• 소프트웨어공학소사이어티 논문지
• /
• 제29권2호
• /
• pp.1-6
• /
• 2020

소프트웨어 제품라인 개발은 제품군의 개발을 위하여 공통적인 부분과 가변적인 부분을 분리 개발함으로써 중복개발을 피하여 효율적으로 제품군을 개발하는 개발 패러다임이다. 소프트웨어 제품라인 개발에서 제품군을 생성하기 위해 사용되는 소스코드를 제품라인 코드 베이스라고 부르고, 제품라인 코드 베이스가 변경되어 제품군의 제품들이 영향을 받을 때 영향 받은 제품들을 시험하는 활동을 제품라인 회귀시험이라고 한다. 이 때 제품군의 각 제품을 개별적으로 시험하는 대신, 변경과 무관한 시험을 파악하여 피할 수 있다면 효율적인 제품라인 회귀시험이 가능해 질 것이다. 본 논문은 이런 방법으로 소프트웨어 제품라인 회귀시험을 효율적으로 수행하는 자동화된 방법인 SRTS를 소개한다. 이 방법은, 먼저 제품라인 코드 베이스와 시험 항목을 공통성과 가변성을 기반으로 나누고 변경에 영향을 받는 시험 항목을 식별하여 선택한 후, 선택된 시험 항목만을 재실행함으로써 불필요한 시험을 줄인다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.111-114
• /
• 2008

The paper considers the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.472-480
• /
• 2007

This paper analyzes overvoltage on testing line for various parameter effect examination. Model systems consist of overhead line and underground cable. The model considered actual characteristic data of distribution lines. and will be constructed at testing yard. The simulations were performed under various line configuration such as cable kinds, cable length, lightning wave, lightning wave time, transformer and branch circuits. The simulation models are established by EMTP/ATPDraw and Line Constants are calculated by ATP_LCC. When lightning surge strikes on conductor of overhead line, EMTP/ATPDraw calculates overvoltage in many cases. Simulation results will be compared with real testing results at testing yard. The compared results will be used to establish protection methods in actual underground distribution systems.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.103-105
• /
• 2008

In, this paper, we consider the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PO) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PO testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PO measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.2008-2009
• /
• 2007

The paper considers the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is introduced.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권8호
• /
• pp.313-321
• /
• 2006

This paper describes the overvoltage obtained by surge behavior analysis in testing underground distribution systems. Model systems consist of overhead distribution line and underground cable. Such model system considered various characteristics of actual distribution systems will be soon constructed at testing yard. Simulation is carried out under various states such as cable kinds, cable length, lightning wave and time, and branch circuits. Model is established by EMTP/ATPDraw. Line Constants are calculated by ATP_LCC. When the direct lightning surge strikes on conductor of overhead line, the overvoltage is calculated using EMTP/ATPDraw in many cases. Simulation results will be compared with real testing results at testing yard in the near future. The compared results will be used to establish protection methods in actual underground distribution systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권3호
• /
• pp.932-951
• /
• 2021

The effectiveness of testing in Model-based Testing (MBT) for Software Product Line (SPL) can be achieved by considering fault detection in test case. The lack of fault consideration caused test case in test suite to be listed randomly. Test Case Prioritization (TCP) is one of regression techniques that is adaptively capable to detect faults as early as possible by reordering test cases based on fault detection rate. However, there is a lack of studies that measured faults in MBT for SPL. This paper proposes a Test Case Prioritization (TCP) approach based on dissimilarity and string based distance called Last Minimal for Local Maximal Distance (LM-LMD) with Dice-Jaro-Winkler Dissimilarity. LM-LMD with Dice-Jaro-Winkler Dissimilarity adopts Local Maximum Distance as the prioritization algorithm and Dice-Jaro-Winkler similarity measure to evaluate distance among test cases. This work is based on the test case generated from statechart in Software Product Line (SPL) domain context. Our results are promising as LM-LMD with Dice-Jaro-Winkler Dissimilarity outperformed the original Local Maximum Distance, Global Maximum Distance and Enhanced All-yes Configuration algorithm in terms of Average Fault Detection Rate (APFD) and average prioritization time.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제11권7호
• /
• pp.273-282
• /
• 2022

구성가능한 소프트웨어 제품라인 시험은 모든 멤버제품들에 포함되는 공통 부분과 일부 또는 단일 제품에 포함되는 가변 부분을 고려해야 하기 때문에 단일 제품 시험 방법들을 그대로 적용하기 어렵다. 소프트웨어 시스템 시험에서 시험 커버리지는 수행된 시험의 적절성을 측정하는 척도이다. 구성가능한 소프트웨어 제품라인으로부터 생성될 수 있는 멤버제품들은 수백 개에 이를 수 있기 때문에 시험 커버리지 측정은 소프트웨어 제품라인 수준에서 시험의 적절성을 평가하기 위해 중요하다. 이 논문은 구성가능한 소프트웨어 제품라인 시험에서 제품라인 수준의 코드 커버리지 측정 방법을 제안한다. 제안한 방법은 피처 집합의 포함 관계를 기준으로 제품들을 계층화한 후 제품라인의 멤버제품들을 시험하고, 시험으로부터 얻어진 각 제품의 시험 커버리지들을 종합하여 SPL 시험 커버리지를 정량화한다. 제안한 방법을 11개의 구성가능한 소프트웨어 제품라인 사례에 적용하여 검증한 결과, 제안한 방법은 SPL 시험이 얼마나 철저하게 수행되었는지를 정량적으로 기술하여 SPL 시험의 적정성을 확인할 수 있도록 도왔다. 또한, 새로 추가된 SPL 멤버제품의 시험이 이전 멤버제품 시험 대비 커버리지를 증가시키는 방향인지 확인할 수 있어 새로운 시험케이스들이 멤버제품들 간의 차이를 커버하는 방향으로 시험이 이루어지고 있는지 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.2114-2115
• /
• 2008

We consider the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers is described.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.529-530
• /
• 2007

The paper considers the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.