• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.3-9
• /
• 2009

When washing machine is rotated in the laundry, it tends to lean toward one side. This tendency causes a serious vibration. The balance of washing machine plays an important role in order to reduce the vibration by injecting the sand or the salt water into the balance of washing machine. The hot plate welder is used to prevent from outflow of contents. The hot plate welder brings about many problems which is concerned with accidents. The direction recognition and location information of the balance are required in this system. In this paper, the recognition direction of balance in washing machine using machine vision system is studied. The template matching algorithm compares sub-image with original image acquired in real-time to obtain a center point of balance image. The mid points and the edges of balance are estimated by the edge detection and gauging algorithms. The data acquired by these results is used for recognition direction of balance. The automation software for image processing is developed by using LabVIEW.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.1
• /
• pp.23-28
• /
• 2012

In this paper, we proposed and developed a fast and efficient real time face detection and recognition which can be run on embedded system instead of high performance desktop. In the face detection process, we detect a face by finding eye part which is one of the most salient facial features after applying various image processing methods, then in the face recognition, we finally recognize the face by comparing the current face with the prepared face database using a template matching algorithm. Also we optimized the algorithm in our system to be successfully used in the embedded system, and performed the face detection and recognition experiments on the embedded board to verify the performance. The developed method can be applied to automatic door, mobile computing environment and various robot.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.72-77
• /
• 2017

This paper focuses on the development of a supporting S/W tool for the automated design of an automotive press trim die. To define the die design process based on automation, we analyze the press die design process of the current industry and group repetitive works in the 3D modeling process. The proposed system consists of two modules, namely the template models of the trim steel parts and UI function for their auto-positioning. Four kinds of template models are developed to adapt to various situations and the rules of the interaction formula which are used for checking and correcting the directions of the datum point, datum curve, datum plane are implemented to eliminate errors. The system was developed using CATIA Knowledgeware, CAA(CATIA SDK) and Visual C++, in order for it to function as a plug-in module of CATIA V5, which is one of the major 3D CAD systems in the manufacturing industry. The developed system was tested by applying it to various panels of current automobiles and the results showed that it reduces the time-cost by 74% compared to the traditional method.

• Coupled systems mechanics
• /
• v.3 no.1
• /
• pp.1-25
• /
• 2014

In this work, we present the theoretical formulation, operator split solution procedure and partitioned software development for the coupled thermomechanical systems. We consider the general case with nonlinear evolution for each sub-system (either mechanical or thermal) with dedicated time integration scheme for each sub-system. We provide the condition that guarantees the stability of such an operator split solution procedure for fully nonlinear evolution of coupled thermomechanical system. We show that the proposed solution procedure can accommodate different evolution time-scale for different sub-systems, and allow for different time steps for the corresponding integration scheme. We also show that such an approach is perfectly suitable for parallel computations. Several numerical simulations are presented in order to illustrate very satisfying performance of the proposed solution procedure and confirm the theoretical speed-up of parallel computations, which follow from the adequate choice of the time step for each sub-problem. This work confirms that one can make the most appropriate selection of the time step with respect to the characteristic time-scale, carry out the separate computations for each sub-system, and then enforce the coupling to preserve the stability of the operator split computations. The software development strategy of direct linking the (existing) codes for each sub-system via Component Template Library (CTL) is shown to be perfectly suitable for the proposed approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.283-290
• /
• 2006

The cellular neural networks have the structure that consists of an array of the same cell which is a simple processing element, and each of the cells has local connectivity and space invariant template properties. So, it has a very suitable structure for the hardware implementation. But, it is impossible to have a one-to-one mapping between the CNN hardware processors and the pixels of the practical large image. In this paper, a $5{\times}5$ CNN hardware processor with pipeline input and output that can be applied to the time-multiplexing processing scheme, which processes the large image with a small CNN cell block, is designed. the operation of the implemented $5{\times}5$ CNN hardware processor is verified from the edge detection and the shadow detection experimentations.

