• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.1-14
• /
• 1980

Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

• Journal of Plant Biotechnology
• /
• v.45 no.2
• /
• pp.117-124
• /
• 2018

The imports of Centella asiatica L. Urban are increasing year-by-year due to the fact that its extract is a raw material used for skin wounds and in cosmetics. However, studies on the cultivation and identification of native C. asiatica species in Korea have been extremely rare. Therefore, this study was conducted in order to investigate the physiological and functional activity of Korean native C. asiatica plant cultivated in Hapcheon, Gyeongsangnam-do, Korea. As a result, the highest antibacterial and anti-inflammatory activities were examined with methanol extract while skin-whitening and wrinkle improvement were examined with water extract. Seven bacterium and one fungus were treated with 50% methanol extracts of C. asiatica and most of the bacterium showed similar or low levels of antibacterial activity compared to the control group of Omiza (Schisandra chinensis) extract, except for Streptococcus pyogenes, which showed higher antimicrobial activity than that of Omiza extract. However, neither C. asiatica and Omiza extracts showed antimicrobial activity against the fungus, C. albicans. The results of anti-inflammatory effect analyses with Raw 264.7 cells confirmed that the treatment of methanol extract reduced the level of NO by 50% or more compared to the control group. In addition, the water extract showed the highest reduction of melanin content of up to 20% more than the control group when examined with B16F10 cell line, indicating a significant skin-whitening effect. Furthermore, we were able to show the significant skin wrinkle improvement caused by C. asiatica extract with NHDF cell as an indicator, but strong cytotoxicity was also observed, suggesting that further studies are necessary.

• Korean Journal of Food Science and Technology
• /
• v.49 no.6
• /
• pp.668-675
• /
• 2017

To assess the physiological effects of Aruncus dioicus var. kamtschaticus extract on cytoxicity of a neuronal cell line, antioxidant activity, and neuroprotection against intensive glucose-induced oxidative stress were quantitated. Compared to the other fractions, the ethyl acetate fraction of Aruncus dioicus var. kamtschaticus (EFAD) showed the highest total phenolics and flavonoids. The 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) assay and malondialdehyde inhibitory effect test confirmed the superior antioxidant activity of EFAD. Moreover, EFAD also decreased the intracellular ROS level and suppressed neuronal cell death against intensive glucose- or $H_2O_2$-induced oxidative stress. Additionally, assessment of ${\alpha}$-glucosidase and acetylcholinesterase inhibitory activities revealed that EFAD was an effective inhibitor of ${\alpha}$-glucosidase and acetylcholinesterase. Finally, high-performance liquid chromatography analysis identified caffeic acid as the main ingredient of EFAD. Overall, these results suggest that the EFAD is a good natural source of biological compounds that counteract hyperglycemic neuronal defects.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.158-165
• /
• 1985

The study was conducted to obtain some genetic information for breeding of mice. Average performance, heterosis and genetic variance were estimated with 362 progenies from a full diallel cross of four lines of mice (BALB/c, CBA, C3H and C57BL). The progenies were reared at the Experimental Animal Farm. College of Agriculture, Kyungpook National University from November, 1984 to February, 1985. Data for litter size. sex ratio, body weight and weaning rate were analyzed into heterosis effects, and genetic variance with Hayman's model. The results obtained are summarized as follows : 1. Average performance was 7.54 in litter size, 53.20 % in sex ratio, 1.55 g in birth weight, 10.45 g in weaning weight and 94.13 % in weaning rate. 2. The estimated heterois was 6.97% in litter size, 7.26 % in sex ratio, 6.08% in birth weight, 3.54% in weaning weight and 2.05% in weaning rate, respectively. 3. Additive gene effects were not observed in litter size, sex ratio, birth weight, weaning weight and weaning rate. In litter size and weaning weight, dominance effects were observed, which were shown due to individual crosses in litter size and were shown mean dominance effects of parental line in weaning weight. Mat-Maternal effects appeared in birth weight and weaning weight, and reciprocal effects were observed in weaning weight.

• Tuberculosis and Respiratory Diseases
• /
• v.71 no.2
• /
• pp.120-125
• /
• 2011

