• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.272-274
• /
• 2003

유한체 GF(2$^{m}$ ) 상의 산술 연산 중 곱셈 연산의 효율적인 구현은 암호이론 분야의 어플리케이션에서 매우 중요하다. 본 논문에서는 All-One 다항식에 의해 정의된 GF(2$^{m}$ ) 상의 효율적인 Bit-Parallel 정규기저 곱셈기를 제안한다. 게이트 및 시간 면에서 본 논문의 곱셈기의 complexity는 이전에 제안된 같은 종류의 곱셈기 보다 낮거나 동일하다. 그리고 본 논문의 곱셈기는 이전 곱셈기 보다 더 모듈적이어서 VLSI 구현에 적합하다.

• The Research Journal of the Costume Culture
• /
• v.24 no.3
• /
• pp.287-300
• /
• 2016

The purpose of this study was to review materials that could provide basic data about sports brassieres. In this study, 486 sports brassieres were collected online from 31 brands between November 2015 and February 2016. First, the comparison of compression and encapsulation in sports brassieres identified many different styles. The characteristics of compression brassieres included a cut cup, the front center height of a full cup, round neckline, short front hem, all in one shoulder strap with a patterned racerback design, all in one closure, no wire, and separation cup styles. The characteristics of encapsulation brassieres included a V-shape neckline, mixed round shoulder strap design, back closure, and all in one cup. Second, the comparison of domestic and international sports brassieres sorted the items differently. The characteristics of domestic products included compression brassieres, non-cut cup, the front center height of a full cup, round neckline, short front hem, an all in one shoulder strap with a patterned round design, all in one closure, no wire, and a separation cup. The characteristics of international products included a cut up, racerback shoulder strap design, and an all in one cup. Third, the analysis of domestic and international sports brassieres sizes found that six options were available for domestic compression sports brassieres and nine sizes were available for international products. Domestic encapsulation sports brassieres offered five under bust sizes and five cup sizes. International products offered eight under bust sizes and sixteen cup sizes.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.1_2
• /
• pp.51-58
• /
• 2004

Most of pubic-key cryptosystems are built on the basis of arithmetic operations defined over the finite field GF$GF(2^m)$ .The other operations of finite fields except addition can be computed by repeated multiplications. Therefore, it is very important to implement the multiplication operation efficiently in public-key cryptosystems. We propose an efficient bit-parallel normal basis multiplier for$GF(2^m)$ fields defined by All-One Polynomials. The gate count and time complexities of our proposed multiplier are lower than or equal to those of the previously proposed multipliers of the same class. Also, since the architecture of our multiplier is regular, it is suitable for VLSI implementation.

• Journal of Biomedical Engineering Research
• /
• v.40 no.5
• /
• pp.197-205
• /
• 2019

The existing Extracorporeal membrane oxygenation(ECMO) and Cardiopulmonary bypass system(CPB) have been developed and applied to various devices according to their respective indications. However, due to the complicated configuration and difficult usage method, it causes inconvenience to users and there is a risk of an accident. Therefore, smart all-in-one cardiopulmonary circulation device is being developed recently. The smart all-in-one cardiopulmonary assist device consists of a blood pump for cardiopulmonary bypass, a blood oxidizer for cardiopulmonary bypass, a blood circuit for cardiopulmonary bypass, and an artificial cardiopulmonary device. It is an integrated cardiopulmonary bypass device that can be used for a variety of purposes such as emergency, intraoperative, post-operative intensive care, and long-term cardiopulmonary assist, combined with CPB used in open heart surgery and ECMO used when patient's cardiopulmonary function does not work normally. The smart all-in-one cardiopulmonary assist device does not exist as a standard and international standard applicable to advanced medical devices. Therefore, in this study, we will refer to the International Standard for Blood Components, the International Standard for Blood, the Guideline for Blood Products, and prepare applicable performance and safety guidelines to help quality control of medical devices, and contribute to the improvement of the health of people. The guideline, which is the result of conducted a survey of the method of safety and performance test, is based on the principle of all-in-one cardiopulmonary aiding device, related domestic foreign standards, the status of domestic and foreign patents, related literature, blood pump(ISO 18242), blood oxygenator (ISO 7199), and blood circuit (ISO 15676) for cardiopulmonary bypass.The items on blood safety are as follows: American Society for Testing and Materials ASTM F1841-97R17), and in the 2010 Food and Drug Administration's Safety Assessment Guidelines for Medical Assisted Circulatory Devices. In addition, after reviewing the guidelines drawn up through expert consultation bodies including manufacturers / importers, testing inspectors, academia, etc. the final guideline was established through revision and supplementation process. Therefore, we propose guidelines for evaluating the safety and performance of smart all-in-one cardiopulmonary assist devices in line with growing technology.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.445-451
• /
• 2006

