• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2027-2034
• /
• 2008

There are concerns on possible health effects from exposure to electromagnetic fields. One reflection of this concerns is the considerable controversy, delay, and cost increases involved in the construction of power lines and facilities. To cope with such challenges, in this paper we investigated magnetic fields reduction techniques such as general compaction, in' span compaction, cruciform, vertical, 3 way splits phase, and 4way splits phase. As results, we found general compaction and 4 way splits phase could reduce magnetic fields up to 90%, while cruciform, vertical, and 3 way splits phase gave lower reduction rates of 30% because these configurations were similar to a current type of low reactance arrangement. We also knew 1 spacer in span compaction was appropriate in Korea in view of effectiveness and economy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2339-2344
• /
• 2014

of a microstrip transmission line, this transmission line can operate as the microstrip line or the coplanar line according to open or short connection between the ungrounded copper plane and grounded plane on the base plane. Two different type operation of the transmission line means that one transmission line can have two different characteristic impedances. This paper proposes and fabricates the circuit to be operated 2-ports power transmission line or 2-way power divider with the stable input matching characteristic by using this dual-impedance transmission line. The proposed circuit operates 2-ports power transmission line in case of the coplanar line or 2-way power divider line in case of the microstrip line. The fabricated circuit shows $S_{21}$ > -0.2 dB and $S_{11}$ < -15 dB above 700 MHz when the circuit operates 2-ports power transmission line. And, it is $S_{21}$ > -3.8 dB, $S_{11}$ < -10 dB and $S_{21}/S_{31}$ < ${\pm}0.3dB$ above 700 MHz when the circuit operates 2-way power divider.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.141-147
• /
• 2018

We propose a wideband 4-way quadrature divider for global navigation satellite system (GNSS). The proposed divider consists of one balun and two 2-way quadrature dividers. In the balun, the input power is divided by a wilkinson divider and the out of phase characteristic is achieved by ${\pm}90^{\circ}$ metamaterial transmission line phase shifters applied two output ports. The structures of two quadrature dividers is similar to that of the balun, but the phase shifters of two output ports are exchanged by ${\pm}90^{\circ}$ metamaterial transmission line. Metamaterial transmission lines are designed by using five LC loaded transmission line (LCL-TL) unit cells. The fabricated 4 way quadrature divider has the phase characteristic of $90^{\circ}{\pm}10^{\circ}$ in 1.165 - 1.61 GHz.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.165-170
• /
• 2003

In this thesis, we suggest the contents transmission system applied by Encryption Module. It prevents illegal distribution and reproduction of contents and supplements the limitation of the exiting transmission systems during the transmission by providing the contents encoded by RSA encryption algorithm and XOR computation method through user-oriented browser. And at same time, it protects the copyright with typing the contents and user-oriented browser in one-to-one manner by way of using the browser to renew a encoding key as soon replay is completed.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.22-24
• /
• 2000

As a competition is introduced in the electricity supply industry, a congestion problem arises in the transmission network. The congestion causes the transmission cost to increase. One way to decrease the congestion cost is to control the transmission flow through the installation of FACTS(Flexible AC Transmission system). This paper deals with the optimal site of the FACTS for reducing the congestion cost using a shadow price which is one of the economic signals for the systems. Test results show that the site of the FACTS(UPFC) is optimal to minimize the congestion cost by the proposed algorithm.

• Journal of Aerospace System Engineering
• /
• v.14 no.6
• /
• pp.26-35
• /
• 2020

The national satellite operation network, which supports multiple satellites, was designated as a Critical Information Infrastructure (CII) in 2017. The network was designed independently from the control network and the information network to enhance physical security. Planning is underway to establish a bidirectional data interface between networks. The data transmission system allows data flow only to the physical layer and the data link layer; hence, only one file can be transferred at any one time. This means that when large amounts of data are being transmitted, no other data can be sent simultaneously in urgent situations. Thus, this paper discusses the design of flexible packets for the transmission of data between networks in an environment where physical security has been enhanced through network separation and based on this, presents a method for transmitting data effectively.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.59-63
• /
• 2021

In order to broadcast 8K UHD, domestic broadcasting is upgrading production, operation, and transmission technologies in a new way that has various forms such as terrestrial broadcasting, IPTV, mobile, and streaming services. In order to overcome the existing SDI transmission technology that has reached its limit, new transmission technologies using ICT-based convergence such as IT, Network, IOT, and Big Data are developing. Internet Protocol(IP) transmission technology is an IT-based core protocol that transcends various broadcasting infrastructures. Therefore, it can be said that the technology for converting the broadcasting system based on IP is a natural one for preparing for 8K UHD in the future. In this paper, we propose an IP transmission system that adopts a network that can transmit 8K with hardware of 12G Serial Digital Interface (SDI), in order to prepare for the future broadcasting system according to the development of ALL IP interface technology.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.24-29
• /
• 2011

Comparing conventional one-way relaying, two-way relaying scheme with network coding can achieve high throughput by reducing the transmission time. Coded cooperation protocol, which is a algorithm that uses coding on physical layer, can achieve high reliability. In this paper, we propose coded cooperation protocol over two-way relay network. Simulation results show proposed protocol has better performance in terms of reliability and throughput compare with conventional amplify and forward protocol. Also, with same throughput, proposed protocol has better performance in terms of reliability compare with the conventional hybrid decoded and forward protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4087-4102
• /
• 2014

Two-way relaying is an effective way of improving system spectral efficiency by making use of physical layer network coding. However, energy efficiency in OFDM-based bidirectional relaying with asymmetric traffic requirement has not been investigated. In this study, we focused on subcarrier transmission mode selection, bit loading, and power allocation in a multicarrier single amplified-and-forward relay system. In this scheme, each subcarrier can operate in two transmission modes: one-way relaying and two-way relaying. The problem is formulated as a mixed integer programming problem. We adopt a structural approximation optimization method that first decouples the original problem into two suboptimal problems with fixed subcarrier subsets and then finds the optimal subcarrier assignment subsets. Although the suboptimal problems are nonconvex, the results obtained for a single-tone system are used to transform them to convex problems. To find the optimal subcarrier assignment subsets, an iterative algorithm based on subcarrier ranking and matching is developed. Simulation results show that the proposed method can improve system performance compared with conventional methods. Some interesting insights are also obtained via simulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.441-444
• /
• 2009

In this research, a hot and cold combined forging process for manufacturing net-shape one-way clutch bearing outer race of an automobile automatic transmission unit is developed. The process is composed of hot forging for manufacturing an optimized gear-like perform and precision cold forging for sizing the perform into final net-shape product. Finite element simulation techniques are applied to find the optimized process designs including blank and die shapes. The predictions and experiments are compared, revealing that they are in good agreement with each other. The dimensional test showed that the important dimensional requirements on gear tooth-like shape of the forged product were fulfilled.