• Journal of Dairy Science and Biotechnology
• /
• v.22 no.2
• /
• pp.99-106
• /
• 2004

Tumor cell proliferation inhibitory, antioxidative activities and glutathione content were analyzed in a variety of spore forming lactic acid bacteria. Tumor cell proliferation inhibitory activity varied widely depending upon the strains of spore forming lactic acid bacteria and the types of carcinoma cell lines(0${\simn}$56.7%), Bacillus coagulans KTCC3625 has shown a marked antipro-liferative effect against the carcinoma cells and NCL-H1299 human lymphoma cell line tended to be least affected by the spore forming lactic acid bacterial cell extracts. Antioxidative activity analyzed in the lipid peroxidation occurred in all the test strains varied on the strains(5.0 to 52.0%) an extensively high degree of antioxidative activity was demonstrated by three strains of Bacillus coagulans KTCC3625, Bacillus coagulans KTCC1015 and Lactobacillus sporogens CU 815. Concentrations of glutathione were highest in a strain of Lactobacillus sporogenes CU 815 followed by Sporo-lactobacillus inulinus ATCC13538 (5.34 to 8.19 mol/g). Spearmans' rank correlation quotient between cellular GSH levels and linoleic acid peroxidation inhibitory effects of the spore forming lactic acid bacteria revealed highly significant correlation quotient of 0.78. Spearmans' rank correlation quotient between the Caski human cervix carcinoma cell proliferation inhibitory activity and the linoleic acid peroxidation inhibitory effects of the spore forming lactic acid bacteria and that between Caski carcinoma cell proliferation inhibitory activity and the cellular GSH levels were shown to be 0.29 and 0.32,respectively, which means an insignificant positive correlation however.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.80-85
• /
• 2008

Catalytic filter is capable of performing shallow bed dust filtration plus a catalytic reaction, promoted by a catalyst deposited in its inner structure. Such a feature may allow potential cost and space reduction in several environmental applications. Dust filtration and halogenated volatile organic compound (1,2-dichlorobenzene) destruction were carried out in a lab-scale reactor. $WO_3-V_2O_5/TiO_2$ supplied by MaGreen, which showed high catalytic acitivity at low temperature, was used as a catalyst. P-84 that can be operated under $250^{\circ}C$ was used as a felt. The catalytic activity and filtration efficiency of catalytic filters were investigated under the operating conditions, including temperature, face velocity, and dust concentration. The catalytic activity of catalytic filter increased with increasing temperature and the amount of catalyst loaded. The test results showed that the filtration efficiency was primarily affected by the face velocity. Pressure drop variations as a function of time were investigated for a variety of conditions. In case of virgin filter, a dramatic decrease in the pulse interval and a slightly increase in the base line pressure drop were observed. A relatively slow pressure drop build-up was recorded for the catalytic filter due to smooth and slippery surface characteristics of nanofiber. The catalytic filter indicated that high filtration efficiency over 99.98% and high catalytic activity over 90% at 1 m/min and $210^{\circ}C$.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.180-185
• /
• 2005

Purpose: To purpose of this study is to evaluate the clinical and radiological results of arthroscopic meniscus repair using Rapid Loc device. Materials and Methods: A retrospective study was performed on 44 cases which had been turned out longitudinal tear without degeneration. We repaired all cases with Rapid Loc device. Patients were evaluated using clinical examination, Orthopaedische Arbeitsgemeinschaft Knie (OAK) scheme, and MRI. We regarded patients with joint line tenderness, swelling or McMurray positive test as clinical failure. Results: A mean age was 33.3 years and follow-up period was average 15 months. Clinical results were excellent 15 cases(34.1%), good 20 cases(45.5%), fair 7 cases(15.9%), poor 2 cases(4.5%). MRI showed grade 115 cases(33.3%), grade II 22 cases(50%), grade III 7 cases(16.7%). Clinical failures were 8 cases and only one complication was developed. Conclusion: Rapid Loc device showed the excellent results in meniscus repair. We regard it has a lot of advantages in safety, softness, ease, ability to control tension at repair site.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.5
• /
• pp.569-576
• /
• 2002

