• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.380-387
• /
• 2017

This study was carried out to determine fertilization effects on allometric equations and biomass production in a Moso bamboo (Phllostachys pubescens) stand of the Gajwa National Experimental Forests, Jinju, Korea. The study site was fertilized for approximately 30 years to produce edible bamboo shoots. Total 20 bamboos (10 fertilized and 10 unfertilized) were cut to develop allometric equations and to estimate biomass accumulation of each bamboo component. Allometric equations of each bamboo component in the fertilized and unfertilized plots were significant (P < 0.05) with diameter at 20 cm from ground ($D_{20}$), diameter at breast height (DBH), culm height (H), and $DBH^2{\cdot}H$. Aboveground biomass estimated by the allometric equations (DBH) was significantly higher in the unfertilized plots ($106.38Mg\;ha^{-1}$) in culm density of $6,833culm\;ha^{-1}$ than in the fertilized ($57.68Mg\;ha^{-1}$) plots in culm density of $4,633culm\;ha^{-1}$. The proportion of each biomass component was culm (79%), followed by branches (14%) and leaf (7%) in the fertilized plots, whereas it was culm (81%), followed by branches (13%), and leaf (6%) in the unfertilized plots. The results indicate that aboveground biomass accumulation in a Phllostachys pubescens stand was little affected by fertilizer application because of the difference of culm density.

• Journal of Food Hygiene and Safety
• /
• v.14 no.4
• /
• pp.319-326
• /
• 1999

Recently, it is continuously rising to concern about the health risk being induced by microorganisms in food such as Escherichia coli O157:H7 and Listeria monocytogenes. Various organizations and regulatory agencies including U.S.FPA, U.S.DA and FAO/WHO are preparing the methodology building to apply microbial quantitative risk assessment to risk-based food safety program. Microbial risks are primarily the result of single exposure and its health impacts are immediate and serious. Therefore, the methodology of risk assessment differs from that of chemical risk assessment. Microbial quantitative risk assessment consists of tow steps; hazard identification, exposure assessment, dose-response assessment and risk characterization. Hazard identification is accomplished by observing and defining the types of adverse health effects in humans associated with exposure to foodborne agents. Epidemiological evidence which links the various disease with the particular exposure route is an important component of this identification. Exposure assessment includes the quantification of microbial exposure regarding the dynamics of microbial growth in food processing, transport, packaging and specific time-temperature conditions at various points from animal production to consumption. Dose-response assessment is the process characterizing dose-response correlation between microbial exposure and disease incidence. Unlike chemical carcinogens, the dose-response assessment for microbial pathogens has not focused on animal models for extrapolation to humans. Risk characterization links the exposure assessment and dose-response assessment and involve uncertainty analysis. The methodology of microbial dose-response assessment is classified as nonthreshold and thresh-old approach. The nonthreshold model have assumption that one organism is capable of producing an infection if it arrives at an appropriate site and organism have independence. Recently, the Exponential, Beta-poission, Gompertz, and Gamma-weibull models are using as nonthreshold model. The Log-normal and Log-logistic models are using as threshold model. The threshold has the assumption that a toxicant is produce by interaction of organisms. In this study, it was reviewed detailed process including risk value using model parameter and microbial exposure dose. Also this study suggested model application methodology in field of exposure assessment using assumed food microbial data(NaCl, water activity, temperature, pH, etc.) and the commercially used Food MicroModel. We recognized that human volunteer data to the healthy man are preferred rather than epidemiological data fur obtaining exact dose-response data. But, the foreign agencies are studying the characterization of correlation between human and animal. For the comparison of differences to the population sensitivity: it must be executed domestic study such as the establishment of dose-response data to the Korean volunteer by each microbial and microbial exposure assessment in food.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.554-564
• /
• 2017