The purposes of this study were to compare the effects of one or two applications of all-in-one adhesives on microtensile bond strengths (${\mu}$TBS) to unground enamel and to investigate the morphological changes in enamel surfaces treated with these adhesives using a scanning electron microscopy (SEM). Twenty-five noncarious, unrestored human mandibular molars were used. The unground enamel surfaces were cleansed with pumice. The following adhesives were applied to lingual, mid-coronal surfaces according to manufacture's directions; Clearfil SE bond in SE group, Adper Prompt L-Pop$^{TM}$1 coat in LP1 group, 2 coats in LP2 group, Xeno$^{\R}$III1 coat in XN1 group, and 2 coats in XN2 group. After application of the adhesives, a hybrid light-activated resin composite was built up on the unground enamel. Each tooth was sectioned to make a cross-sectional area of approximately 1.0 mm$^2$ for each stick. The microtensile bond strength was determined. Each specimen was observed under SEM to examine the morphological changes. Data were analyzed with one-way ANOVA. The results of this study were as follows; 1. The microtensile bond strength values were; SE (19.77 ${\pm}$ 2.44 MPa), LP1 (13.88 ${\pm}$ 3.67 MPa), LP2 (14.50 ${\pm}$ 2.52 MPa), XN1 (14.42 ${\pm}$ 2.51 MPa) and XN2 (15.28 ${\pm}$ 2.79 MPa). SE was significantly higher than the other groups in bond strength (p < 0.05). All groups except SE were not significantly different in bond strength (p < 0.05). 2. All groups were characterized as shallow and irregular etching patterns.

• Journal of the Korean Mathematical Society
• /
• v.48 no.1
• /
• pp.63-82
• /
• 2011

On the hyperbolic space $D^n$, codimension-one totally geodesic foliations of class $C^k$ are classified. Except for the unique parabolic homogeneous foliation, the set of all such foliations is in one-one correspondence (up to isometry) with the set of all functions z : [0, $\pi$] $\rightarrow$ $S^{n-1}$ of class $C^{k-1}$ with z(0) = $e_1$ = z($\pi$) satisfying |z'(r)| ${\leq}1$ for all r, modulo an isometric action by O(n-1) ${\times}\mathbb{R}{\times}\mathbb{Z}_2$. Since 1-dimensional metric foliations on $D^n$ are always either homogeneous or flat (that is, their orthogonal distributions are integrable), this classifies all 1-dimensional metric foliations as well. Equations of leaves for a non-trivial family of metric foliations on $D^2$ (called "fifth-line") are found.

• Journal of Chest Surgery
• /
• v.19 no.4
• /
• pp.595-605
• /
• 1986

From February 1986 through September 1986, the authors have experienced 6 cases of coronary artery bypass graft for patients with unstable angina. There were five males and one female who ranged from 39 to 65 years [mean, 53.3 years]. The extent of coronary disease was as follows: one-, two- and three-vessel diseases, all 2 cases respectively, and among them, 1 case had left main disease. Distal anastomoses were performed first with using saphenous vein grafts as conduits in all cases and sequential bypass methods were employed in 5 cases. Numbers of vein grafts were two in 2 cases and one in 4 cases. The mean time wasted for one distal anastomosis was 36 minutes. Post operative complications were leg-wound disruption [2 cases], transient psychosis [1 case] and perioperative myocardial infarction [MI] [1 case]. Sixty three year-old male patient associated with cardiomegaly, prior MI, ventricular arrhythmia, cardiac dysfunction and endocrinologic diseases preoperatively was expired in the operating room due to perioperative Ml. All survivors were asymptomatic and on discontinuing medical therapy on follow-up varying from 1 to 8 months.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1045-1047
• /
• 2017

In this study, we focused on development of the all-in-one case insulation for end-burning solid rocket motors. Material of insulation used unvulcanized rubber based on EPDM/kevlar. In case of boots insulation, preforms was made by using hot press molding, and then the tape was inserted between two preforms for all-in-one curing in the case. Finally bladder method was applied for curing of insulation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.85-90
• /
• 2003

This paper proposes a modular multiplier based on LFSR (Linear Feedback Shift Register) architecture with efficient area complexity over GF(2/sup m/). At first, we examine the modular exponentiation algorithm and propose it's architecture, which is basic module for public-key cryptosystems. Furthermore, this paper proposes on efficient modular multiplier as a basic architecture for the modular exponentiation. The multiplier uses AOP (All One Polynomial) as an irreducible polynomial, which has the properties of all coefficients with '1 ' and has a more efficient hardware complexity compared to existing architectures.

• Honam Mathematical Journal
• /
• v.40 no.2
• /
• pp.211-218
• /
• 2018

Let R be a commutative Noetherian ring, a be an ideal of R and M be an R-module. It is shown that if $Ext^i_R(R/a,M)$ is minimax for all $i{\leq}{\dim}\;M$, then the R-module $Ext^i_R(N,M)$ is minimax for all $i{\geq}0$ and for any finitely generated R-module N with $Supp_R(N){\subseteq}V(a)$ and dim $N{\leq}1$. As a consequence of this result we obtain that for any a-torsion R-module M that $Ext^i_R(R/a,M)$ is minimax for all $i{\leq}dim$ M, all Bass numbers and all Betti numbers of M are finite. This generalizes [8, Corollary 2.7]. Also, some equivalent conditions for the cominimaxness of local cohomology modules with respect to ideals of dimension at most one are given.