Background : Chlamydia pneumoniae is one of common causes in upper and lower respiratory infections. Isolating C. pneumoniae from clinical specimens is very difficult due to the characteristics of the organism. Recently, we succeeded in isolating C. pneumoniae from a Korean patient, who suffered from acute pharyngitis. This is the first isolate from a clinical specimen in Korea. Methods : We attained a nasopharyngeal swab from a 22-year-old female patient, and inoculated it on a monolayer of the Hep-2 cell line. After 8 passages, we found the inclusion bodies of C. pneumoniae by an immunofluorescence(IF) test. The species-specific monoclonal antibody IF staining and species-specific PCR were done to confirm the species of the isolate, and electron microscopy was used to characterize the morphology. Results : The isolated was confirmed to be C. pneumoniae by species-specific IF and PCR, and the strain was named LKK-1. The shape of the elementary body was round and with a narrow periplasmic space, as shown by electron microscopy, which is similar to the Japanese strain, but not the Western strain. Conclusion : We succeeded in isolating C. pneumoniae from a 22-year-old patient with acute pharyngitis, which is the first isolate in Korea. In the future, this Korean strain will be useful to the study of C. pneumoniae.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.211-214
• /
• 2016

Geoni, a new variety of Auricularia polytricha, was bred in JARES(Jeollanamdo Agricultural Research and Extension Services) in 2012. Geoni was selected through the monospore hybridization with JNM21008 and JNM21014 in 2010. Based on a performance test conducted from 2011 to 2012, the Geoni was selected from a line showing an excellent light brown pileus and strong pest resistance. Geoni has a favorable chewiness, light brown and smooth pileus. In addition, Geoni was rich in dietary fiber. MCM(mushroom complete medium), Malt and PDA(Potato Dextrose Agar) mediums were suitable for cultivating the Geoni. The number of effective stipes was 39 ea/0.9 kg and minor axis and major axis of pileus were 6.9 cm and 8.7 cm respectively. The yield of Geoni was 291 g/0.9 kg in plastic bag. Geoni was required 40~54 days for culture at $20^{\circ}C$ and 24days for the primordia and growth period, which is longer than that of the control(Pung-un). Somatic incompatibility was formed between parental strains and Geoni. Analysis of the genetic diversity of the new variety "Geoni"revealed a different profile from the parental strains when RAPD(random Amplified Polymorphic DNA) primers were used.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.3
• /
• pp.199-204
• /
• 2006

Objectives: Mercury is a hazardous organ-specific environmental contaminant. It exists in a wide variety of physical and chemical states, each of which has unique characteristics for the target organ specificity. Exposure to mercury vapor and to organic mercury compounds specifically affects the CNS, while the kidney is the target organ for inorganic Hg compounds. Methods: In this study, mercury chloride $(HgCl_2)$ was studied in a renal derived cell system, i.e., the tubular epithelial Madin-Darby canine kidney (MDCK) cell line, which has specific sensitivity to the toxic effect of mercury. MDCK cells were cultured for 6-24 hr in vitro in various concentrations (0.1-100 M) of $HgCl_2$, and the markers of apoptosis or cell death were assayed, including DNA fragmentation, caspase-3 activity andwestern blotting of cytochrome c. The influence of the metal on cell proliferation and viability were evaluated by the conventional MTT test. Results: The cell viability was decreased in a time and concentration dependent fashion: decreases were noted at 6, 12 and 24 hr after $HgCl_2$, exposure. The increases of DNA fragmentation were also observed in the concentrations from 0.1 to 10 M of $HgCl_2$ at 6 hr after exposure. However, we could not observe DNA fragmentation in the concentrations more than 25 M because the cells rapidly proceeded to necrotic cell death. The activation of caspase-3 was also observed at 6 hr exposure in the $HgCl_2$ concentrations from 0.1 to 10 M. The release of cytochrome c from the mitochondria into the cytosol, which is an initiator of the activation of the caspase cascade, was also observed in the $HgCl_2-treated$ MDCK cells. Conclusions: These results suggest that the activation of caspase-3 was involved in $HgCl_2-induced$ apoptosis. The release of cytochrome c from the mitochondria into the cytosol was also observed in the $HgCl_2-treated$ MDCK cells. These findings indicate that in MDCK cells, $HgCl_2$ is a potent inducer of apoptosis via cytochrome c release from the mitochondria.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2739-2746
• /
• 2011

