, developed in this experiment, will be applied to designing the optimized LGP. The LGP with nanometer-patterened 1D PC LGP on its both surfaces shows the enhancement of transmitted intensity distribution up to 5.7 times.
Effects of sodium fluoride exposure on the amelogenesis during fetal formation were investigated using 11 days rat incisor of control group and two experimental groups. According to results of morphological analysis using an electron microscope, enamel organ in the rat incisor consisted of presecretory, secretory, and maturation zone, especially maturation zone had ruffle-ended ameloblasts (rAB) that additionally supply inorganic ions and smooth-ended ameloblasts (sAB) that remove water and organic compounds. Such a histological composition was same in fetal and adult rats. According to experimental results using calcein (green fluorescence) in order to reveal the modulation cycle of ameloblast, modulation cycle of experimental group decreased on an average one time than control group, as increase of density of sodium fluoride indicated that thickness of smooth-ended ameloblast decreased. Also ratio of thickness on sagittal total length of sAB increased than rAB in experimental groups than control group. In total length of teeth, an injected 100 ppm sodium fluoride group was similar control group but as injected 200 ppm group became short. In experimental group, thickness of sAB and rAB became narrow to the tip of cutting edge. According to concentration of sodium fluoride grows, the modulation cycle and total length of teeth were decreased, finally it prevented teeth growth.
Jo, Cheorun;Kim, Dong-Ho;Lee, Won-Dong;Lee, Jae-Jin;Byun, Myung-Woo
Journal of the Korean Society of Food Science and Nutrition
/
v.32
no.5
/
pp.673-678
/
2003
Changran Jeotgal (aged and seasoned intestine of Alaska pollack) was prepared as the same method as commercial one and irradiated at 0, 2.5, 5.0 and 10 k㏉ by gamma ray for industrial application. Changran Jeotgal using 10 k㏉-irradiated red pepper powder was also prepared to compare with control (0 k㏉). Commercial red pepper powder was already contaminated at 3.8$\times$10$^{6}$ CFU/$m\ell$ level by total plate count and 10k㏉ of irradiation reduced the number about 4 log cycles. Gamma irradiated Changran Jeotgal at 2.5,5.0, and 10k㏉ showed 3 6, and 7 log cycles of reduction compared to the non-irradiated control in the total plate count after 12 weeks of storage at 1$0^{\circ}C$. Using irradiated (10k㏉) red pepper powder reduced the microbial contamination significantly by 2 log cycles compared to the control. Sensory evaluation showed that the sample irradiated at 2.5 k㏉ was the most acceptable, followed by the sample using irradiated red pepper powder and non-irradiated control. Thus, 2.5 k㏉ of irradiation of Changran Jeotgal was effective to improve safety during distribution and storage without change of sensory quality. Furthermore, using the irradiated red pepper powder is also recommended for safety enhancement of the products.
In this experiment, observations were made on the effects of ginseng saponin, one of the major components of Korean ginseng (Panax ginseng, C. A. Meyer) root, on the membranes of microorganism (E. coli K-12), the concentration of intracelluar and extracellular cycle AMP therein, and uptake of U-14C-glucose. When the E. coli were grown on media containing 0.1% ginseng saponin, the growth was faster than for that of the control by about 30 minutes. The lysis of E. coli grown on the ginseng saponin medium increased to about double that of the control in the stationary phase. And the amount of protein and lipopolysaccharides in the outer cell meberances increased 25% and 80% respectively in comparison with the control. By electron microscope observation, it was shown that the periplasmic region of the E. coli grown on the ginseng saponin medium was widened it was observed that the cellular cyclic AMP content of the E. coli increased significantly to the hightest levels between the late exponential phase and early stationary phase. The total cyclic AMP content of E. coli grown on the ginseng saponin medium decreased about 50% when compared to that of the control.
For the vast majority of geostationary satellites currently in orbit, station keeping activities including orbit determination and maneuver planning and execution are ground-directed and dependent on the availability of ground-based satellite control personnel and facilities. However, a requirement linked to satellite autonomy and survivability in cases of interrupted ground support is often one of the stipulated provisions on the satellite platform design. It is especially important for a geostationary military-purposed satellite to remain within its designated orbital window, in order to provide reliable uninterrupted telecommunications services, in the absence of ground-based resources due to warfare or other disasters. In this paper we investigate factors affecting the robustness of a geostationary satellite's orbit in terms of the maximum duration the satellite's station keeping window can be maintained without ground intervention. By comparing simulations of orbit evolution, given different initial conditions and operations strategies, a variation of parameters study has been performed and we have analyzed which factors the duration is most sensitive to. This also provides valuable insights into which factors may be worth controlling by a military or civilian geostationary satellite operator. Our simulations show that the most beneficial factor for maximizing the time a satellite will remain in the station keeping window is the operational practice of pre-emptively loading East-West station keeping maneuvers for automatic execution on board the satellite should ground control capability be lost. The second most beneficial factor is using short station keeping maneuver cycle durations.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.