• 산업기술연구
• /
• 제22권A호
• /
• pp.49-57
• /
• 2002

The accurate wind speed information at the hub height of a wind turbine is very essential to the exact estimation of the wind turbine power performance testing. Several methods on the site calibration, which is a technique to estimate the wind speed at the wind turbine's hub height based on the measured wind data using a reference meteorological mast, are introduced. A site calibration result and the wind resource assessment for the Taekwanryung test site are presented using a one-month wind data from a reference meteorological mast and a temporal mast installed at the site of wind turbine. From this analysis, it turns out that the current location of the reference meteorological mast is wrongly determined, and the self-developed codes for the site calibration are working properly. Besides, an analysis on the uncertainty allocation for the wind speed correction using site calibration is performed.

• 한국측량학회지
• /
• 제34권4호
• /
• pp.349-356
• /
• 2016

This study investigates two camera self-calibration approaches, on-site self-calibration and laboratorial self-calibration, both of which are based on self-calibration theory and implemented by using a commercial photogrammetric solution, Agisoft PhotoScan. On-site self-calibration implements camera self-calibration and aerial triangulation by using the same aerial photos. Laboratorial self-calibration implements camera self-calibration by using photos captured onto a patterned target displayed on a digital panel, then conducts aerial triangulation by using the aerial photos. Aerial photos are captured by an unmanned aerial vehicle, and target photos are captured onto a 27in LCD monitor and a 47in LCD TV in two experiments. Calibration parameters are estimated by the two approaches and errors of aerial triangulation are analyzed. Results reveal that on-site self-calibration excels laboratorial self-calibration in terms of vertical accuracy. By contrast, laboratorial self-calibration obtains better horizontal accuracy if photos are captured at a greater distance from the target by using a larger display panel.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2250-2257
• /
• 2004

The accurate wind speed information at the hub height of a wind turbine is very essential to the exact estimation of the wind turbine power performance testing. Several methods on the site calibration, which is a technique to estimate the wind speed at the wind turbine's hub height based on the measured wind data using a reference meteorological mast, are introduced. A site calibration result and the wind resource assessment for the TaeKwanRyung test site are presented using three-month wind data from a reference meteorological mast and the other mast temporarily installed at the site of wind turbine. Besides, an analysis on the uncertainty allocation for the wind speed correction using site calibration is performed.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.107-112
• /
• 2011

A comparison study between two performance testing results, one is on the site calibration not needed and the other is needed, was proceeded for the understanding on the effect of site calibration on the complex terrain. As a result, it is revealed that all of uncertainty components is effected by the topographical features dramatically. And the maximum difference of uncertainty reached at around 8% of rated capacity of wind turbine. So, the site calibration is an effective method to remove the variable wind effect by the ground complexity and must be proceeded before the power performance testing of a wind turbine.

• 산업기술연구
• /
• 제25권B호
• /
• pp.157-164
• /
• 2005

Two methods, the bin averaging method and least square method, are often used in calibrating wind turbine test sites. The objective of this work was to determine a better method to predict the wind speed at wind turbine installing point. The calibration was done at the test site on a complex terrain located in Daegwallyeong, Korea. It was performed for two different cases based on the IEC 61400-12 power performance measurement standard. The wind speeds averaged for 10 minutes ranged between 4 m/s and 16 m/s. The wind-direction bins of each meteorological mast were 10 degrees apart, and only the bins having data measured for more than 24 hours were employed for the test site calibration. For both cases, the two methods were found to yield almost same results which estimated real wind speed very closely.

• 한국정보통신학회논문지
• /
• 제20권9호
• /
• pp.1808-1815
• /
• 2016

댐 및 하천의 안정적인 운영은 국민의 생명 및 재산과 직결되는 상황으로 수문관측 데이터 신뢰성 확보는 안전재난 대비에 필수 요소이며, 과학적이고 신뢰성 있는 수자원 관리를 위하여 수위 데이터에 대한 실시간 자료 확보와 신뢰성 있는 데이터가 필요하나, 현재 운영되고 있는 댐이나 하천 상하류의 수위계는 신뢰성 확보를 위하여 현장에서 검교정이나 보정 등이 쉽지 않은 실정이다. K-water연구원에서는 유량계, 우량계, 수위계에 대한 국제공인 교정기관으로 운영중에 있으며, 우량계는 표준교정실 및 현장교정시스템을 이용하여 표준실 및 현장교정을 하고 있으나, 수위계는 표준교정실에서 실내 교정만 수행하고, 현장교정은 현장교정 절차서 및 시스템의 부재로 현장 교정을 하지 못하는 실정이다. 따라서, 수위계를 현장에서 교정할 수 있는 표준교정절차서 및 시스템을 개발하여, 수문관측 데이터의 신뢰성을 향상시키고자 한다.