This paper proposes the method for more effectively calculating X/R which is the ratio of equivalent reactance(X) and resistance(R) of the bulk power system and analyses the characteristic of X/R values by applying the proposed method to the real bulk power systems. X/R is used to determine the rating of the relay in the bulk power systems and its value has been accepted to be big enough to ignore the equivalent resistance of the bulk power systems. However, X/R is calculated as a big number when only the upper transformer and transmission line are considered. The correct approach to calculating X/R needs to consider all the parameters including generators, transformers, lines and loads. This paper calculates X/R of the bulk power systems using dynamic models which have been used to analyse the power system stability. The effectiveness of the proposed method is verified by applying it to the test system and X/R values of the real bulk power systems are analyzed. In addition, the dependence of X/R on the closeness of its calculating locations to the generator is verified by using the marginal loss factor which has been used in the electricity market.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.526-534
• /
• 2001

Purpose : The objective of this study is to ascertain whether the positive exists among the frenum length, the tongue movement and the speech and to present the normal range of tongue movement and guidelines for the choice of surgery, observation if necessary. Materials and Methods : 180 patients were evaluated. We divided 180 patients into 6 group by age. Each group was separated as follows; the age of 2.5-4, 5-6, 7-9, 10-12, 16-18. We measured the frenal length, the range of tongue motion and evaluated the speech so that we really questioned about the positive relationship between the tongue-tie and speech. We let the patient exercise the protrusive both(right, left) laterotrusive superior movement of the tongue. During these movements, we measured the distance between the vermilion border and the tongue tip. We also measured the distance from the tongue tip to the point contacting the upper lip with dorsum of the tongue during the maximal protrusive movement of the tongue. Three linear measurement of the anterior, inferior segment of the tongue including the lingual frenum, are made. These measurements are as follows: 1. Distance A. Free anterior portion of the tongue from the point of frenular insertion to the tongue tip. 2. Distance B. The distance from the initiating point of the lingual frenum to the point connecting the two sublingual carundcles to the lingual frenum perpendicularly. 3. Distance C. The distance from the point contacting the line crossing the sublingual caruncles with the lingual frenum to the terminating point of the lingual frenum. We transform three linear measures into a statistical ratio, A/(A-B+C), representing the length of the free portion of the tongue compared with the total sublingual dimensions. In addition, we assessed the speech through Picture Consonant Articulation Test(PCAT) and tried to find out the relationship between the length of the lingual frenum and speech. Conclusion : As people are born, they have small and restricted tongue. As people grow old, tongue motions are more liberate, and unrestricted and they can speak so freely. Therefore we suggest that until age 5, oral and maxillofacial surgeons postpone the surgery if not urgent, evaluate the maximal lingual motions and PCAT according to this article and observe their changes.

• Composites Research
• /
• v.29 no.4
• /
• pp.209-215
• /
• 2016

The failure of composite sandwich structures with thickness and material variation was studied. The main body of the structure is sandwich plate made of the carbon composite face and Aluminum honeycomb core. It is connected with composite laminated flange without core through transition region of tapered sandwich panel with foam core. Tension and compression tests were conducted for the total of 6 panels, 3 for each. Test results showed that the panels under compression are vulnerable to the face failure along the material discontinuity line between two different cores. However the failure load of which panel does not show such failure can carry 16% more load and fails in honeycomb core and face debonding. For the tensile load, the extensive delamination failure was observed at the corner radius which connects the panel and the flange. The average failure load for compression is about 7 times the tensile failure load. Accordingly, these sandwich structures should be applied to the components that endure the compressive loadings.

• Composites Research
• /
• v.29 no.2
• /
• pp.79-84
• /
• 2016

An adhesive can be used to connect two different materials in structures. In comparing with other connecting methods, such as bolt, rivet, and hot melting, the adhesive does not need to use them. It leads to reduce the weight and decrease the stress concentration along the connecting line. This work studied the comparison of mechanical and interfacial properties of commonly-used two adhesives, acrylic type and bisphenol-A epoxy type. Tensile and flexural strength of neat adhesives were also compared. Lap shear test of two adhesives was deduced from the measurement of tensile and fatigue tests. After testing, the failure patterns of adhesive surfaces were observed by a microscope. Tensile strength and mechanical fatigue resistance at using bisphenol-A epoxy adhesive were better than acrylic adhesive. Also adding CNT reinforcement in epoxy adhesive can anticipate mechanical improvement.