• 대한의용생체공학회:의공학회지
• /
• 제29권2호
• /
• pp.99-106
• /
• 2008

To improve $B_1$ homogeneity in high field MRI, the RF power is applied to the transmit array coil elements sequentially in the time-multiplexed way. Since only a single coil element is activated in a time-multiplexing slot, the global standing wave formation in the human body is greatly suppressed. The time-multiplexing slot width is on the order of micro seconds, hence, high-order-harmonic slices can be placed far from the transmit coil and simultaneous multiple slice selection can be avoided. The $B_1$ homogeneities of a birdcage coil and an eight-channel transmit array coil have been compared through finite difference time domain simulations. The simulation results indicate that the proposed technique can reduce the peak-to-peak $B_1$ inhomogeneity down to one fourth of the transmission with a birdcage coil on the central plane of the human head model at 3 T. The mimicking experiments at 3 T, eight separate experiments with a single coil element activated and image reconstruction by combining the eight images, also show promising results. It is expected that the proposed technique has some advantages over other $B_1$ improving methods in real practice since simple RF switching circuitries are only necessary and electromagnetic coupling between the coil elements is out of concern in its realization.

• 한국통신학회논문지
• /
• 제29권11B
• /
• pp.956-966
• /
• 2004

향후 NGN(Next Generation Network)은 패킷 기반의 QoS가 제공되는 네트웍으로 발전하고 있다. 본 논문에서는 MPLS 네트웍에서의 보다 효율적인 경로 선택에 관한 기법으로 Service interruption time을 줄이는 복구방법을 제안한다. 장애복구의 주요 성능 중의 하나인 복구자원사용의 효율성을 높이기 위해서 각 노드들 간의 state information을 fault detector 와 bandwidth broker가 서로 공유하여 장애 발생 시 복구를 위한 message transmission time을 줄였다. 또한 트래픽양의 변화에 따라 망 전체의 필요한 대역폭을 효과적으로 관리하고 변화시킴으로써 대역폭 사용의 효율성을 개선하였다. 그리고 우선순위 서비스를 제공할 수 있는 MPLS 망에서 우선순위에 따른 트래픽에 대해서도 전체 망에 도메인을 나눔으로써 우선순위가 높은 트래픽에 대한 종단간 복구방법에 대해 효율적인 자원 할당을 하며 낮은 우선순위의 트래픽에 대해서 장애가 발생한 도메인 내에서만 경로 복구를 하여 재설정을 위한 시간을 줄일 수 있고, 불필요한 메시지의 전달을 줄일 수 있다

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.1976-1981
• /
• 2013

본 논문에서는 직접 대역 확산 (direct-sequence spreading spectrum) 시스템을 위한 주파수 영역 간섭 (tone interference) 신호 제어 알고리듬을 제안한다. 기존에 제안된 주파수 영역 간섭 제거 기법들에서는 프로토콜들의 모음을 의미하는 전송제어 프로토콜(TCP: Transmission Control Protocol) 트랜스포트 계층에서 가장 광범위하게 사용되어 왔다. 양방향 트래픽을 네트워크 경로를 통해 동일한 종단 노드 쌍 사이의 반대 방향에서 데이터를 전송하는 두 개 또는 그 이상의 TCP 연결로부터 생긴 트래픽 패턴을 사용하고 네트워크의 교환기와 라우터들을 공유하므로 승인의 결과를 초래한다. per-flow 입출력 반응을 사용하여 LTS 상관 구조를 온라인으로 평가할 때 이는 중요한 요인이 된다. TCP-MT는 연결 지속 기간이 길 때 가장 큰 성능 이득을 제공한다.

• 한국의류학회지
• /
• 제17권4호
• /
• pp.577-586
• /
• 1993

Pesticide protective clothing has not been frequently worn due to its lack of thermal comfort. It is important to develop fabrics which can allow the wearer to work in comfort. One of the possible way to achieve the goal is to produce fabrics with a water- and oil-repellent finish which would resist pesticide penetration but maintain some breathability. The purpose of this study were to evaluate the pesticide barrier properties of untreated and water- and oil-repellent finished nonwoven fabrics. Three types of nonwoven fabrics(Tyvek, Sontara and Kimlon) were used as test specimens. By pad-dry-cure method, each of the specimen was treated with fluorocarbon. The pesticide barrier properties (amount of pesticide penetration and residue) were measured by the gas chromatography. The performance properties of untreated and treated specimens were evaluated with respects to water pepellency(KS K 0590), oil repellency(AATCC 118), water resistance(KS K 0591, AATCC 42), water vapor transmission (KS A 1013) and air permeability(KS K 0570). The results of this study were as follows : 1) The untreated Sontara showed much more amount of pesticide penetration than untreated Tyvek and Kimlon, while the treated Sontara showed little amount of pesticide penetration. 2) After laundering, the amount of pesticide residue in the untreated and treated Sontara was less than that in Tyvek and in Kimlon. 3) Water- and oil-repellent finish improved water repellency, oil repellency, and water resistance of specimens. 4) The untreated Sontara and Kimlon showed higher water vapor transmission and air permeability than untreated Tyvek. Water vapor transmission and air permeability of treated specimen decreased compared to those of untreated.

