• 제목/요약/키워드: One-Way Clutch

검색결과 18건 처리시간 0.03초

Effects of a One-Way Clutch on the Nonlinear Dynamic Behavior of Spur Gear Pairs under Periodic Excitation

  • Cheon Gill-Jeong
    • Journal of Mechanical Science and Technology
    • /
    • 제20권7호
    • /
    • pp.941-949
    • /
    • 2006
  • Nonlinear behavior analysis was used to verify whether a one-way clutch is effective for reducing the torsional vibration of a paired spur gear system under periodic excitation. The dynamic responses were studied over a wide frequency range by speed sweeping to check the nonlinear behavior using numerical integration. The gear system with a one-way clutch showed typical nonlinear behavior. The oscillating component of the dynamic transmission error was reduced over the entire frequency range compared to a system without a one-way clutch. The one-way clutch also eliminated unsteady continuous jump phenomena over multiple solution bands, and prevented double-side contact, even with very small backlash. Installing a one-way clutch on both sides of the gear system was more effective at mitigating the negative effects of external periodic excitation and various parameter changes than a conventional gear system without a one-way clutch.

원웨이클러치의 기어열 진동감소 효과에 관한 실험적 연구 (Experimental Study on the Reduction of Vibration of Gear Trains Due to a One-Way Clutch)

  • 천길정
    • 대한기계학회논문집A
    • /
    • 제35권11호
    • /
    • pp.1477-1482
    • /
    • 2011
  • 기어열의 입력축이나 출력축에 원웨이클러치를 설치하면 기어열의 진동을 효과적으로 감소 시킬 수 있다고 보고된 바 있으나, 아직까지 수치적 해석만이 행하여졌고 실험에 의한 검증이 이루어지지 않았다. 따라서 본 연구에서는 원웨이클러치를 가지는 기어열을 대상으로 동특성 실험을 수행하여, 원웨이클러치가 진동 감소에 효과적인지 여부의 타당성을 검증하였다. 클러치 설치 유무와 설치 위치에 따른 차이를 비교하기 위하여, 입력축과 출력축에 각각 클러치 설치 조건을 달리하면서 넓은 속도 범위에 걸쳐서 동특성을 측정 비교하였다. 실험 결과에 의해, 클러치가 기어물림 진동뿐만 아니라 입력축에서 전달되는 진동을 감소 시킴으로써, 기어열의 비틀림 진동 감소에 효과적임을 확인하였다.

충돌 예상 시나리오에 따른 모터 구동형 리트랙터의 잠김 작용 평가 (Evaluation of Motorized retractor locking mechanism based on predetermined collision scenarios)

  • 박재순;국민구;김대희;탁태오
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회A
    • /
    • pp.903-908
    • /
    • 2007
  • A retractor is the major component of a seatbelt system that restraints passengers by locking the movement of webbing. Recently, in order to increase the effectiveness of seatbelt systems, motorized retractors that remove slack and correct passenger posture just before airbag expansion when collision is predicted are widely used. Key component of motorized retractors is the one-way clutch that engages and disengages the winding action of webbing according to the direction of motor revolution. Analytical investigation of action of the one-way clutch mechanism has been carried out to figure out conditions for one-way locking, and to study the effect of various kinematic and dynamic design variables of one-way clutch. Using combination of ADAMS and LifeMOD soft-wares, dynamic simulation of operation of motorized retractors including Hybrid-III dummy model has been carried out to evaluate the performance of the motorized retractors in various crash scenarios.

  • PDF

압전회전작동기를 이용한 스텝모터에 관한 연구 (Research for Stepping Motor Using Piezoelectric Torsional Actuator)

  • 김준혁;김재환;정달도
    • 한국소음진동공학회논문집
    • /
    • 제15권4호
    • /
    • pp.499-505
    • /
    • 2005
  • In this paper, a new type of pi+ezoelectric stepping motor is designed, manufactured and tested. This motor is composed of piezoelectric torsional actuator and a pair of one-way clutch bearings. The torsional actuator consists of 16-polygonal tube of piezoceramic that can produce an angular displacement associated with shear mode. One-way clutch bearing converts oscillation of torsional actuator into a continuous stepping rotation. The proposed stepping motor does not require any conversion mechanism for stepping motion like any other motors. In the design process, the shear resonance mode of piezoelectric actuator is analyzed by using a commercial finite element analysis program, and the performance of the fabricated torsional actuator is measured. $0.124^{\circ}$ of maximum angular displacement is measured in square wave excitation on the actuator only. The stepping motor is manufactured by assembling a pair of one-way clutch bearings and the torsional actuator. The maximum rotation speed of 72rpm and the blocking torque of 3.136 mNm are measured at 3540 Hz and 100V/mm. Once the proposed piezoelectric stepping motor is miniaturized, it can be used for many compact and precise moving applications.