• Journal of fish pathology
• /
• v.24 no.2
• /
• pp.65-73
• /
• 2011

In analysis of DNA viruses from the contaminated shellfish using PCR, preparation method of template DNA is an important factor to get enough copy number of viruses. In this study, we evaluated the efficiency of PCR template of Megalocytivirus (sT50mg-D) DNA obtained from 50 mg digestive gland homogenate of oyster using commercial method, and compared with that obtained from 5 g of the same tissues (T5g-D) after PEG precipitation procedures of virus. Both templates DNA suspended in the same volume of distilled water showed positive results by primary PCR with 35 cycles, and the presence of Megalocytivirus was confirmed in oysters collected from cultured farms in Korea. Moreover, PCR with sT50mg-D allowed us to discriminate the contaminated oyster individually, that can not be done in PCR with T5g-D prepared from the mixture of three different individual oyster to get 5 g digestive gland homogenate. In quantitative analysis with real time PCR, Megalocytivirus concentrations in 50 ${\mu}l$ templates prepared using 0.5~50 mg of one positive sample were appeared in the range 6.14E+00~1.2E+02/${\mu}l$. We were not able to get positive result using template DNA contained less than 6.14E+00 copies. Consequently, 2-step PCR performed with DNA extracts from oyster homogenate of small amount (sT50mg-D) i) was enough to detect the contaminated Megalocytivirus in shellfish, ii) allowed us to do the analysis for individual shellfish rather than mixture of several shellfish and iii) showed the presence of Megalocytivirus in oyster from Korea.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.525-534
• /
• 2016

The biological wastewater treatment plant, which uses microbial community to remove organic matter and nutrients in wastewater, is known as its nonlinear behavior and uncertainty to operate. Therefore, operation of the biological wastewater treatment process much depends on observation and knowledge of operators. The manual inspection of human operators is essential to manage the process properly, however, it is impossible to detect a fault promptly so that the process can be exposed to improper condition not securing safe effluent quality. Among various process faults, equipment malfunction is critical to maintain normal operational state. To detect equipment faults automatically, the dynamic time warping was tested using on-line oxidation-reduction potential (ORP) and dissolved oxygen (DO) profiles in a sequencing batch reactor (SBR), which is a type of wastewater treatment process. After one cycle profiles of ORP and DO were measured and stored, they were warped to the template profiles which were prepared already and the distance result, accumulated distance (D) values were calculated. If the D values were increased significantly, some kinds of faults could be detected and an alarm could be sent to the operator. By this way, it seems to be possible to make an early detecting of process faults.

• Journal of the Korea Convergence Society
• /
• v.5 no.4
• /
• pp.101-106
• /
• 2014

Most peoples are used to prefer to view the video contents rather than the other contents since the video contents are more easy to understand with both their eyes and ears. As the wide spread use of smartphones, the demands for the contents services are increasing rapidly. To promote the contents business, it's important to provide security of subscriber authentication and corresponding communication channels through which the contents are delivered. Generally, symmetric key encryption scheme is used to protect the contents in the channel, and the session key should be upadated periodically for the security reasons. In addition, to protect viewing paid contents by illegal users, the proxy authentication should not be allowed. In this paper, we propose biometric based user authentication and one time key generation models. The proposed model is consist of biometric template registration, session key generation and chanel encryption steps. We analyze the difference and benefits of our model with existing CAS models which are made for CATV contents protection, and also provides applications of our model in electronic commerce area.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1131-1134
• /
• 2009

Preparation of graded materials displaying gradients of desired properties is one of the important issues and less-developed areas in materials chemistry. For the first time we demonstrate facile control of porosity and length in the pores of AAO template in lateral directions by controlled dipping method. To demonstrate the versatility of the proposed method, laterally graded silica nanotubes are also prepared by using the laterally graded AAO templates. The method demonstrated here will open numerous possibilities for obtaining a variety of graded materials with lateral gradients of catalytic, electrochemical, mechanical and optical properties on the nanoscale.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.71-75
• /
• 2009

Purpose: Recently, orbital wall fracture is common injuries in the face. Facial CT is essential for the accurate diagnosis and appropriate treatment to reconstruct of the orbital wall. The objective of this study was to report the method for accurate measurement of area and shape of the bony defect in the blow-out fractures using facial CT in prior to surgery. Methods: The authors experienced 46 cases of orbital wall fractures and examined for diplopia, sensory disturbance in the area of distribution of the infraorbital nerve, and enophthalmos in the preoperation and followed 1 months after surgery, from August 2007 to May 2008. Bony defect was predicted by measuring continuous defect size from 3 mm interval facial CT. Copying from the defect model (template), we reconstructed orbital wall with resorbable sheet (Inion $CPS^{(R)}$ Inion Oy, Tampere, Finland). Results: One months after surgery using this method, 26 (100%) of the 26 patients improved in the diplopia and sensory disturbance in the area of distribution of the infraorbital nerve. Also 8 (72.7%) of the 11 patients had enophthalmos took favorable turn. Conclusion: This accurate and time-saving method is practicable for determining the location, shape and size of the bony defect. Using this method, we can reconstruct orbital wall fracture fastly and precisely.