• 인터넷정보학회논문지
• /
• 제12권2호
• /
• pp.75-83
• /
• 2011

무선 인지(CR : Cognitive Radio) 시스템은 우선 사용자에게 할당되어 있지만 실제로 사용되지 않는 주파수 대역을 감지하고 사용함으로써 스펙트럼 효율을 향상시킬 수 있는 기술이다. 우선 사용자가 채널을 점유하게 되면 무선 인지 시스템은 우선사용자 시스템에 대한 간섭을 피하기 위해 다른 채널로 이동해야 하며, 이 때 새로운 채널에서 무선 인지 시스템 송 수신기가 핸드셰이크를 하기 까지 통신 단절 시간이 생기게 된다. 따라서 무선 인지 시스템에 대한 서비스 품질의 보장을 위해서는 보다 빠른 핸드셰이크 기법이 요구된다. 본 논문에서는 Broadcasting 구간뿐만 아니라 데이터 전송 구간에서도 임베디드 제어 신호를 전송함으로써 무선 인지 시스템의 통신단절시간을 감소시키고, 데이터 전송률을 높일 수 있는 기법을 제안한다. 마지막으로 컴퓨터 모의실험 결과를 통해 제안하는 임베디드 제어 신호 전송 방식이 기존의 방식보다 우수한 성능을 보임을 확인하였다.

• 한국통신학회논문지
• /
• 제27권7B호
• /
• pp.706-718
• /
• 2002

In bluetooth system, there are two kinds of interference. One is the frequency static interference, for example 802.11 direct sequence, the interferer uses fixed frequency band. Another is frequency dynamic interference, for example other piconets or 802.11 frequency hopping, the interferer uses dynamic frequency channel and cant be estimated. In this paper we introduce a novel solution of hybrid method of Listen-Before-Talk (LBT) and Adaptive Frequency Hopping (AFH) to address the coexistence of bluetooth and Direct Sequence of wireless local area network (WLAN). Before any bluetooth packet transmission, in the turn around time of the current slot, both the sender and receiver sense the channel whether there is any transmission going on or not. If the channel is busy, packet transmission is withdrawn until another chance. This is the LBT in Bluetooth. Because of asymmetry sense ability of WLAN and bluetooth, AFH is introduced to combat the left front-edge packet collisions. In monitor period of AFH, LBT is performed to label the channels with static interference. Then, all the labeled noisy channels are not used in the followed bluetooth frequency hopping. In this way, both the frequency dynamic and frequency static interference are effectively mitigated. We evaluate the solution through packet collision analysis and a detail realistic simulation with IP traffic. It turns out that the hybrid method can combat both the frequency dynamic and frequency static interference. The packet collision analysis shows it almost doubles the maximal system aggregate throughput. The realistic simulation shows it has the least packet loss.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 2008

The flex plate, an automotive part which mounts to the automotive engine to transfer torque to transmission, should have considerable hardness and shape accuracy. As a way to produce the flex plate, the hot press forming technology which takes advantages of high formability at elevated temperature, enhanced strength and shape stability was introduced. Therefore, as one of major process parameters the heat treatment condition should be determined to obtain appropriate hardness in the range of manufacturer's specifications. In this study, two heat treatments, austempering and quenching and tempering (QT), were compared as feasible conditions fur the hot press forming of high-carbon tool steel and the hardness and toughness after heat treatments were evaluated. The study showed that both heat treatments resulted in improved hardness but only quenching and tempering showed practicable range of toughness.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.519-523
• /
• 2004

In this paper we challenge the user Authentication using KerberosV5 authentication protocol in WPKI environment. This paper is the security structure that defined in a WAP forum and security and watches all kinds of password related technology related to the existing authentication system. It looks up weakness point on security with a problem on the design that uses wireless public key based structure and transmission hierarchical security back of a WAP forum, and a server client holds for user authentication of an application layer all and all, and it provides one counterproposal. Therefore, We offer authentication way solution that connected X.509 V3 with using WIM for complement an authentication protocol KerberosV5 and its disadvantages.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.281-284
• /
• 2002

Error resilience for image coding is an important component of multimedia communication system. Error resilience schemes address loss recovery from the compression perspective. Multiple description coding (MDC) is one of the error resilience techniques promising for robust video transmission. It is the way to achieve tradeoff description such as scalar quantization, correlating transform and the quantized frame expansion. In this paper, we consider Multiple Description Scalar Quantization (MDSQ) to wavelet domain. Conventional MDSQ schemes considered description with equal weights in each sub-bands. But, we can see that the each sub-bands is unequal contribution to whole image quality. Therefore, we experiment the multiple design MDSQ table to make probability of zero index high, which gives high efficiency in arithmetic symbol coder. We also compare our proposed method with the conventional methods and show improved performance in terms of redundancy-rate-distortion.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권1호
• /
• pp.27-33
• /
• 2012

The Ethernet Passive Optical Network (EPON) has been considered to be one of the most promising solutions for the implementation of the Fiber To The Home (FTTH) technology designed to ameliorate the "last mile" bandwidth bottleneck. In the EPON network, an efficient and fair bandwidth allocation is a very important issue, since multiple optical network units (ONUs) share a common upstream channel for packet transmission. To increase bandwidth utilization, an EPON system must provide a way to adaptively allocate the upstream bandwidth among multiple ONUs in accordance to their bandwidth demands and requirements. We present a new hybrid method that satisfies these requirements. The advantage of our method comes from the consideration of application-specific bandwidth allocation and the minimization of the idle bandwidth. Our simulation results show that our proposed method outperforms existing dynamic bandwidth allocation methods in terms of bandwidth utilization.