Background: Although the prevalence of pulmonary tuberculosis has progressively decreased all over the world, drug-resistant tuberculosis is major obstacle in treating tuberculosis. This study was performed to examine the current prevalence and risk factors of drug resistant tuberculosis in a single tertiary hospital in Busan, Korea. Methods: We enrolled 367 patients with active pulmonary tuberculosis on a retrospective basis who had undergone mycobacterium culture and drug sensitivity tests between January 2005 and December 2009. We analyzed all clinical and radiographic parameters to find predictors related to drug resistant tuberculosis. Results: At least one incident of drug resistance was found in 75 (20.4%) patients. Isoniazid (18.8%) was the most frequent resistant drug, followed by rifampin (10.9%), ethambutol (7.1%), streptomycin (4.9%), and fluoroquinolone (2.7%). Resistance to second-line drugs was found in 37 (10.1%) patients. Multidrug resistance and extensively drug resistance was evident in 39 (10.6%) and 4 (1.1%) patients, respectively. Using multiple logistic regression analysis, history of previous treatment including relapse (odd ratio [OR], 11.3; 95% confidence interval [CI], 4.92~26.08; p<0.01), treatment failure (OR, 24.1; 95% CI, 5.65~102.79; p<0.01) and an age of below 46 years-old (OR, 3.8; 95% CI, 1.62~8.65; p<0.01) were found to be independent predictors of multidrug resistant tuberculosis. Conclusion: We found that the prevalence of drug resistant tuberculosis was considerably high. A careful consideration for possible drug resistant tuberculosis is warranted in patients with a history of previous treatment or for younger patients.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.293-300
• /
• 2011

This study is conducted to develop an efficient transformation system via particle bombardment with PLBs (Protocorm-like bodies) in Cymbidium. For this, pCAMBIA3301 vector which carries a herbicide-resistant bar gene and gus gene as a reporter gene was used for transformation with Cymbidium cultivars 'Youngflower ${\times}$ masako' line. To select transformants, proper concentration of herbicide, PPT (phosphinotricin), should be determined. As a result, 5 mg/l of PPT was selected as a proper concentration. Further, proper conditions for particle bombardment were determined to obtain a high frequency of transformation. Results showed that 1.0 ${\mu}g$ of DNA concentration, 1,100 and 1,350 psi for helium gas pressure, 1.0 ${\mu}m$ of gold particle and 6 cm of target distance showed the best result for the particle bombardment experiment. Also, pre-treatment with combination 0.2 M sorbitol and 0.2 M mannitol for 4 hrs prior to genetic transformation increased the transformation efficiency up to 2.5 times. Using transformation system developed in this study, 3.2 ~ 4.0 transgenic cymbidium plants can be produced from 100 bombarded PLBs on average. Putative transgenic plants produced in this system confirmed the presence of the bar gene by PCR analysis. Also, leaves from randomely selected five transgenic lines were applied for Basta solution (0.5% v/v) to check the resistance to the PPT herbicide. As a result, three of them showed resistance and one of them showed the strongest resistance with the maintenance of green color as non-transformed plants showed. Using this established transformation system, more genes of interests can be introduced into Cymbidium plants by genetic transformation in the future.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.12-17
• /
• 2015

The purpose of the Monte Carlo simulation study was to provide the optimized nozzle design to satisfy the beam conditions for biomedical researches in the Korean heavy-ion accelerator, RAON. The nozzle design was required to produce $C^{12}$ beam satisfying the three conditions; the maximum field size, the dose uniformity and the beam contamination. We employed the GEANT4 toolkit in Monte Carlo simulation to optimize the nozzle design. The beams for biomedical researches were required that the maximum field size should be more than $15{\times}15cm^2$, the dose uniformity was to be less than 3% and the level of beam contamination due to the scattered radiation from collimation systems was less than 5% of total dose. For the field size, we optimized the tilting angle of the circularly rotating beam controlled by a pair of dipole magnets at the most upstream of the user beam line unit and the thickness of the scatter plate located downstream of the dipole magnets. The values of beam scanning angle and the thickness of the scatter plate could be successfully optimized to be $0.5^{\circ}$ and 0.05 cm via this Monte Carlo simulation analysis. For the dose uniformity and the beam contamination, we introduced the new beam configuration technique by the combination of scanning and static beams. With the combination of a central static beam and a circularly rotating beam with the tilting angle of $0.5^{\circ}$ to beam axis, the dose uniformity could be established to be 1.1% in $15{\times}15cm^2$ sized maximum field. For the beam contamination, it was determined by the ratio of the absorbed doses delivered by $C^{12}$ ion and other particles. The level of the beam contamination could be achieved to be less than 2.5% of total dose in the region from 5 cm to 17 cm water equivalent depth in the combined beam configuration. Based on the results, we could establish the optimized nozzle design satisfying the beam conditions which were required for biomedical researches.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.116-123
• /
• 2018

