• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.1-8
• /
• 1990

In this paper, the transient electromagneti wave scattering at dielectric cylinder is studied by new numerical analysis method. Basic formulation of boundary integral equation (BIE) for numerical method is started weighted residual technique. BIE is made to two simultaneous equation at surface inner and outside point of dielectric cylinder in extended boundary condition (EBC) and surface boundary condition (SBC). Numerical method is used Boundary element method (BEM) that is two form, one is direct method and the other is indirect method, so that this method that transformes operator inversion martics is used numerical analysis. A good agreement of this numerical solution and the other results is obtained.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.300-305
• /
• 1998

Kinetics of termonomer emulsion polymerization during interval II (i.e, after completion of latex particle formation) were studied through pseudo-homopolymerization (PHP) method. Extended Smith-Ewart equation and equation of instantaneous polymer composition are respectively reduced to the corresponding equation for homopolymerization by defining average rate constants. Average number of radicals per particle and instantaneous polymer compositions were respectively predicted by varying termonomer composition within latex particles for systems containing no more than one growing radical per particle. Styrene-Methyl methacrylate-Acrylonitrile (SMA) system was used for model calculation.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.155-163
• /
• 1999

A numerical study for simulating a swirling pulverized coal combustion in axisymmetric geometry is done here by applying the weighted sum of gray gases model (WSGGM) approach with the discrete ordinate method (DOM) to model the radiative heat transfer equation. In the radiative transfer equation, the same polynomial equation and coefficients for weighting factors as those for gas are adopted for the coal/char particles as a function of partial pressure and particle temperature. The Eulerian balance equations for mass, momentum, energy, and species mass fractions are adopted with the standard ${\kappa}-{\varepsilon}$ turbulence model, whereas the Lagrangian approach is used for the particulate phase for soot. The eddydissipation model is employed for the reaction rate for gaseous mixture, and the single-step first-order reaction model for the devolatilization process for coal. By comparing the numerical results with experimental ones, the models used here are confirmed and found to be one of good alternatives for simulating the combustion as well as radiative characteristics.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.9
• /
• pp.655-659
• /
• 1987

This study presents a model of the electrical characteristics of the high-pressure mercury vapour arc discharge. Energy balance equation per unit volume of the arc tube is converted into the one per unit length by assuming the parabolic radial temperature distribution and integrating over the cross-section of the tube. Using this energy balance equation, together with the circuit equation and Ohm's law, the arc voltage and current variation for 1 cycle is numerically calculated and a good result is obtained. A simple method to calculate the axis temperature of the arc tube and the radiation output is also presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.413-416
• /
• 2000

The spent fuel skeleton is processed in the cutting processing after compacting. If the cutting length is processed in the same interval length. The spent fuel skeleton is stayed on the connection of bottom nozzle and guide tube. In the case, because the compressive stress is loaded along the length, the guide tube is generated the buckling stress and the deforming. But the deformed guide tube interrupted the guide tube inserted through compressive room. therefore, it is experimented for the optimum buckling stress and the preventing of guide deformed. This paper is predicted the all over buckling stress of the spent fuel skeleton by using experiment. The guide of Spent fuel skeleton have buckling characteristics of the medium column. The experiment and analysis is conducted by the comparing among the equation of Euler, Johnson and Engresser. The fittest one of method is Engresser equation.

• Journal of the Korea Concrete Institute
• /
• v.12 no.3
• /
• pp.77-85
• /
• 2000

Various concretes are used for construction works depending on the types of structure, building element and method of construction. An internal vibration work is one of the important processes for adequately pouring various concrete into a certain form. This study was undertaken to find out the effects of internal vibration on flowability of fresh concrete by concrete flow test under eight conditions of vibration. Presumable equation models also were created to show all vibration effects without regard to kinds of concrete. As the results of this study, the degree of vibration effects were varied according to the properties of concrete. Acceleration amplitude of vibration that applied to fresh concrete was effective value of the properties of vibration in a viewpoint of flowability. Moreover, This research presents the presumed equation models including variables created by acceleration amplitude and measuring value of vibrated concrete flow test. These models are presumable methods of vibration effects regardless of kinds of concrete.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.1 no.4
• /
• pp.171-181
• /
• 1977

This paper is aiming at calculating NOx concentration, which is one of the harmhul components of emission from the gasoline engine, formed in the combustor through the presess of combustion. Instantaneous temperature and concentration of each components for each division can be determined by the solution of simulatneous equation of reaction equation and equation of energy conservation, inputting the estimated temperature with a considerably wide rage of temperature. After determining instantaneous temperature and instantanous concentration of each components, the nonequilibrium calculation is performed based on the reaction kinetics in order to determine NOx concentration. To summarize the result abtained from the above method ;through the passage of NO concentration, NO concentration is the highest in the first division and it is gradually decreasing through the following divisions In the final division, NO concentation is the lowest.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.70-76
• /
• 1985

A four-bar mechanism in consideration of the tolerances on link lengths and the clearances in joints is optimally designed by the method of stochastic analysis. The random nature of clearances and tolerances establishes a stochastic optimization design equation in which the parameters in the equation are described by random variables. In order to solve the design equation, the stochastic problem is converted into an equivalent deterministic one. The synthesis of four-bar mechanism for minimum mechanical and structural errors is carried out by the optimization techni- ques using Chebyshev spacing of precision points. By the results from the synthesized mechanism, the generated and desired motions are examined.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.215-219
• /
• 2003

Buckling and post-buckling Analysis of Ludwick type and modified Ludwick type elastic materials was carried out. Because the constitutive equation, or stress-strain relationship is different from that of linear elastic one, a new governing equation was derived and solved by $4^{th}$ order Runge-Kutta method. Considered as a special case of combined loading, the buckling under both point and distributed load was selected and researched. The final solution takes distinguished behavior whether the constitutive relation is chosen to be modified or non-modified Ludwick type as well as linear or non-linear. We also derived strain energy function for non-linear elastic constitutive relationship. By doing so, we calculated the criterion function which estimates the stability of the equilibrium solutions and determines critical buckling load for non-linear cases. We applied this theory to the constitutive relationship of fabric, which also is the non-linear equation between the applied moment and curvature. This results has both technical and mathematical significance.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.6
• /
• pp.708-717
• /
• 2007

In the present study, one of the widely applied equations for gas-solid cyclones, Leith and Licht model, was evaluated based on the 3-D CFD technique. The initial and boundary values of radial position and tangential velocity obtain-ed from the CFD simulation enabled complete calculation of the nonlinear second differential equation. This approach showed about 30% errors between calculations with and without the second order differential term. The calculation by using the simple first order equation presented shorter times to migrate up to the inner wall of the cyclone than by the second order, which theoretically implies higher separation efficiency. Further comparison is now under evaluation in terms of the detailed grade efficiency.