The purpose of this study is to assist farmers in determining the optimal time for the shipment of stored apples by investigating the market trends, storage status and release dates of low-temperature stored apples. We surveyed 300 apple cultivation farms in Daegu, Gyeongbuk Province, which is the main producer of apples, and examined the cultivars, cultivation areas, storage conditions, and shipment status of apples. The main results are as follows: the proportion of apples cultivatedat different ripening times was surveyed. According to the results, the proportions of early, middle and late varieties were 78.3%, 63.7% and 96.0%, respectively. Also, 48.7% of the farm households surveyed had cold storage facilities. The average storage cost per apple box(15kg) was 978.3 won for self-storage and 1,771.8 won for consignment storage. For the six(6) months between November and April, the proportion of shipped apples was 91.6% of the total stored apples. The (average total?)annual apple shipment, including apples stored in general storage warehouses, was 744.4 boxes. The (average total?) annual shipment of cold storage apples was 616 boxes. The stored apples were mainly shipped to 'wholesale markets', which have the highest sales share, followed by 'production site collectors' and then 'supermarkets'. The most common shipping method of the apples was by general trucks, followed by low-temperature trucks, and finally by delivery services. The analysis of the factors influencing the decision to release apples by period showed that it was affected by the storage cost, loss rate, and customary shipping in the off-season(from May to August). On the other hand, in the general release season(from November to April), the statistically significant decision factors for the release of apples were the future expected price, storage cost and decision of the leading farmer groups. For farmers with a high share of general shipment, the deciding factors for the release of apples were the future expected price, storage cost, high income expectation, and decision by leading farmers.

• Journal of Korean Society of Forest Science
• /
• v.69 no.1
• /
• pp.56-68
• /
• 1985

This study was conducted (1) to measure the nitrogen content of various parts of trees in a 24-year-old Pinus koraiensis plantation, providing a harvest method with the least impact on the self-serving mechanisms in the nitrogen status of the ecosystem and (2) to examine the seasonal changes in inorganic nitrogen (ammonium salt and nitrate, separately) at various soil depths and to study the self-serving mechanisms for nitrogen at the ecosystem, providing an appropriate method and season for the application of nitrogen fertilizers. The results obtained in this study were as follows; 1) Of the total nitrogen content of the total tree biomass (except for roots), nearly 61.5% was distributed in the needles, 20% in the branches, 5.5% in the stem bark, and 13% in the stem wood. Therefore, the harvest method of removing only wood parts for pulpwood production has little impact on the self-serving mechanisms of the site's nitrogen status. 2) Inorganic nitrogen concentrations decreased with increasing soil depths. The seasonal average concentration of inorganic nitrogen was highest in early spring and decreased in the following descending order; autumn, tollowed by mid-summer, and early summer. This pattern resulted from the fact that the loss of nitrate was greatly influenced by environmental factors. Thus, it was suggested that an application of active nitrogen fertilizer would be appropriate in spring.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.133-144
• /
• 2006

According to the latest report by the Customer Protection Board, those who moved into newly constructed buildings are complaining about unidentified pains, asking for more careful selection of constructive materials for prevention of such potential problems. It is internationally recognized today that ecological materials can serve a significant factor for users' health, environmental protection and better industrial competitiveness. This study examined eco-design aspects of each interior material through web site search, in order to help customers learn about and capitalize on eco materials in a proper manner. As a result, 1. It turned out that the domestic industry are giving an impetus to releasing new eco items focusing on lower VOCs emission or addition of functional components as part of the marketing strategy. However, it is recommended that company understand significance of life cycle, and produce eco-concept materials. 2. The reliable standard for choosing the domestic material is EL, HB, GR marks. It is desirable to enhance recycling technologies and expand the sustainable consumption. customer class, since many recycled items are not developed. 3. The sourcing is a vulnerable part in terms of the concept of being environment-friendly material. Therefore, many manufacturers should design the easy knock-down products and produce the good items using recycled materials instead of new raw materials. Also solutions for making the energy from burning material should be studied. 4. The guidebook or manual with correct information about eco-materials is required to promote production and consumption with sustainable concept. 5. Many manufacturers are emphasizing ecological materials for customers, but some of them intended to disrupt customers' proper selection by promoting even unverified items to be environment-friendly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.510-517
• /
• 2015