The sperm quality is determined by the kinetic characteristics and acrosome integrity of the sperm. In the previous studies, analysis of semen quality had large errors because those experiments by using microscope had been conducted by people. In recent years, the molecular biological methods have been newly developed to complement the previous techniques. The ZAR1 gene is known to be a gene that affects early embryonic development in vertebrates, but there is no study of the association with semen. In this study, we analyzed the association between the kinetic characteristics and ZAR1 single nucleotide polymorphism (SNP) genotype. To detect the SNPs, we performed sequencing using genomic DNA from the whole bloods of Duroc pigs. We identified an SNP in the ZAR1 gene g.2540T>C. ZAR1 SNP genotypeing in 105 pigs revealed that the major and minor alleles were T and C, respectively. After we analyzed the association between the kinetic characteristics of sperm and the ZAR1 SNP genotype, we found a significant association in MOT (p<0.01), VSL (p<0.05) of the kinetic characteristics in the Duroc boars. It was confirmed that the boars with T allele were lower in MOT and VSL than C allele. Therefore, pigs with C allele are judged to be better at the MOT and VSL of semen. Based on these results, ZAR1 SNP genotyping may be a useful molecular biomarker to improve semen quality by applying molecular breeding technology.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.2
• /
• pp.136-151
• /
• 1984

The purpose of this study is to find out the linkage relationship of the resistance genes Wbph1 and Wbph2 which are known to be present in the rice cultivar N22 and ARC 10239 respectively, with the genetic markers which are identified as the specific linkage tester. Crosses were made between the resistant parents and the genetic marker stocks and their F$_2$ populations were grown out in the field. The genetic segregations of the marker character were studied and the seeds were harvested individual plant base. These F$_3$ seeds were grown into plant-line base in the greenhouse and their responses to the whitebacked planthopper were tested. Then the linkage relationship between the F$_2$ plant marker character and the F$_3$ resistance responses to the whitebacked planthopper were examined. In the F$_2$ generation of the crosses between the resistant parent N22 and the genetic marker stocks, the genetic markers, such as lg, d-t, g, la, bl and gl, showed the segregation of 3 dominance to 1 recessiveness, and the Bh marker segregated into 9:7 ratio. Another 4 marker genes, such as Cl, gh, Lh and bc, did not show the good fittness to the expected value. In the F$_2$ generation of the crosses between the resistant parent ARC 10239 and the genetic marker stocks, the genetic markers, such as Cl, lg, Pn, g, la, bl and gl, showed the segregation of 3 dominance to 1 recessiveness, and the Bh gene segregation fitted well to the 9:7. The rest 4 genetic markers, such as gh, Lh, nl and be, did not show the good fitness to the expected ratio. The resistance genes Wbphl of N22 and the Wbph2 of ARC 10239 appeared to be single dominant gene each. The Wbphl gene was linked with the marker gene, liguleless (lg) of linkage group II with the recombination value of 36.8%, and with the black hull (Bh) with the value of 35.9%. The Wbph2 gene appeared to be independent of all the markers tested here, such as Cl, lg, Pn, g, Lh, la, nl, bl, bc, gl, Bh, of linkage gtoup I, II, III, IV, VI, VII, VIII, IX, X, XI, and XII respectively. That the Wbph2 linkage relations were not investigated was regarded as the causes that the tested marker genes on the chromosome were located with the resistance gene at the distant loci, and of the phenctypic properties of the marker characters. The Wbph2 linkage relations should be reexamined in the cross combinations of linkage group Ⅶ, Ⅷ, Ⅹ and XII including linkage group V which was not tested in this experiment.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.87-98
• /
• 2016

During the period between July 3 and 27 of 2009, water samples were collected from the Russian coast at a depth of 30m from 26 stations (including Ulleung and Japan basins) onboard the Russian survey vessel R/V Lavrentyev following 4 lines (D, R, E, and A). The samples were analyzed for nutrients and chlorophyll a contents. All parameters exhibited higher values in warm waters than in cold waters ($NH_4:1.8-fold$, $PO_4:1.8-fold$, $SiO_2:1.2-fold$, and chlorophyll-${\alpha}$:1.9-fold), except nitrates, which was 1.4-fold higher in cold waters than in warm waters. The horizontal distribution of ammonia, phosphate, and chlorophyll-${\alpha}$ was very similar to each other and showed the highest values in the waters near Russia, where a upwelling influence of cold current and bottom water prevails, while relatively low distribution was observed at the Ulleung Basin. On the other hand, nitrates showed the highest concentration at the Ulleung Basin, which is under the direct influence of the Tsushima warm water, and showed a gradual decrease northward. The N/P ratio showed the highest value in the Tsushima middle water, rather than in the North Korean Cold Water, the Tsushima Warm Water was the primary source of nitrate flow into the East Sea. However, the average concentration of phosphate in the warm waters was < $0.2{\mu}M$, thereby limiting phytoplankton growth, while a high concentration of phosphate in cold waters showed a direct correlation with chlorophyll-${\alpha}$. The results of principal component analysis for the identification of primary factors that influence the marine environment showed that principal component I was water temperature and principal component II was influenced chlorophyll-${\alpha}$ and nutrients. Therefore, Study area has greatest influenced by water temperature, and clearly distinct cold and warm water regions were observed in the East Sea.