• Journal of Astronomy and Space Sciences
• /
• 제26권4호
• /
• pp.659-666
• /
• 2009

탑재체에 따른 위성의 임무가 다양하듯이, 적합한 검보정(Calibration & Validation)을 위한 작업은 탑재체에 따라 특정적인 요소를 가진다. SAR(Synthetic Aperture Radar) 위성의 경우에는 전파를 사용하여 물체를 인식하므로, 검보정을 위해서 특정한 형태로 전파를 반사하는 목표물을 지상에 설치하여야 한다. 또한 이 목표물은 설계된 위성궤도에서 지상목표물을 획득할 수 있도록 하여야한다. 상기의 목적을 달성하기 위해서는 우선적으로 검보정을 위한 사이트를 면밀히 분석하여야 한다. 여기에서는 상대방사보정(Relative Radiometric Calibration)과 절대방사 보정(Absolute Radiometric Calibration) 중에서 후자를 위한 반사기의 점표적 설치를 위해 적합한 검보정 사이트에 대한 고찰을 하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권2호
• /
• pp.253-259
• /
• 2016

The typical method for performing an absolute radiometric calibration of a Synthetic Aperture Radar (SAR) System is to analyze its response, without interference, to a target with a known Radar Cross Section (RCS). To minimize interference, an error-free calibration site for a Corner Reflector (CR) is required on a wide and flat plain or on an area without disturbance sources (such as ground objects). However, in reality, due to expense and lack of availability for long periods, it is difficult to identify such a site. An alternative solution is the use of a Triangular Trihedral Corner Reflector (TTCR) site, with a surrounding protection wall consisting of berms and a hollow. It is possible in this scenario, to create the minimum criteria for an effectively error-free site involving a conventional object-tip reflection applied to all beams. Sidelobe interference by the berm is considered to be the major disturbance factor. Total interference, including an object-tip reflection and a sidelobe interference, is analyzed experimentally with SAR images. The results provide a new guideline for the minimum criteria of TTCR site design that require, at least, the removal of all ground objects within the fifth sidelobe.

• 한국측량학회지
• /
• 제31권1호
• /
• pp.99-107
• /
• 2013

최근 측량장비의 발달 및 사용확대와 더불어 국토지리정보원의 네트워크 RTK 측량 기반조성으로 인하여 네트워크 RTK 측량이 측량산업 전반에 많이 활용되고 있다. 현재 공공측량작업규정에는 네트워크 RTK 측량 성과를 수준측량에 적용하기 위해서는 작업지역에 균등하게 분포한 5점 이상의 수준점을 사용하여 사이트 캘리브레이션을 한다고 되어있다. 그러나 지오이드의 기복에 따라 사이트 캘리브레이션이 가능한 수준점 간의 거리와 필요한 점의 수가 다를 수 있다. 본 연구에서는 이를 검증하기 위해 지오이드 기복이 완만한 인천지역과 지오이드 기복이 큰 태백지역을 대상으로 네트워크 RTK 측량을 수행하고 사이트 캘리브레이션에 사용되는 기준점 간의 거리별, 기준점 개수별로 정확도를 비교하였다. 본 연구의 결과 공공측량 규정에서 정한 수직정밀도(0.1m) 허용범위에 들기 위해서는 네트워크 RTK 측량의 사이트 캘리브레이션에 사용되는 기준점의 수와 점간 거리를 상호보완적으로 적용할 수 있는 공공측량작업규정의 개선이 필요함을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.35.2-35.2
• /
• 2011

A wind turbine power performance test is very important to wind turbine manufacturers because a wind farm developer or planner must want to define power performance characteristics and reliability of new wind turbines. Based on the IEC 61400-12-1, A wind turbine test site has to be nicely installed at flat terrain for testing. We are developing the wind power system which is IEC wind class IIa model with rated power of 3MW. KEPCO's Gochang power testing center was considered as candidates to build the test site without site calibration. This paper aims to verify the validity of the test site by using implement site assessment result that was based on IEC 61400-12-1.