• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.227-232
• /
• 1995

The model equations including scaling factors to estimate the soil water characteristics curve(SWCC) without direct measurement of soil water tension were developed. Scaling were applied to a data set of soil water content, soil water tension, particle size distribution, and OM contents of the 134 soil samples with the 10 soil textural classes. The capability of the model equations was tested on another 205 soil samples. The parameter, ${\theta}^*$, of soil water contents was used by scale transformation as follows : ${\theta}^*=[{\theta}i-{\theta}(1.5MPa)]$/$[{\theta}(10KPa)-{\theta}(1.5MPa)]$ Using ${\theta}^*$ a model equation to estimate SWCC, which was applicable to all textural classes, was developed as follows: $H(0.1MPa)=0.13{\cdot}({\theta}^*)^{-2.04}$. Other model equations to estimate the water content at the soil water tension of 10KPa [${\theta}(10KPa)$] and 1.5MPa [${\theta}(1.5MPa)$], which are required to ${\theta}^*$ were developed by using scale factors of sand(S) and silt(Si) content and organic matter content(OM) as foilows : ${\theta}(10KPa)=26.80-3.99ln[S]+2.36{\sqrt{[Si]}}+2.88[OM]$ ($R=0.81^{**}$) ${\theta}(1.5KPa)=15.75-2.86ln[S]+0.55{\sqrt{[Si]}}+0.70[OM]$ ($R=0.76^{**}$) The measured and estimated values of ${\theta}(1/30MPa)$ on the 205 soil samples were highly correlated on 1 : 1 corresponding line with $R=0.85^{**}$.

• Journal of Korean Elementary Science Education
• /
• v.31 no.3
• /
• pp.321-333
• /
• 2012

The purpose of this study was to examine elementary school students' characteristics and difficulties in drawing and interpreting a line graph, and to present educational implications. Twenty five students(4th grader: 6, 5th grader: 9, and 6th grader: 10) at an elementary school participated in this study. We used a student's task which was about graphing on a given data table and interpreting his/her graph. The data table was on heating 200mL and 500mL of water and measuring their temperature at regular time intervals. We collected multiple source of data, and data analyzed based on the sub-variables of TOGS. The some results of this study are as follows: First, five children (20.0%), especially two of 10 sixth graders (20.0%), could not construct a line graph about a given data table. Second, twenty students (80.0%) had the ability on 'Scaling axes' and on 'Assigning variables to the axes', however, only a student understood why the time is on the longitudinal axis and the temperature is on the vertical axis. Third, in the case of 'Plotting points', twelve children (48.0%) could drew two graphs on a coordinate. Fourth, in the case of 'Selecting the corresponding value for Y (or X)', twenty student had little difficulty. on 'Describing the relationship between variables', seventeen students (68.0%) understood the relationship between time and temperature of water, and the relationship between temperature and amount of water. Finally, eleven students (44%) had the ability on 'Interrelating and extrapolation graphs.' Educational implications are also presented in this paper.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.2
• /
• pp.275-284
• /
• 2012

Objectives : The purpose of this study was to examine the oral health behavior of shipbuilding company workers in some regions in a bid to provide information on the oral health plans for industrial fields. Methods : The subjects in this study were 310 workers in 10 shipbuilding companies and suppliers in Jeolla Namdo Province, on whom a self-administered survey was conducted. Results : 1. Concerning general information about the subjects who participated in the research, gender was possessed 94.8% by men and 5.2% by women. Age was the largest in 31~40 years old with 44.2%. Marital status was the largest in the married with 64.5%. It was the largest in under high school graduate with 71.9% for academic background, in 2,000,000 won~3,000,000 won with 49.0% for monthly family income, and in cooking with 33.9% for work field. 2. Research subjects' toothbrushing time was indicated to be the largest in after having breakfast. It was indicated to be twice a day with 41.3% for toothbrushing frequency. 90.3% of the respondents are not using auxiliary oral hygiene devices. 3. Recognition on periodontal health status was found larger in workers whose response was that their own periodontal health status is 'healthy' than workers who responded that their status is 'not healthy.' Workers, who don't have subjective symptom on periodontal status, were indicated to be larger. 4. Ratio of subjects with tooth scaling experience accounted for 59.7%. The ratio of tooth scaling experience was indicated to be different depending on academic background and monthly family income. Conclusions : Academic credential, monthly family income and the line of work were identified as the main factors to affect oral health care of the shipbuilding workers. Oral health education and dynamic implementation of corporate oral health promotion which are designed to meet the needs of workers are required.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.3-8
• /
• 2000

This paper describes a development of self tuning scheme for PI and PO type fuzzy controllers. The output scaling factor(SF) is adjusted on-line by fuzzy rules according to the current trend of the controlled process. The rule-base for tuning the output SF is defined on error and change of error for the controlled variable using the most natural and unbiased membership functions. Simulation results demonstrate the better control performance can be achieved in comparison with Ziegler-Nichols(Z-N) PID controllers.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.67.1-67.1
• /
• 2014

