• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1807-1813
• /
• 2018

In this paper, the fault line selection and location problems of single line-to-ground (SLG) fault in distribution network are addressed. Firstly, the adaptive filtering property for empirical mode decomposition is formulated. Then in view of the different characteristics showed by the intrinsic mode functions(IMF) under different fault inception angles obtained by empirical mode decomposition, the sign of peak value about the low-frequency IMF and the capacitance transient energy is chosen as the fault line selection criteria according to the different proportion occupied by the low-frequency components. Finally, the fault location is determined based upon the comparison result with adjacent fault passage indicators' (FPI) waveform on the strength of the interaction between the distribution terminal unit(DTU) and the FPI. Moreover, the logic nodes regarding to fault line selection and location are newly expanded according to IEC61850, which also provides reference to acquaint the DTU or FPI's function and monitoring. The simulation results validate the effectiveness of the proposed fault line selection and location methods.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1259-1260
• /
• 2006

Intensive technological research on the Dry-bag CIP equipment was carried out to improve the dimensional accuracy and the productivity. The rubber mold design technology using FEM simulation during pressing was introduced, in order to achieve higher dimensional preciseness, and criteria for the selection of the In-line type or Off-line type, were established based on the powder flowability index proposed by Carr. Based on these research results, high productivity Off-line Dry-bag CIP equipment, which can realize good dimensional accuracy with high productivity, was developed even for non-granulated powders with poor packing density.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.584-585
• /
• 2005

• Nuclear Engineering and Technology
• /
• v.36 no.5
• /
• pp.388-402
• /
• 2004

A phenomena identification and ranking table(PIRT) was developed for a main steam line break (MSLB) event for the Advanced Power Reactor-1400 (APR-1400). The selectee event was a double-ended steam line break at full power, with the reactor coolant pump running. The developmental panel selected the fuel performance as the primary safety criterion during the ranking process. The plant design data, the results of the APR-1400 safety analysis, and the results of an additional best-estimate analysis by the MARS computer code were used in the development of the PIRT. The period of the transient was composed of three phases: pre-trip, rapid cool-down, and safety injection. Based on the relative importance to the primary evaluation criterion, the ranking of each system, component, and phenomenon/process was performed for each time phase. Finally, the knowledge-level for each important process for certain components was ranked in terms of existing knowledge. The PIRT can be used as a guide for planning cost-effective experimental programs and for code development efforts, especially for the quantification of those processes and/or phenomena that are highly important, but not well understood.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.4
• /
• pp.420-427
• /
• 2016

Diverse research on gearing systems have been made to resolve gear NVH problems for many decades, and transmission error (T.E.) has been identified as one of the main sources generating gear noises. While gear profiles and amounts of tooth modifications have influences on gear noise in the design aspect, it is found that bad manufacturing conditions such as burrs, bumps and damage, which result in improper gear operating conditions, produce gear noise with respect to manufacturing process. In this paper, T.E. measurement system was introduced to examine the gears damaged or improperly manufactured, while they are assembled, by comparing T.E. values and various gear conditions with theoretical ones. This T.E. measurement system, following grinding machining process, has been installed in a manufacturing line in 2014, and it results that the transmission rework to resolve manufacturing problems is not needed at the end of line.

• International Journal of Korean Welding Society
• /
• v.3 no.1
• /
• pp.2-7
• /
• 2003

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows; optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4㎾ Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. This application was successfully launched mass production line in 2001. The laser-welded line of side panel consists of 122 stitches totally. And the length is about 2.4m.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.288-296
• /
• 2003

In this study, we present a 260k color TFT LCD driver chip set that consumes only 5 mW in the module, which has exceptionally low power consumption. To reduce power consumption, we used many power-lowering schemes in the logic and analog design. A driver IC for LCDs has a built-in graphic SRAM. Besides write and read operations, the graphic SRAM has a scan operation that is similar to the read operation of one row-line, which is displayed on one line in an LCD panel. Currently, the embedded graphic memory is implemented by an 8-transistor leaf cell and a 6-transistor leaf cell. We propose an efficient scan method for a 6-transistor embedded graphic memory that is greatly improved over previous methods. The proposed method is implemented in a 0.22 ${\mu}m$ process. We demonstrate the efficacy of the proposed method by measuring and comparing the current consumption of chips with and without our proposed scheme.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.123-132
• /
• 2008

This study try introduce a cell manufacturing form and to make the productivity in a conveyor line manufacture for the customer requirement and market change. The case research from JIT theory that made the model to make a productivity enhance through the cell line in a conveyor line and U-line. This research was subject with a cosmetics manufacture company, therefor we can raise the quality enhance, personnel expenses and reduction of delivery effectiveness in a stroke types of industry consequently.

• International Commerce and Information Review
• /
• v.7 no.4
• /
• pp.287-303
• /
• 2005

Mobile Business Companies open its music service and enters into the contents market. The entry of mobile business companies will be able to give diverse benefits to consumer. But, M&A between mobile business companies and contents companies may bring decreasing effect of number of creative industries. For the protection of small company producing cultural contents in contents market, fair transection competition order should be improved as soon as possible.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.67-73
• /
• 2010

This study began the study by instructing enterprises to change Batch Production into U-Line. This study suggested TPS U-Line building model process and applied it to some of their product line. By connecting concerned process elements into continuous operations. Outside orders were also switched to inside operations and executed in continuous operations, thereby about 100Km of transit distance became zero Km, Production lead Time was incredibly reduced. After all, 90% of Production Lead Time, 50% of handling fault, 3/4 of workers decreased and Productivity per Person enhanced which involves improving Batch Production into Continuous Production and applies it to the real world, so that small and medium enterprises can consult this study if the company is willing to make an improvement to their product line.