• Journal of Radiation Protection and Research
• /
• 제19권2호
• /
• pp.147-156
• /
• 1994

환경감마선량 변동을 감시하기 위해 한국원자력연구소 부지 주변에 온라인 감마선량 감시망을 구성하였다. 모니터링 포스트에 설치된 전리함 검출기에 의해 측정된 자료는 무선전송 방식으로 중앙동제소에 전송되어 실시간으로 감시된다. 무선전송 방식은 자료의 전송, 처리 및 저장에 신뢰도가 높고 경제적이었다. 감시시스템은 급격한 선량증가시 조기경보체제와 연결할 수 있게 하였다.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.22-35
• /
• 1992

In highly automated machining centers, intelligent sensor fddeback systems are indispensable on order to monitor their operations, to ensure efficient metal removal, and to initate remedial action in the event of accident. In this study, an on-line tool wear detection system for thrning operations is developed, and experimentally evaluated. The system employs multiple sensors and the signals from these sensors are processed using a multichannel autoegressive (AR) series model. The resulting output from the signal processing block is then fed to a previously tranied artificial neural network (multiayered perceptron) to make a final decision on the state of the cutting tool. To learn the necessary input/output mapping for tool wear detection, the weithts and thresholds of the network are adjusted according to the back propagation (BP) method during off-line training. The results of experimental evaluation show that the system works well over a wide range of cutting conditions, and the ability of the system to detect tool wear is improved due to the generalization, fault-tolearant and self-ofganizing properties of the neural network.

• 융합신호처리학회논문지
• /
• 제12권1호
• /
• pp.50-55
• /
• 2011

본 논문에서는 온라인 쇼핑몰을 대상으로 효과적인 광고 방법을 제시한다. 사용자의 작업 화면과는 별도로 마우스에 장착된 소형 OLED 디스플레이 장치를 통해 광고를 보여준다. 판매자가 판매를 타겟으로 하는 소비자의 정보를 파악한 후 그에 해당하는 상품의 이미지를 인터넷 서버에 카테고리별로 업로드하면, 네트웍을 통해 판매 타겟인 사용자 PC로 전달된다. 전달된 영상 광고는 PC에 연결된 마우스의 OLED 디스플레이 장치로 전송된다. 사용자는 자신이 원하는 광고 카테고리를 선택하고, 선택된 광고는 마우스에 부착된 OLED 디스플레이 장치에 표시하도록 구현하였다. 구매하고 싶은 상품이 OLED 디스플레이 장치에 표시될 때, 마우스에 부착된 버튼을 누르면 해당 상품의 웹브라우저로 직접 연결되어 사용자가 구매 할 수 있도록 하는 수요자 맞춤식 광고시스템을 제안하고 구현하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3122-3127
• /
• 2007

Water resource can be examined using biological sensors. Algae has been one of the biological sensors used to evaluate and monitor the water pollution. The monitoring system, however, could determine whether the examined water was safe or not. It needs additional expensive chemical test to figure out the cause of the water pollution. In this study, an endeavor is given to identify the toxicant in the water using the shape of the chlorophyll fluorescence induction curve(FIC) from algae using monitoring system. Fundamental curves are obtained from the experiments with specified amount of toxicant. Baysian method is utilized to determine the unknown toxicant in the water by comparing it with the fundamental curves. The results shows that the proposed method works fairly well.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.73-78
• /
• 2008

Water resource can be examined using biological sensors. Algae has been one of the biological sensors used to evaluate and to monitor the water pollution. The monitoring system, however, has not been used to determine what kind of the toxicological substance is in the water. It needs additional expensive chemical test to figure out the cause of the water pollution. In this study, an endeavor is made to identify the toxicant in the water using the shape of the chlorophyll fluorescence induction curve(FIC) from algae using monitoring system. Fundamental curves are obtained from the experiments with specified amount of toxicant. Baysian method is utilized to determine the unknown toxicant in the water by comparing it with the fundamental curves. The results shows that the proposed method works fairly well.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 춘계학술대회논문집
• /
• pp.36-47
• /
• 1996

By integrating the eye head-position monitioring devices, the present authors developed an eye-controlled human/computer interface based on the line-of-sight and an intentional blink to invoke commands. Also modified was an existing calibration method to reduce the visual angle between the target center and the intersection point of the derived line-of-sight. This modified calibration method allowed 108 or more command blocks to be displayed on the 14 inch monitor with the target acquisition probability(hit rate) of 98% when viewed at the distance of 500 mm apart. An active triggering method using an intentional blink was proposed and was shown to be a feasible and efficient alternative to invoke commands with total triggering time of 0.8 sec or less. The system could be used by the normal people as well as the handicapped individuals as a new human/computer interface.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.173-176
• /
• 2000

A neural network based controller (NN controller) was studied for the control of ammonia concentrations in biological processes. An ammonia FIA has been employed to on-line monitor the concentrations of ammonia in a bioreactor. The optimal neural network structure was investigated by computer simulation and found to be a 3(inputlayer)-2(hidden layer)-1(output layer). The NN controller had advantage over the PID controller, even though the former is more time consuming. The 3-2-1 NN controller has been used to control the ammonia concentrations in a simulated bioprocess and also in a real cultivation process of yeast, and its performance were investigated.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (3)
• /
• pp.618-620
• /
• 2000

최근 네트워크를 이용한 분산환경에서의 작업이 늘고 있다. 이러한 네트워크 환경에서의 병렬프로그램은 그 수행 과정이 일반 순차 프로그램보다 복잡해서 프로그램 진행과정을 파악하기가 어렵다. 그래서 병렬프로그램을 쉽게 분석할 수 있도록 성능감시기에 대한 연구가 진행되고 있다. 이에 본 논문에서는 JaNeC 환경에서 동작하는 병렬프로그램의 진행과정을 이벤트가 발생하는 동안에 실시간으로 볼 수 있도록 온라인 성능감시기에 대해서 설명한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 1995

A acoustic emission (AE) sensor has been used to monitor tool were during milling process. The relation between tool wear and AE RMS (Root mean Square) signal was investigated experimentally. A avaliable monitoring index for monitoring toolwear was newly extracted form AE RMS. And on-line monitoring program was developed. The proposed monitoring system has verified experimentally by roughing end milling titanium alloy with TIN coated HSS tool.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.607-614
• /
• 2000

A cost-effective automated slope monitoring system is developed to monitor hazardous cut slopes along highways. This automated slope monitoring system consists of data-collection and visual monitoring, data-transmitting, database and internet service, and alarm system. Wire-line extensometer, automatic raingauge, and CCD camera are selected as monitoring instruments in this system, after consideration of failure characteristics of roadside cut slopes in the country. This paper describes the important features of this newly developed automated slope monitoring system.