• 자동차안전학회지
• /
• 제10권1호
• /
• pp.45-51
• /
• 2018

There are some ambiguities of the information on the fuel economy provided to the consumers because the standard and the detailed regulations for the fuel economy of the two-wheeled vehicle have not been established in Korea. Since Korea has been a signatory of World Forum for Harmonization of Vehicle Regulations since 1998, it is possible to remove the ambiguities by adopting the WMTC (Worldwide-harmonized Motorcycle Test Cycle) measurement method for the fuel economy of the two-wheel vehicle. As a preliminary study on the WMTC mode fuel economy, road loads measured by coast down method and table method were compared for the two types of two-wheeled motorcycles on sales in domestic market. In the same model, it was confirmed that the deviation of WMTC mode fuel efficiency was below -5% between products. On the other hand, the difference of WMTC fuel economy exceeded 5% between the coast down method and table method.

• 환경영향평가
• /
• 제9권4호
• /
• pp.257-269
• /
• 2000

This study is to investigate the methodology and applicability on emission control by both MECHANICAL Model and Fugitive Dust Model (FDM) through the comparison of field measurement data and calculated data. Comparing to the method of AP-42 emission fector on the production of flying dust the MECHANICAL Model was proved to be more applicable to the calculation emission rate on the various dust emission conditions on a unpaved road. The seperate calculation on annual mean emission amount and a 24working hours amount was undertaken for the easy management of fugitive dust. Dust concentration predicted by FDM is similar with a measurement value.

• Smart Structures and Systems
• /
• 제19권2호
• /
• pp.151-161
• /
• 2017

A new method is developed to estimate road profile in order to estimate IRI based on the ASTM standard. This method utilizes an accelerometer and a Dynamic Tire Pressure Sensor (DTPS) to estimate road roughness. The accelerometer measures the vertical axle acceleration. The DTPS, which is mounted on the tire's valve stem, measures dynamic pressure inside the tire while driving. Calibrated transfer functions are used to estimate road profile using the signals from the two sensors. A field test was conducted on roads with different quality conditions in the city of Brockton, MA. The IRI values estimated with this new method match the actual road conditions measured with Pavement Condition Index (PCI) based on the ASTM standard, images taken from an onboard camera and passengers' perceptions. IRI has negative correlation with PCI in general since they have overlapping features. Compared to the current method of IRI measurement, the advantage of this method is that a) the cost is reduced; b) more space is saved; c) more time is saved; and d) mounting the two sensors are universally compatible to most cars and vans. Therefore, this method has the potential to provide continuous and global monitoring the health of roadways.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.45-55
• /
• 2012

PURPOSES : Skid resistance and noise of roads highly depend on the characteristics of pavement texture. Therefore, estimation of texture characteristics may give useful information for the skid resistance and noise of road. Generally, Sand Patch Test is performed in order to estimate MTD(Mean Texture Depth). However, it is time-consuming and needs traffic control. This study aimed to investigate the effectiveness of measurement texture depth using the Portable Laser Profiler that give the MPD(Mean Profile Depth). METHODS : MTD and MPD were collected on the number of expressway sections including Central Inland Test Road sections in Korea. Statistical analysis are performed to establish the relationship between MTD data based on Sand Patch Test and MPD data obtained by the Portable Laser Profiler. RESULTS : Linear relationship MPD and MTD is observed for both of asphalt pavement and concrete pavement such as R-square of 0.51 to 0.58. CONCLUSIONS : Even though, the test method and definition of MPD and MTD are different. EMTD(Estimated Mean Texture Depth) can be obtained by using the correlationship between MPD with MTD.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.945-949
• /
• 2013

By using information about specific road grades, one can predict the power required by a vehicle. The prediction of the required power enables the driver to choose the driving route with the best fuel economy, which results in cost and energy savings. A clinometer is one of the more simple tools used to measure road grades, but requires significant time and effort. In this paper, a new method for measuring road grades from within a vehicle is proposed and experimentally verified.

• 융복합기술연구소 논문집
• /
• 제4권2호
• /
• pp.67-70
• /
• 2014

Recently EU has been recognized that there is a difference of emission quantity between emission certification test mode and real-road driving test. Accordingly the European Commission is currently preparing to require real-road testing as part of the passenger car type-approval process in the EU. vehicle manufacturers from 2017 are expected to test new vehicles not only under laboratory conditions but also on the real-road, using PEMS equipment. Therefore the purpose of this study is to analyze the emission and Fuel Economy of CVS-75 mode test using chassis dynamometer and RDE test using PEMS equipment by PHEV passenger car.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1199-1204
• /
• 2005

The purpose of field monitoring system in KHC-Test Road located at Joongbu-Inland Highway, is to provide the performance data for traffic and environmental loadings from pavement surface. Among them, water content reflectometers(WCR) are used to measure the volumetric water content of subgrades soils used in test roads. However, most of the WCRs are not well-calibrated based on the field conditions. In this study, the laboratory based test is performed at various density conditions to evaluate the volumetric water content in subgrade Soils with a WCR. Based on the laboratory testings, the effect of density on WCR measurement are well evaluated for predicting the volumeric water content.of subgrades soils in KHC-Test road.

• 대한임베디드공학회논문지
• /
• 제17권3호
• /
• pp.149-155
• /
• 2022

This paper proposes a method for estimating the road surface condition and tilt angle using an inertial measurement unit (IMU) to improve the safety in the use of mobility aids for the elderly. The measurements of the accelerometers of the IMU usually include the accelerations caused by not only the gravitational force but also linear and rotational motions. Thus, the gravitational accelerations are first extracted using several physical constraints and then incorporated into the Kalman filter to estimate the tilt angle. In addition, because the magnitudes of the accelerations produced by the rotational motions (roll and pitch motions) vary with the road surface condition, a criterion based on such accelerations is presented to classify the condition of the road surface. The obtained road surface condition and tilt angle are finally combined to provide the safety information (e.g., safe, warning, and danger) for the user to improve the walking safety. Experiments were carried out and the results showed that the proposed method can provide the condition of the road surface, the tilt of the road surface, and the safety information correctly.

• 소음진동
• /
• 제6권6호
• /
• pp.843-849
• /
• 1996

Locations and emission characteristics of noise source of motor vehicles are great important factors to control the road traffic noise in effective ways. From results of this study on emission characteristics of engine and exhaust noise, we could find that every noise emission of different kind of vehicles has smilar pattern. The main emission locations of engine noise for the front of vehicle became the space between the road surface and bottom of the body and radiator grill, and for the side of vehicle became the space between the road surface and bottom nearby the front wheel. In case of exhaust noise of passenger-car and light truck, all the highest sound intensity level located near surface of road. But it is hard to conclude the height of noise source of driving vehicles with only results of this study. So further studies are needed to check the emission characteristics of noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.612-617
• /
• 2014

It is generally known that the automotive road wheel involves the non-proportional multiaxial loading condition, therefore the measuring dynamic stress and strain in driving state is very important to predict an endurance characteristic of the automotive road wheel. In this study, the ultimate driving test using F1 circuit with respect to 2 kinds of velocity conditions have been carried out in order to measure dynamic stress, strain of the wheel and acceleration of a vehicle. Based on the measured results, the characteristics of dynamic stress generation have been analyzed, and factors which have effect on the dynamic stress generation have been studied.