모터구동형 안전벨트 리트랙터의 구동 메커니즘 설계 (Driving Mechanism Design of a Motorized Seat Belt Retractor)

  • 탁태오;박재순;국민구;김대희;신승언;최석
    • 산업기술연구
    • /
    • 제26권A호
    • /
    • pp.55-61
    • /
    • 2006
  • Motorized retractors enhance the safety of passengers by removing the slack of webbing and by holding upright driving position. Reliability of a driving mechanism that includes one-way clutch between the driving motor and webbing is directly linked to the safety of passenger. In this research, conditions for locking one-way clutch, and also conditions for sustaining locking are theoretically investigated. The operation of a motorized retractor under realistic conditions is simulated in order to validate the proposed retractor design.

  • PDF

원웨이 클러치 베어링 외륜의 열간과 냉간 복합단조 공정 기술 개발 (Development of Hot and Cold Combined Forging Process for a One-Way Clutch Bearing Outer Race)

  • 장수진;전병윤;장성민;전만수;문호근;성현석;허민호
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.441-444
    • /
    • 2009
  • In this research, a hot and cold combined forging process for manufacturing net-shape one-way clutch bearing outer race of an automobile automatic transmission unit is developed. The process is composed of hot forging for manufacturing an optimized gear-like perform and precision cold forging for sizing the perform into final net-shape product. Finite element simulation techniques are applied to find the optimized process designs including blank and die shapes. The predictions and experiments are compared, revealing that they are in good agreement with each other. The dimensional test showed that the important dimensional requirements on gear tooth-like shape of the forged product were fulfilled.

  • PDF

트라이볼로지 변수가 원웨이클러치를 가지는 평기어쌍의 비선형 거동에 미치는 영향 (Effects of Tribological Parameters on the Nonlinear Behavior of a Spur Gear Pair with One-Way Clutch)

  • 천길정
    • Tribology and Lubricants
    • /
    • 제24권5호
    • /
    • pp.241-249
    • /
    • 2008
  • This paper describes the tribological effects on the nonlinear behavior of a spur gear pair with one-way clutch according to the direct contact elastic deformation model over a wide range of speeds, considering the hydrodynamic effects. The effects of various lubrication parameters, such as viscosity, film width, and friction, on the nonlinear dynamic behavior were analyzed. Forces due to the entraining velocity and the hydrodynamic friction were about two orders smaller than normal forces over the whole speed range. While the viscosity has a strong effect on the behavior of gear pair systems, friction has very little effect on torsional behavior. The inclusion of the hydrodynamic effect facilitates nonlinearity by increasing the overlap and damping, as well as decreasing elastic deformation and tooth reaction forces.

압전회전작동기를 이용한 스텝모터에 관한 연구 (Research for Step Motor using Piezoelectric Torsional Actuator)

  • 김준혁;정달도;김재환
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.279-282
    • /
    • 2004
  • In this paper, A new type of piezoelectric step motor using piezoelectric torsional actuator and a pair of one-way clutch bearing is designed, manufactured and tested. The torsional actuator consists of 16-polygonal tube that can produce angular displacement using shear mode of piezoceramic. One-way clutch bearing convert oscillation of torsional actuator into continuous rotation. After performance testing of torsional actuator, the optimum condition for driving motor is investigated in terms of wave shape, excitation frequency and electrical field. The performance of the motor is experimentally evaluated. As a result, square wave has larger rotation speed than sin wave, and the maximum rotation speed of 57 rpm is measured at 3850 Hz and 100V/mm.

  • PDF

모터 구동형 시트벨트 Retractor 개발 (Development of a Motorized Seatbelt Retractor)

  • 신윤수;김명동;박준형;김일환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
    • /
    • pp.336-338
    • /
    • 2006
  • Motorized retractors enhance the safety of passengers by removing the slack of webbing and by holding upright driving position. Reliability of a driving mechanism that includes one-way clutch between the driving motor and webbing is directly linked to the safety of passenger. In this research, conditions for locking one-way clutch and also conditions for sustaining locking are theoretically investigated. the operation of a motorized retractor under realistic conditions is simulated in order to validate the proposed retractor design.

  • PDF