Miscanthus has been considered as the most promising bioenergy crop for lignocellulosic biomass production. In Korea, M. sacchariflorus and M. sinensis can be found easily in all regions. It is a great advantage to utilize as important species with respect to genetic and cross-breeding programs materials for creation of novel hybrids. For successful breeding programs, it is important to precisely understand the variability of flowering traits among Miscanthus species as breeding parents materials. In this study, flowering traits were observed daily in 960 germplasms of two Miscanthus species (M. sacchariflorus and M. sinensis) for growing seasons over 2 years. The flowering process was divided into three stages. ST (sprouting time) was recorded when first leaf of the plant emerged on soil. FS1 (flowering stage 1) and FS2 (flowering stage 2) were recorded when flag leaf was firstly observed, and 1 cm of panicle was showing on at least one stem, respectively. For 2013 and 2014, the latest germplasms exerted flag leaf, i.e. September 30 (DOY of FS1 164.1) and September 4 (DOY of FS1 141.0) occurred M. sacchariflorus cv. Geodae 1 and M. sacchariflorus cv. Uram collected from Southern Korea (Jeollanam-do), while Miscanthus germplasms collected from northern Korea (Gyeonggi-do) which emerged the earliest flag leaf in July and August, significantly decreased DOY. For DOY from ST to FS2, M. sacchriflorus germplasms ranged from 140 to 190 days, and 110 to 170 days for 2013 and 2014. The highest frequency showed to 160 days for 2013, and 150 days for 2014. In M. sinensis germplasms, the highest frequency showed to 180 days for 2013, and 170 days for 2014. In the results of correlation between the day of years from ST to FS2 for 2013 and 2014, M. sacchriflorus and M. sinensis showed high coefficient of correlation (0.70 and 0.89). It can be supposed that flowering characteristics of Miscanthus are largely affected by the unique phenotypic characteristic of native habitat than environmental factors of the current planted site. This study for flowering traits of Miscanthus may provides an important information in order to expedite the introduction as breeding materials for creation of new hybrid.

• Journal of Life Science
• /
• v.15 no.3 s.70
• /
• pp.415-422
• /
• 2005

library of the mutants was prepared by transposon mutagenesis of the Mycobacterium bovis BCG. We screened this library for the resistance to an anti-tuberculosis antibiotic, PA-824. Most of the mutants resistant to the PA-824 were not able to synthesize the coenzyme $F_{420}$ which is normally produced by the wild type M. bovis BCG strains. HPLC analysis of the cellular extract showed that one of those mutants which lost the ability to synthesize $F_{420}$ still produced F0. The insertion site of the transposon in this mutant was determined by an inverse PCR and the transposon was found to be inserted in the Rv2435c open reading frame (ORF). Rv2435c ORF is predicted to encode an 80.3 kDa protein. Rv2435c protein appears to be bound to the cytoplasmic membrane, its N-terminal present in the periplasm and C-terminal in the cytoplasm. The C-terminal portion of this protein is highly homologous with the adenylyl cyclases of both prokaryotes and eukaryotes. There are 15 ORFs which have homology with the class III AC proteins in the genome of the M. tuberculosis and M. bovis. Two of those, Rv1625c and Rv2435c, are highly homologous with the mammalian ACs. We cloned the cytoplasmic domain of the Rv2435c ORF and expressed it with six histidine residues attached on its C-terminal in Escherichia coli to find out if this protein is a genuine AC. Production of that protein in E. coli was proved by purifying the histidine-tagged protein by using the Ni-NTA resin. This protein, however, failed to complement the cya mutation in E. coli, indicating that this protein lacks the AC activity. All of the further attempts to convert this protein to a functional AC by a mutagenesis with UV or hydroxylamine, or construction of several different fusion proteins with Rv1625c failed. It is, therefore, possible that Rv2435c protein might affect the conversion of F0 to $F_{420}$ not by synthesizing cAMP but by some other way.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.2
• /
• pp.107-121
• /
• 2010

