• Korean Journal of Microbiology
• /
• v.12 no.4
• /
• pp.180-187
• /
• 1974

Of the Asp. spp. isolated by the Institute of Applied Microbiology, Kon-Kuk University, 7 strains were selected for the study of the immunological differencences among them using gel precipitation test. The strains were the following types : 1 type of flavus and 2 types of oryzae were isolated from Meju ; 1 type of flavus from Nuruk ; and each one type of flavus, parasiticus and oryzae from Kokja.Asp.flavus from ATCC, Asp. parasiticus nad Asp. niger NRRL strains were also used in the study as a standard. From this study, several points can be raised ; 1) There was no common antigenic property between Asp. niger and Asp. flavus, because of no formation of reaction line. Therefore, all strains could be easily distinguished. 2) There was common antigenic property, that is, the formation of reaction line between Asp. flavus and Asp. parasticus. Accordingly two strains could not be easily distinguished by the gel precipitation test. 3) Each type of oryzae, parasiticus and flavus of Asp. flavus group had common antigen one another as well as specific antigens only in the difference of the reaction lines, so they could be easily identified in the gel precipitation test. 4) Each isolated strain from Meju and Nuruk appeared to be identical. 5) It was shown that the gel precipitation test of serological methods was very useful for the classification of Asp. spp.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.42-48
• /
• 2020

This study is on the injection molding analysis for the LED outdoor lighting top cover of one heat sink body type structure. Thermoplastic and thermosetting resins were applied to compare the thermal properties during the injection molding process. The thermoplastic resin is used in this study due to special characteristics that it is light, good strength and dose long not transmute quality even if pass long time. The thermosetting resin is applied to this study due to good in strength, lightweight and excellent etc, thermal conductivity. This study presented a preliminary analysis of fill time, weld line, air trap etc. for the injection molding process of LED lamp cover and body through simulation using Moldflow. As a result of the study, it was selected HTM-102 material because the thermosetting resin has excellent strength and heat conductivity.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.601-606
• /
• 2011

There are lots of examples for naming railway lines and stations in Korea. In general, we can specify some type of principles for making names at the railway lines. The first, rail line name made some decision considering the origin and destination name of city or region. The second type of a decision making is the location or service areas of that railway line or station. And other one is about the destination city or region of that corridor line. In this paper, we classified the name of the railway line according to above three types of decision principles, and then suggested the guideline and future directions preventing any confusion to make a new railway line name afterwards.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.680-688
• /
• 2015

Hybrid type combined transmission systems is being operated by AC and DC line at the same space will be expanded instead of the overhead line. However, such hybrid type combined system has problem like the arrangement selection of DC cable for effective system operation. In this paper, to select the proper arrangement of DC cable, induced voltage of DC cable influenced by AC cable was analyzed in case of several type arrangement of DC cable. Such induced voltage is in detailed analyzed not only in case of steady, but transient state. The arrangement which has the lowest induced voltage is selected as the proper one. EMTP/ATPDraw is used for modeling and analysis of hybrid type combined transmission system.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.960-962
• /
• 2005

In this paper, we investigated the quench characteristics of high-Tc superconducting(HTSC) elements in the integrated three-phase flux-lock type superconducting fault current limiter(SFCL) according to fault types such as the single-line-to-ground fault, the double-line-to-ground fault, the line-to-line fault and the triple-line-to-ground fault. The integrated three-phase flux-lock type SFCL is an upgrade version of single-phase flux-lock type SFCL. The structure of the integrated three-phase flux-lock type SFCL consisted of a three-phase flux-lock reactor wound on an iron core with the ratio of the same turn between coil 1 and coil 2 in each phase. When the SFCL is under the normal condition, the flux generated in the iron core is zero because the flux generated between two coils of each single phase is canceled out. Therefore, the SFCL's impedance is zero, and the SFCL has negligible influence on the power system. However, if a fault occurs in any single one of three phases, the flux generated in the iron core is not zero any more. The flux makes HTSC elements of all phases to quench irrespective of the fault type, which reduces the current in fault phase as well as the current of sound phase. It was obtained that the fault current limiting characteristics of the suggested SFCL were dependent on the quench characteristics of HTSC elements in all three phases.

• Journal of the Korean Society of Costume
• /
• v.52 no.6
• /
• pp.51-69
• /
• 2002

The purpose of this study was to classify the body shapes. exclusive of size and corpulence factors of more than 60-year old elderly women by distinctions, and to investigate the visual effects of combination of ensemble suit details. For the body shape classification, the factor analysis and cluster analysis were performed : the mean value difference of numeral values for classified types were tested by ANOVA : and the follow-up test was conducted by the Duncan's multiple ranged test. The data analysis for visual effects evaluated by a multiple ranking test was analysed by mean. paired t-test, ANOVA and Duncan's multiple ranged test. The results are summarized as follows : 1. The followings are the types of body shape according to the shape factors of the front line of body for elderly women. The distinctions of the front li e of elderly women's body could be presumed; that was, Body typeⅠ was a comparatively well-balanced body type, Body type Ⅱ was close to an average body type. and Body type In was a severely corpulent body type. 2. The followings are the results on the physical visual effects inducing the constituents of clothing type. 1) The neckline·collar types of a jacket have a great influence on the visual effects of the upper body, and orderly. the tailored collar. soutien collar, and round neckline had positive influence on the visual effects in the upper body. 2) The pleat types of one-piece dress had positive influence on the visual effects in the lower body in the order of gored type, pleats type, and gathered type. Also. the balance in the lower body had more influence on the overall balance of the clothing compared to the constituents of clothing type such as neckline collar type or opening line. 3) It showed that whether there is the front opening line of a jacket influenced on the visual effects of all categories.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.6
• /
• pp.518-523
• /
• 2005

Strip off-center is one of the major problems in hot strip mill line. The key to good centering is having good equipment, modern control systems, excellent maintenance and an understanding of milling process. Therefore, this study aims to develop a system that is useful for quantitative analysis of strip off-center. In this study, the measuring method of strip off-center was thoroughly studied and the exclusive control board to line scan camera were designed. Also, the manipulated type housing for line scan camera was developed to adjust initial parameters for strip width and center line. In order to check the accuracy and usefulness of the developed system, FM stand in $\#2$ Hot Strip Factory in Pohang Steel Works was targeted.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.91-97
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.2
• /
• pp.83-101
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.282-290
• /
• 2011

The public festival has a positive function to produce more pleasure and better life to urban residents on viewpoint of culture marketing. A research of relation between urban festival's media light environmental and personality type of audiences would give a design guide line on selection of festival media contents. The scope of study festival bounds three urban fesitvals from two thousand eight to two thousand ten. The personaliy indicator is used by self-mootioring scale called NEO-PI-R that Synyder, psychologist established in 1987. This indicator divides into five classes - N: Neutroticism, E: Extaversoon, O: Openness, A: Agreeableness, C: Conscientiousness. As a result, Anaysis of urban festival's media light environments considering five personality type of audiences are described, N type prefers the change a lot and low stability. E type prefers three dimensional video and dynamic production with passionate pressure. O type prefers radiates objects to promote the imaginative creatures with speculation. A type prefers contemplation arts with one way direction. C type prefers orderly art layout with accomplishing intention. The statistics datas anaynize ten factors to describe the urban complicated fesitival guide line clearly.