Abell 2537 has been regarded as one of relaxed galaxy clusters because the X-ray emission is regular and symmetric, while there is also evidence to the contrary that the brightest cluster galaxy (BCG) is offset from the velocity center. To investigate the dynamical state of A2537 we obtain the redshift information of cluster galaxy candidates using Hectospec mounted on the MMT 6.5 m and compile those in the literature. The velocity distribution of member galaxies appears bimodal, with the main peak including the BCG and a secondary peak at velocity difference ~2000 km s-1. Based on the three-dimensional analysis and statistical tests we conclude that A2537 has at least two substructures and is not fully relaxed from a merger near the line-of-sight. We discuss more about the dynamical state of A2537 based on the color-magnitude diagram and X-ray scaling relation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2322-2329
• /
• 2008

In this study, we introduce the design methodology of an optimized fuzzy cascade controller with the aid of particle swarm optimization(PSO) for ball & beam system. The ball & beam system consists of servo motor, beam and ball, and remains mutually connected in line in itself. The ball & beam system determines the position of ball through the control of a servo motor. We introduce the fuzzy cascade controller scheme which consists of the outer(1st) controller and the inner(2nd) controller as two cascaded fuzzy controllers, and auto-tune the control parameters(scaling facrors) of each fuzzy controller using PSO. For a detailed comparative analysis from the viewpoint of the performance results and the design methodology, the proposed method for the ball & beam system which is realized by the fuzzy cascade controller based on PSO, is presented in comparison with the conventional PD cascade controller based on serial genetic alogritms.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.100-100
• /
• 2003

An image processing algorithm has been developed in order to analyze the nanofiber web images obtained from a high magnification microscope. It has been known that precise pore detection on thick webs is extremely difficult mainly due to lack of light uniformity, difficulty of fine focusing and translucency of nanofiber web. The pore detection algorithm developed has been found to show excellent performance in characterizing the porous structure, thus being a promising tool for on-line quality control system under mass production. Since the images obtained from an optical microscope represent only web surface, a scale factor has been introduced to estimate the web structure as a whole. Resulting web structures have been compared to those by mercury porosimetry, especially in pore size distribution. It has been shown that those two structures have a strong correlation, indicating that scaling of a single layer web structure can be an effective way of estimating the structure of thick fiber webs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.544-556
• /
• 1991

The optimization of many engineering design problems requires a nonlinear programming algorithm that is robust and efficient. A general-purpose nonlinear optimization program IDOL (Interactive Design Optimization Library) is developed based on the Augmented Lagrange Mulitiplier (ALM) method. The ideas of selecting a good initial design point, using resonable initial values for Lagrange multipliers, constraints scaling, descent vector restarting, and dynamic stopping criterion are employed for computational enhancement to the ALM method. A descent vector is determined by using the Broydon-Fletcher-Goldfarb-Shanno (BFGS) method. For line search, the Incremental-Search method is first used to find bounds on the solution, then the bounds are reduced by the Golden Section method, and finally a cubic polynomial approximation technique is applied to locate the next design point. Seven typical test problems are solved to show IDOL efficient and robust.

• Korean Institute of Interior Design Journal
• /
• v.16 no.6
• /
• pp.65-76
• /
• 2007

This research is progressed on the premise that there is a basic rule to organize a space in form generation process. In this study first, antecedent researches are inquired, and formal vocabularies related with form generation in space design are founded. Generally in the organizing process of spatial form designer could have selectively combined formal vocabularies consciously or unconsciously, and these formal vocabularies related with form generation are classified with 'formal elements' and 'spatial relationships'. First, as formal elements '2-dimensional line elements(rectilinear, oblique-linear, curvilinear)' are chosen. Second, formal vocabularies of 'spatial relationships' are 37 extracted from literatures related with architectural language or spatial language. Among them there are several vocabularies with similar or same meaning, they are unitized to representative one. Thereupon 20 vocabularies are finally selected as the formal vocabularies of 'spatial relationships', they are addition, subtraction, intersection, superimposition, juxtaposition, shifting, rotation, reflection, scaling, stretching, shear, bending, folding, distortion, articulation, deconstruction, symmetry, repetition, proportion, and asymmetry.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.6
• /
• pp.907-918
• /
• 2019

Objectives: This qualitative research was conducted to clearly find and clinically understand dental hygienists' work experience in order to lay the legal foundation for their work range and safe execution. Methods: From March 1 to April 30, 2019, seven study participants were selected and participated in-depth interviews. Phenomenological research methodology was applied for intensive analysis. Results: They performed jobs that required no professionalism, such as dental assistance, except for scaling. Dental hygienists, nurses' aids, and dental technicians performed the same jobs regardless of difficulty level and legal work range. Dental hygienists failed to accurately recognize their legal work range. Since there was the wide gap between their legal work range and actual work range, it was necessary to expand the work range in line with actual conditions. Conclusions: Given the results, it is necessary to conduct in-depth discussions within the dental circle to make dental hygienists' work execution in line with reality by improving and discussing a legal system for job assignment and expansion of workers. Therefore, it is required to form a plan for the many jobs dental hygienists executed in a clinical setting.