We conducted a sensitivity test of Joint UK Land Environment Simulator (JULES), in which the influence of biophysical parameters on the simulation of gross primary productivity (GPP) and ecosystem respiration (RE) was investigated for two typical ecosystems in Korea. For this test, we employed the whole-year observation of eddy-covariance fluxes measured in 2006 at two KoFlux sites: (1) a deciduous forest in complex terrain in Gwangneung and (2) a farmland with heterogeneous mosaic patches in Haenam. Our analysis showed that the simulated GPP was most sensitive to the maximum rate of RuBP carboxylation and leaf nitrogen concentration for both ecosystems. RE was sensitive to wood biomass parameter for the deciduous forest in Gwangneung. For the mixed farmland in Haenam, however, RE was most sensitive to the maximum rate of RuBP carboxylation and leaf nitrogen concentration like the simulated GPP. For both sites, the JULES model overestimated both GPP and RE when the default values of input parameters were adopted. Considering the fact that the leaf nitrogen concentration observed at the deciduous forest site was only about 60% of its default value, the significant portion of the model's overestimation can be attributed to such a discrepancy in the input parameters. Our finding demonstrates that the abovementioned key biophysical parameters of the two ecosystems should be evaluated carefully prior to any simulation and interpretation of ecosystem carbon exchange in Korea.

• The Korean Journal of Malacology
• /
• v.32 no.4
• /
• pp.279-287
• /
• 2016

NIFS conducted a feasibility study on the bay scallop Argopecten irradians aquaculture in the test site of Dongsanri, Yangyang-gun, Gangwon-do in June 2015. The transplantation for the test was also carried out in June. The average shell length was $5.79{\pm}0.6mm$ at the time, $15.83{\pm}0.8mm$ in July, $39.40{\pm}0.7mm$ in September, $55.72{\pm}5.8mm$ in November and $59.67{\pm}1.7mm$ in December. At the time of transplantation, the average shell height was $6.06{\pm}0.7mm$, and it grew to $16.40{\pm}0.9mm$ in July, $53.16{\pm}5.2mm$ in November and $55.80{\pm}2.9mm$ in December. Total weight was $0.78{\pm}0.5g$ in July but increased to $24.25{\pm}4.2g$ in November and $26.06{\pm}4.3g$ in December. The daily growth rate of shell length(DGR) was 0.33 mm / day in June, 0.43 mm / day in September and 0.13 mm / day in November. DGR of weight was 0.20 g / day in June, 0.27 g / day in September, 0.06 g / day in November. The relative growth of shell length and shell height was y = 0.9132x and $R^2=0.9923$. As a result, it was proved that bay scallop aquaculture is possible in Gangwon province, the northern part of the East Sea. This will definitely increase the income of fishermen by enabling them to culture more aquaculture species than the single large Patinopecten yessoensis in the region.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.3
• /
• pp.13-24
• /
• 2016

What are the roles and functions of urban gardening created by citizens in Sujin 2-dong, Seongnam-si? This study has looked into urban gardening in everyday life in a bid to find possible solutions for sustainable urban regeneration. The paper has examined the types, functions, and characteristics of urban gardens in Sujin 2-dong, where the urban restoration project is in progress. This study has conducted primarily on-site inspections and interviews. The research findings are as follows. Most urban gardens in Sujin 2-dong have a vertical structure rather than a regular ground-based one due to lack of land. Six major locations of building a garden include the front of a building, rooftop, top of a gate, stairs, wall, and yard. Rooftop gardens are most common and are built mostly for production purposes. Due to architectural characteristics of this village, there are relatively many stair gardens built mostly for aesthetic purposes. The garden in front of a building has served multiple functions, including formation of entry, privacy protection, and prevention of unauthorized parking. Other than those, detached houses have quality urban gardens built with greater effort and care, while multi-household houses have seen a decrease of stair gardens and an increase of vertical gardens due to their comparatively limited space. By utilizing this research, we hope to show that it is important to understand the local's wisdom and voice for a sustainable urban environment as well as keep these findings in mind during the construction of new buildings. This study would be expected to be useful as primary research for urban gardening in everyday life and alternative ways of urban regeneration.